asterisk users - May 2005 - Cisco ATA 186 with *70

Has anyone come across the Cisco ata 186 not passing *70? When I press *70, the
ata just goes back to a dial tone. The strange thing is, its only *70 and not
the reset of the 70's. *71, *72, etc all go through fine. I've tried
removing the the dialplan all together from the ata to try and let it pass, but
no go??? If I setup an IP phone to its extension, *70 goes through fine, so i
know its definatly the ata. Anyone know a way around this?
 
Chris
 

-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20050509/d148bf00/attachment.htm

I seem to be having the exact same issue with the cisco ata 188.
Not sure, but looking at the cisco manuals there are alot of options in
hex format one can add, though 0xffffffff should cover all.


On Mon, 9 May 2005, Christopher Kenna wrote:
> Has anyone come across the Cisco ata 186 not passing *70? When I press
> *70, the ata just goes back to a dial tone. The strange thing is, its
> only *70 and not the reset of the 70's. *71, *72, etc all go through
> fine. I've tried removing the the dialplan all together from the ata to
> try and let it pass, but no go??? If I setup an IP phone to its
> extension, *70 goes through fine, so i know its definatly the ata.
> Anyone know a way around this?
>
> Chris
>
>