asterisk users - May 2005 - rxfax application - doesn't work properly

hi,
I am on fax-to-email system, basically taken from
http://www.voip-info.org/wiki-Asterisk+Fax+to+email

well, it seems that asterisk causes some problems so that it is impossible
to send any fax.
I.e. when I try to send a fax to asterisk (rxfax application):
normalFax--->FXS(TDM400P)--->Asterisk(RxFax) it breakes up the trasmission
at the beginning of sending page.
The code given by panasonic fax is 41 - however I have no idea what it means
because it is a service code for authorized services.

when I tried to send fax via asterisk:
normalFax--->FXS(TDM400P)---->ISDN(HFC-S)---normalFax
it didn't work out, error code was 43 !?

I thought that this can be a problem of TDM400P so I tried something else:
normalFax--->ISDN(NT)---->ISDN(NT)--->ISDN(HFC-S)---->Asterisk(RxFax)
- the same problem with code 41.


Can anybody give me any hint, where shoud I look for the solution ?
I suppose that there is a solution.

Asterisk 1.0.4-BRIstuffed-0.2.0-RC3a
- so old because of that was the only debian package I could find that
supported bristuff and tx/rxfax...

I know, I have to build up the newest package with all necessary tools,
however - is my problem connected to a version of asterisk/bristuff or maybe
something else ?

Regards,
Marcin

Try with Bri stuff 0.2.0 > 8. There where a lot of errors in the older
ones and you need very very precise clocking for what you are trying
to do.

On 5/31/05, Marcin Kuczera <asterisk-users@poczta.rybnik.pl>
wrote:
> hi,
> I am on fax-to-email system, basically taken from
> http://www.voip-info.org/wiki-Asterisk+Fax+to+email
> 
> well, it seems that asterisk causes some problems so that it is impossible
> to send any fax.
> I.e. when I try to send a fax to asterisk (rxfax application):
> normalFax--->FXS(TDM400P)--->Asterisk(RxFax) it breakes up the
trasmission
> at the beginning of sending page.
> The code given by panasonic fax is 41 - however I have no idea what it
means
> because it is a service code for authorized services.
> 
> when I tried to send fax via asterisk:
> normalFax--->FXS(TDM400P)---->ISDN(HFC-S)---normalFax
> it didn't work out, error code was 43 !?
> 
> I thought that this can be a problem of TDM400P so I tried something else:
>
normalFax--->ISDN(NT)---->ISDN(NT)--->ISDN(HFC-S)---->Asterisk(RxFax)
> - the same problem with code 41.
> 
> 
> Can anybody give me any hint, where shoud I look for the solution ?
> I suppose that there is a solution.
> 
> Asterisk 1.0.4-BRIstuffed-0.2.0-RC3a
> - so old because of that was the only debian package I could find that
> supported bristuff and tx/rxfax...
> 
> I know, I have to build up the newest package with all necessary tools,
> however - is my problem connected to a version of asterisk/bristuff or
maybe
> something else ?
> 
> Regards,
> Marcin
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users@lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
> 

-- 
Michal Bielicki
http://www.aefirion.org/
http://www.asterisk.com.pl/