Anyone have any luck with connecting Asterisk to the Panasonic KX-TD500. I have Asterisk connected via crossover to the TE110P. We are able to make internal calls into the Asterisk Box but the PBX vendor (I know nothing about the KX-TD500) tells us it is not possible route DID over the trunk. I find this hard to believe. Anyone have any luck with this? Thanks! -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050718/b9523c14/attachment.htm
On Mon, 18 Jul 2005, Guy C. Guckenberger wrote:> Anyone have any luck with connecting Asterisk to the Panasonic KX-TD500. > I have Asterisk connected via crossover to the TE110P. We are able to > make internal calls into the Asterisk Box but the PBX vendor (I know > nothing about the KX-TD500) tells us it is not possible route DID over > the trunk. I find this hard to believe. Anyone have any luck with this?It depends on what T1/E1 card you have in the Panasonic, I think. It most certainly depends on what you are trying to accomplish. On the 500 it _is_ possible to set up a dialplan that will route some extensions out over a PRI link. That is one of the qualitative differences between the KX-TD1232/KX-TD816 and the KX-TD500. So, what kind of trunk card do you have in the Panasonic and what do you expect it to do? Peter
The T1 card is a KX-TD50290 ISDN PRI Card. The configuration is PSTN <--> Panasonic <--> Asterisk* Thanks -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Peter Svensson Sent: Monday, July 18, 2005 7:06 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] Panasonic KX-TD500 On Mon, 18 Jul 2005, Guy C. Guckenberger wrote:> Anyone have any luck with connecting Asterisk to the PanasonicKX-TD500.> I have Asterisk connected via crossover to the TE110P. We are able to > make internal calls into the Asterisk Box but the PBX vendor (I know > nothing about the KX-TD500) tells us it is not possible route DID over > the trunk. I find this hard to believe. Anyone have any luck withthis? It depends on what T1/E1 card you have in the Panasonic, I think. It most certainly depends on what you are trying to accomplish. On the 500 it _is_ possible to set up a dialplan that will route some extensions out over a PRI link. That is one of the qualitative differences between the KX-TD1232/KX-TD816 and the KX-TD500. So, what kind of trunk card do you have in the Panasonic and what do you expect it to do? Peter _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
We have Panasonic D500 and Asterisk with TE110P hybrid setup successfully
and it is possible to route DID to a PRI card in D500 if it is set up as EXT
card, and extension "number" of PRI card is defined for example as
2XX. This
gives you opportunity to have extensions 200 - 299 routed to PRI interface
in Panasonic D500 and after that setting up DID routing is easy.
On the other hand, in that configuration we have an echo problem with the
calls that entered Panasonic through the first PRI card connected to Telco,
and that got picked up by any EXT of Panasonic, and then got transferred to
the Asterisk extensions which are SIP phones (over that second PRI interface
in D500 connected to a TE110P).
Also we have a problem with SpanDSP as a FAX in that configuration (call to
a FAX DID on Asterisk ends after a 3-4 seconds).
Both this issues don't happen when the Asterisk is connected directly to a
Telco.
Regards,
Nenad
> On Mon, 18 Jul 2005, Guy C. Guckenberger wrote:
>
>> Anyone have any luck with connecting Asterisk to the Panasonic
KX-TD500.
>> I have Asterisk connected via crossover to the TE110P. We are able to
>> make internal calls into the Asterisk Box but the PBX vendor (I know
>> nothing about the KX-TD500) tells us it is not possible route DID over
>> the trunk. I find this hard to believe. Anyone have any luck with
this?
>
> It depends on what T1/E1 card you have in the Panasonic, I think. It
> most certainly depends on what you are trying to accomplish.
>
> On the 500 it _is_ possible to set up a dialplan that will route some
> extensions out over a PRI link. That is one of the qualitative differences
> between the KX-TD1232/KX-TD816 and the KX-TD500.
>
> So, what kind of trunk card do you have in the Panasonic and what do you
> expect it to do?
>
> Peter
This is good info. Has anyone else had this success? Can anyone address
the ECHO issue?
Thanks
-----Original Message-----
From: asterisk-users-bounces@lists.digium.com
[mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Nenad
Radosavljevic
Sent: Tuesday, July 19, 2005 1:58 AM
To: asterisk-users@lists.digium.com
Subject: [Asterisk-Users] Re: Panasonic KX-TD500
We have Panasonic D500 and Asterisk with TE110P hybrid setup
successfully
and it is possible to route DID to a PRI card in D500 if it is set up as
EXT
card, and extension "number" of PRI card is defined for example as
2XX.
This
gives you opportunity to have extensions 200 - 299 routed to PRI
interface
in Panasonic D500 and after that setting up DID routing is easy.
On the other hand, in that configuration we have an echo problem with
the
calls that entered Panasonic through the first PRI card connected to
Telco,
and that got picked up by any EXT of Panasonic, and then got transferred
to
the Asterisk extensions which are SIP phones (over that second PRI
interface
in D500 connected to a TE110P).
Also we have a problem with SpanDSP as a FAX in that configuration (call
to
a FAX DID on Asterisk ends after a 3-4 seconds).
Both this issues don't happen when the Asterisk is connected directly to
a
Telco.
Regards,
Nenad
> On Mon, 18 Jul 2005, Guy C. Guckenberger wrote:
>
>> Anyone have any luck with connecting Asterisk to the Panasonic
KX-TD500.>> I have Asterisk connected via crossover to the TE110P. We are able to
>> make internal calls into the Asterisk Box but the PBX vendor (I know
>> nothing about the KX-TD500) tells us it is not possible route DID
over>> the trunk. I find this hard to believe. Anyone have any luck with
this?>
> It depends on what T1/E1 card you have in the Panasonic, I think. It
> most certainly depends on what you are trying to accomplish.
>
> On the 500 it _is_ possible to set up a dialplan that will route some
> extensions out over a PRI link. That is one of the qualitative
differences> between the KX-TD1232/KX-TD816 and the KX-TD500.
>
> So, what kind of trunk card do you have in the Panasonic and what do
you> expect it to do?
>
> Peter
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
> > Hi > > I have a connection with Panasonic TDA200. > > 1. For echo,,, echocancel=yes, must be before the channel definition of > the > PRI.I'm very glad if that worked for you, but in case of D500 (connected as described in previus messages in this thread), it seems that there is no solution for echo problem. I was even in contact with Digium support and after testing, we came to conclusion that calls that are entering Panasonic over a PRI and got picked up by any Panasonic Extension and then transfered to Asterisk connected over second PRI, are seen by Asterisk as analogue calls (no matter they entered Panasonic over PRI and left Panasonic over second PRI and got to Asterisk over the PRI :) ). This type of calls, and by my now 6 months expirience with asterisk-panasonic D500 hybrid, ONLY this type of calls, always have a noticable echo (tested with all different TX and RX leves, all kind of echo-cancellation compiled in zaptel drivers, all kind of echocancel, echocancelwhenbridged and echotraining settings). So far no solution for that (except I'm trying to get external hardware 1xE1/PRI echo-canceller, to put it in between asterisk and D 500, to see will it solve problem :( ). Regards, Nenad
Alex, Yes we are able to call back and forth and the Panasonic is actually passing DIDs to * too. The trick was that the ROM chips in the Panasonic had to be upgraded. Panasonic provided this free of charge. We did not have the Echo problem. Faxing via * though the panasonic seems to work well to. The only problem Im having now is that about every 24 hours one of the channels on the trunk gets stuck with part of an ext number. Ie the ext on the asterisk side are 6xxx and if I type zap show channels the 23 channel may have a 6 and no more calls can get delivered to that channel. The only way I can fix this is to reboot the server. Guy -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Alex Ternero Sent: Tuesday, August 09, 2005 3:16 PM To: 'Asterisk Users Mailing List - Non-Commercial Discussion' Subject: RE: [Asterisk-Users] Re: Panasonic KX-TD500 Hi I have a connection with Panasonic TDA200. 1. For echo,,, echocancel=yes, must be before the channel definition of the PRI. One question>From Panasonic extensions can call to SIP Phones????Alex -----Mensaje original----- De: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com]En nombre de Guy C. Guckenberger Enviado el: martes, 19 de julio de 2005 18:45 Para: Asterisk Users Mailing List - Non-Commercial Discussion Asunto: RE: [Asterisk-Users] Re: Panasonic KX-TD500 This is good info. Has anyone else had this success? Can anyone address the ECHO issue? Thanks -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Nenad Radosavljevic Sent: Tuesday, July 19, 2005 1:58 AM To: asterisk-users@lists.digium.com Subject: [Asterisk-Users] Re: Panasonic KX-TD500 We have Panasonic D500 and Asterisk with TE110P hybrid setup successfully and it is possible to route DID to a PRI card in D500 if it is set up as EXT card, and extension "number" of PRI card is defined for example as 2XX. This gives you opportunity to have extensions 200 - 299 routed to PRI interface in Panasonic D500 and after that setting up DID routing is easy. On the other hand, in that configuration we have an echo problem with the calls that entered Panasonic through the first PRI card connected to Telco, and that got picked up by any EXT of Panasonic, and then got transferred to the Asterisk extensions which are SIP phones (over that second PRI interface in D500 connected to a TE110P). Also we have a problem with SpanDSP as a FAX in that configuration (call to a FAX DID on Asterisk ends after a 3-4 seconds). Both this issues don't happen when the Asterisk is connected directly to a Telco. Regards, Nenad> On Mon, 18 Jul 2005, Guy C. Guckenberger wrote: > >> Anyone have any luck with connecting Asterisk to the PanasonicKX-TD500.>> I have Asterisk connected via crossover to the TE110P. We are able to>> make internal calls into the Asterisk Box but the PBX vendor (I know >> nothing about the KX-TD500) tells us it is not possible route DIDover>> the trunk. I find this hard to believe. Anyone have any luck withthis?> > It depends on what T1/E1 card you have in the Panasonic, I think. It > most certainly depends on what you are trying to accomplish. > > On the 500 it _is_ possible to set up a dialplan that will route some > extensions out over a PRI link. That is one of the qualitativedifferences> between the KX-TD1232/KX-TD816 and the KX-TD500. > > So, what kind of trunk card do you have in the Panasonic and what doyou> expect it to do? > > Peter_______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users