similar to: Zaphfc unable to dial out

Hi Folks, I've Asterisk Bristuffed up and running behind an Auerswald Commander Basic ISDN PBX on the internal ISDN Bus (BRI/PTMP). The HFC Card works marvelleous for outgoing calls (as the parallely installed avm fritzcard with chan_capi does), but when I'm trying to call in, I get a short ring signal and then the connection is terminated. This does not happen with chan_capi and

I have an X100P clone hocked up to an analog line of my PRI. I can use it to dial out. but when I call the extension it answers and says "GOODBY" I have a Livevoip DID which successfuly rings to ext 202 I am using asterisk@home and through the AMP inface the line should ring to ext 202 Below are Asterisk Messages, Extensions.conf and Extensions_additional.conf Extensions.conf

Hi, All I just want to be able to detect the fax signail while doing an outbout call taking advance of the out_dialout feature of asterisk. So for to have a clear image on how i am doing it. I have my .call that I move the /var/spool/asterisk/ouotgoing like: (numbers were changed to preserve privacy) Channel: Local/99999999 at dial_out/n CallerID: Fax Test <99999999> MaxRetries: 0

Hi, I have the SuSe9.2 installed in a box with a QuadBri. I have followed all the instructions i have found and this is my best result... only one error compiling zaptel :( .. y have the kernel sources an already made the links to its drwxr-xr-x 8 root root 328 Jun 16 20:20 . drwxr-xr-x 12 root root 320 Jun 16 14:05 .. drwxr-xr-x 3 root root 136 Jun 16 20:17 asterisk drwxr-xr-x 22 root

I'm experimenting with asterisk. This is my environment: - Debian sarge (vanilla kernel 2.4.29) - Asterisk 1.0.7-BRIstuffed-0.2.0-RC8g - Two sip phones (One cisco 7905 and one soft-phones X-Lite) - Digi International Datafire Micro V (Europe) (rev 02) (zaphfc) After two days of work now I can call between the two sip phones and I can call from sip phones to outside numbers via ISDN card.

Hi all, Just thought I'd pass along some pointers when outdialing with Voicetronix's OpenLine4 card. I was having a tough time dialing out from *, it probably has something to do with chan_vpb.c not waiting to hear the dialtone before telling the card to dial. A quick fix was to insert a "," in the dialstring telling the card to pause before dialing. However when the

Hi Running slackware 9.1 with compiled kernel patched to 2.6.6 running ok. Having problems compiling zaphfc.c First thing was the can't find "irq_vectors.h", but "solved" by changing the #include "irq_vectors.h" to #include "mach-default/irq_vectors.h" in /usr/src/linux/include/asm/ directory. But I still have errors with "structure has no

How i can log to understand where is my problem Sometimes zaphfc hang my nt1 plus with that error zaphfc: empty HDLC frame received. zaphfc: dchan tx fifo total number of frames exceeded! zaphfc: dchan tx fifo total number of frames exceeded! zaphfc: dchan tx fifo total number of frames exceeded! zaphfc: dchan tx fifo total number of frames exceeded! zaphfc: dchan tx fifo total number of frames

Hi Guys I have been running a test server for a few days now with * 1.0.9 bristuff RC8n. I had a power failure and the test machine was not on the ups. When power was restored I found the following error: FATAL: Error inserting zaphfc (/lib/modules/2.6.11.4-20a-default/misc/zaphfc.ko): Unknown symbol in module, or unknown parameter (see dmesg) My dmesg output: zaphfc: unsupported

Hi, I solved the Problem: the context defined in zaptel.conf: context = zapincoming was not in extensions.conf, so nothing worked. ( I assumend this context is only necessary for calls from zaptel, not to it) This may be a bug: in the verbose log I found nothing like "[chan_zap] Could not initialize ..., due to ....", this had helped alot and had saved alot of hours (-;

I've got Zaphfc working running Asterisk v. 0.7.2 Then I have tried with Asterisk V. 1.0 and the latest from CVS - with no succes. Has anybody got zaphfc working with newer version than 0.7.2 ? NR -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040616/32481fca/attachment.htm

Hi, We've been using zaphfc single ISDN cards as cheap Zaptel timing sources for our Asterisk boxes for a long time, and in the asterisk 1.0.x series, had zero problems doing so. I now have some boxes with Zaptel 1.2.x (with a mixture of 1.0.x asterisk and 1.2.x asterisk), and this setup no-longer seems stable - By plugging or unplugging the ISDN cable, and sometimes just randomly the card

Hello, After searching the archives, I''ve found only two messages regarding this case, but there were no solution. I have a similar problem, so I try to ask here. I have twi HFC chipset ISDN cards in my pc: 0000:00:0d.0 Network controller: Cologne Chip Designs GmbH ISDN network controller [HFC-PCI] (rev 02) Subsystem: Cologne Chip Designs GmbH ISDN Board Flags: bus

Hello all, I've a little clue with zaphfc used to connect to a BRI linethat probably can be a configuration issue.... (really I hope so) Here, telcos (expecially mobile operators) use to substitute the dialtone with some vocal indication without answer the line. (Indications like "The customer is not reachable" or "wait because the customer is on the phone" ecc..) For

Hi, my zaphfc is flooding my syslog with two messages (even without asterisk running). Is this "normal"?: -------------------------------------------------- zaphfc: bchan rx fifo not enough bytes to receive! (z1=1360, z2=1353, wanted 8 got 7), probably a buffer overrun. zaphfc: dropped audio (z1=2712, z2=2695, wanted 8 got 17, dropped 9). With Asterisk running (asterisk -vvvvvgc)

Hi, I'm tring to setup a ISDN HFC card in NT mode, but I have a problem with ztcfg that always report a problem regarding FXS/FXO signaling. Is someone have ever seen this ? Loadind the zaphfc module seems ok.... -- insmod ./zaphfc.o modes=1 ------------ zaphfc: card configured at mem 0xc89eee00 fifo 0xc29e8000(0x29e8000) IRQ 19 HZ 100 zaphfc: Card 0 configured for NT mode zaphfc: 1 hfc-pci

I have an ISDN card, Billion ISDN PCI Card I tried to use the ZAPHFC, I patched the kernel, I did anything (also followed reccomandation on use on Suse Linux Professional 9.2 --my box is) using bristuff last version. In the end I succesfully compile zaphfc, but I am not able to use the card (a lot of problem running zapcfg, a loto of problem starting asterisk saying about wrong anything (from

-----Ursprungligt meddelande----- Fr?n: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] F?r Terry Wade Skickat: den 19 augusti 2005 07:08 Till: 'Asterisk Users Mailing List - Non-Commercial Discussion' ?mne: RE: [Asterisk-Users] Zaphfc.ko module error Hi Remco Thanks for the response. I am running Suse 9.3 kernel 2.6.11.4-20a-default. Will check

I would like to know how to install asterisk 1.0.9 with zaphfc working on a SuSE 9.2. I tried this: - The rpms with SuSE 9.2 are asterisk 1.0.6 - bristuff works, except for zaphfc, which doesn't compile. - The official asterisk download file doesn't contain isdn bri support Any ideas? Lars Dybdahl.

Hi, I'm banging my head on compiling bristuff modules for Suse 10.0 with kernel : Linux laps1 2.6.13-15.7-smp #1 SMP Tue Nov 29 14:32:29 UTC 2005 x86_64 x86_64 x86_64 GNU/Linux and Asterisk 1.2.1-BRIstuffed-0.3.0-PRE-1f . I get this : laps1:~/Voipy/1.2.1/bristuff-0.3.0-PRE-1f/zaphfc # make load make -C /usr/src/linux-2.6 SUBDIRS=/root/Voipy/1.2.1/bristuff-0.3.0-PRE-1f/zaphfc