Im using bristuff-0.2.0-RC8g with two HFC-PCI controllers.
Inbound calls work just fine, but when im dialing out asterisk shows:
-- Executing Macro("SIP/8010-20a1",
"dial_out|xxxxxxxxxxx") in new stack
-- Executing Answer("SIP/8010-20a1", "") in new stack
-- Executing SetCallerID("SIP/8010-20a1", "xxxxxxxxxx")
in new stack
-- Executing Dial("SIP/8010-20a1", "ZAP/g1/xxxxxxxxxx")
in new stack
-- Requested transfer capability: 0x00 - SPEECH
-- Called g1/xxxxxxxxxx
-- Zap/1-1 is ringing
The operator then tells me "The number your calling is not used".
I've tried different numbers and different prefixes.
Outdialing works fine with my old chan_capi config with a fritz pci card.
Frits van Tiel
