similar to: H323 Configuration file

Hi all, i have big problems to make a h323 call over the gatekeeper from my provider. The provider demanded following account data: H323 ID: XXX-XXX-XX-X DetinationNumer: XXXXXXXXXXX I have configured the oh323.conf following: gatekeeper=XX.XX.XXX.XXX alias=XXX-XXX-XX-X Isx the alias equal to the h323id ? And how i have to make a call with the dial app ? I have following config: exten

Hi, I've oh323 chan installed and working to make calls from SIP to H323 devices. The problem is can no hear sound with the H323 device. I think this is some related with codecs o nat, because the H323 have one public IP from a different subnet from the asterisk box. If I use netmeeting in gateway mode, the call can be completed and I can talk with a SIP device, but in gateway mode I can not

What is the configuration of H323.conf and openphone in order to run openphone and asterisk together ?

I've configured Asterisk 0.7.2 to work together with Cisco ATA186 (SIP,G.711. RFC2833) and OpenPhone (H.323, G.711). But there is an issue while calling from ATA186 to OpenPhone via Astrisk - when I press any key on analogue phone connected to ATA, Asterisk shows following message: -- Executing Dial("SIP/519-3781", "OH323/62.213.36.100|20|Tt") in new stack --

For the benefit of everyone, having H323 Configuration problem due to H245 Tunnel, check the h323 Config embeded at the end. Comment the offending line as under: ; ; Enable H.245 tunnelling (yes,no). ; h245Tunnelling=yes ; -----Original Message----- From: Tola Ogunsan [mailto:tolaniye@hotmail.com] Sent: Wednesday, May 25, 2005 1:03 PM To: Kanuri, Seshu (Company IT) Subject: RE: oh323 problems

I have tried everything. to register with this gatekeeper to make and receive calls These are the details I received from the voip provider: protocol H.323 Gatekeeper Address - AVS@210.21.118.XXX Port - 1719 RAS - 53 Q931 - 80 h245 - 1722 RTP - 1722 Username - H323 I have 2 phone number/accounts with this gatekeeper that I need to register to. ID - HMA0200.10szxn-xxxx e.164 - 22xx2912

Can any body give me an example how to configure h323 in Asterisk. Which files do I need to configure? just extensions.conf and h323.conf ? Thanks, Patricio _________________________________________________________________ Descubre la descarga digital con MSN Music. M?s de un mill?n de canciones. http://music.msn.es/

Hi, ALL: I install my oh323 channel driver following steps of http://www.oinko.net/astrecipes/index.php?action=artikel&cat=270174&id=10&artlang=en I works my asterisk well before install the chan_oh323.so. But after I do "make install" the oh_323, my asterisk crash and show me the following message (asterisk -vvvvvvc). Does anyone have any idea about it? What's wrong

Hi, I am using the Grandstream HandyTone 486 as a SIP Adapter with a regular phone. Asterisk configuration is listed below. When I attempt to place a H.323 call, I receive the following errors: - Executing Dial("SIP/2000-3029", "OH323/##########@xxx.xxx.xxx.xx:1720|20") in new stack Aug 13 09:13:03 WARNING[20497]: channel.c:1806 ast_request: No translator path exists

Send these questions to Asterisk-Users mailing list. h323.conf ################################################## ; ; Configuration file of OpenH323 channel driver ; [general] listenAddress=W.X.Y.Z ; local ip listenPort=1720 tcpStart=10000 tcpEnd=20000 udpStart=10000 udpEnd=20000 fastStart=yes h245Tunnelling=yes h245inSetup=yes jitterMin=20 jitterMax=100 ipTos=none outboundMax=100

Hello all, It's me again. I would like play with calls between a H.323 client and a SIP client through * inside my LAN. For that, on host 192.168.1.20, I use GnomeMeeting (GM20) and Asterisk; on host 192.168.1.25, I use SJphone (SJ25) as SIP client on Windows and I register into * with a username, no password. The 3 files oh323.conf, sip.conf, extensions.conf are in attachment. In the same

I wonder if anyone can help me? Am trying to terminate to H323 Vegastream. I'm using OH323 with little success. I can dial out and answer but voip end just keepings ringing and ringing. Thanks for any help. Neil Config file: [general] listenAddress=ALL listenPort=1720 tcpStart=10000 tcpEnd=20000 udpStart=10000 udpEnd=20000 fastStart=no h245Tunnelling=no h245inSetup=no jitterMax=100

hi, we are using a voip h323 switch. the switch sends all caals to our Gatekeeper (gnugk). gnugk musst send all calls to asterisk and asterisk must do his choice (sip endpoint or out to PSTN) Making calls to our h323 switch works fine over asterisk. what must i configure to get inboung h323 calls from our gnugk to asterisk? any hints for me? thx -- Thomas K?pper 01063 Telecom GmbH &

Dear friends, I have compiled and installed h.323 in my asterisk. And I have a service from a H.323 VoIP provider who give me user, password and gatekeeper IP address. All configured. But when I start my asterisk i receive the following error and h.323 calls can not be making and/or receiving. [chan_h323.so]=> (The NuFone Network's Open H.323 Channel Driver) == Parsing

Hi, I just installed OH323 Plugin and im now tryin to make simple Configuration to connect Openphone and Xlite to my Asterisk-Server. All works fine, i just wanna know if there's a better way to do it? Is there anything wrong with my Config? OH323.conf [general] listenAddress=0.0.0.0 listenPort=1720 connectPort=1720 tcpStart=10000 tcpEnd=20000 udpStart=8000 udpEnd=8005 fastStart=no

hello i am using asterisk-oh323-0.7.1. i want to convert sip call to h323 (h323 sjphone or h323 proxy). what could be the best way for this. i am successfull in converting h323->sip by using asterisk as gateway. help required on sip->h323. kamran __________________________________ Celebrate Yahoo!'s 10th Birthday! Yahoo! Netrospective: 100 Moments of the Web

Hi, i'm trying to setup Asterisk to work with GnuGK using the Openh323 channel driver. I have a Gatekeeper that gets H.323 calls from a Cisco GW. To this Gatekeeper I've registered some endpoints, Cisco ATA186, Snom 100, etc. Now i want send the numbers 083xxx into Asterisk. Easy, i'll just enter something like this into oh323.conf: gwprefix=083 And all my calls starting with 083

Hi, I use with asterisk gnugk a gatekeeper for h323 client. I don't understand why asterisk can't have the H323-ID (callerID). In the gatekeeper's monitor I have this H323-ID but not in asterisk. Does anyone know something about it, or how can I send a caller ID to asterisk ? Rattana -------------- next part -------------- An HTML attachment was scrubbed... URL:

OOH323 Debugging Enabled -- Executing Answer("SIP/3513-090f7d40", "") in new stack -- Executing Wait("SIP/3513-090f7d40", "1") in new stack -- Executing DeadAGI("SIP/3513-090f7d40", "a2billing.php|1") in new stack -- Launched AGI Script /var/lib/asterisk/agi-bin/a2billing.php a2billing.php|1: line:58 - IDCONFIG : 1

Hello, i want to use asterisk as a gateway for H323-Phones. But i cant get it work. I'm using a gatekeeper on another computer. My IP-phone is registered there. Does anybody can sent me an oh323.conf and extension.conf as examples? Thanks in advance Erik Bastian -- NEU : GMX Internet.FreeDSL Ab sofort DSL-Tarif ohne Grundgebühr: http://www.gmx.net/dsl