I have looked at the wiki and the mailing list. But I need to find how do we
setup the external IP address and the rtp ports for the Polycom IP-500 and
IP-600. There web interface has a nat setting but can't find instructions
on how to set this up. I would like to set this up via there ftp file setup
instead of via there web setting.
Also There QoS settings are set to 5 and 2 but there it does not say if you
change it to 7 or to a lower number which one gives you better priority.
Main problem I am having is that the polycoms work great as long as there on the
same LAN. once they go through a Nat router even if all the ports are open we
get one way audio or no audio. The asterisk servers are on a real world IP
address and the Phones are behind a Nat firewall called m0n0wall. We have all
ports open going out to where the asterisk box is setup.
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20050609/08feeb39/attachment.htm
