You can build it alone.
Then try to 'modprobe zaptel' and then 'modprobe ztdummy'
If you do this without errors it must work.
For more info read the wiki.
RG,
Gentian
----- Original Message -----
From: Mohamed A. Gombolaty
To: asterisk-users@lists.digium.com
Sent: Tuesday, May 31, 2005 12:22 PM
Subject: [Asterisk-Users] Ztdummy usage
Dear All,
I have installed Asterisk everything is OK until I tried to configure meeting
room, configuration was simple enough when I try I get a message that it's
not a valid meeting room, Now I don't have a Zaptel device on my machine,
so I found that you will have to use ztdummy to make a dummy zaptel device on
your machine and this is because of timing issues.
My question is ztdummy can only be done when making asterisk or is ther a way
to do it after post installation?
I am using by the way freebsd 5.3, built Asterisk from the ports successfully.
--
Thx
MAG
------------------------------------------------------------------------------
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20050531/8c1586f7/attachment.htm