Hi, I've got attended (superivised) transfer working with a handful of SIP phones, connected via different ATA's to an Asterisk CVS-D2005.05.28.22.00.00-07/12/05-20:47:08. pingu*CLI> show features Feature Default Current ------- ------- ------- Pickup *8 *8 Blind Transfer # ** Attended Transfer # One Touch Monitor Disconnect Call The 'standard' transfer, as I would call it, works fine: A calls B, B pushes # and dials C's number, C answers, B talks to C, B hangs up and A is connected to C. Also this version works: A calls B, B pushes # and dials C's number, C answers, B talks to C, C doesn't wanna take the call and hangs up: B is connected to A again. 1st problem: A calls B, B pushes # and dials C's number, but C doesn't answer. How can B get back to A? 2nd problem: A calls B, B pushes # and dials C's number, but C doesn't answer and the timeout of the dial command occurs: This causes A and B to get disconnected! I think this is a bug. 3rd problem: A calls B, B pushes # and dials C's number, C's voicemail answers, but if B hangs up, A also gets disconnected. I've read a few mails and articles dealing with this issue but found no solution. Some suggested to hang up and use *8 to pickup the call again, but this didn't work for me (pickup doesn't work for me at all - does it has to do with groups? I never tried that). Anyone got a solution for this tranfer issues? Udo