asterisk users - Mar 2005 - IP PHONE with chip PA1688 and IAX2 Authentication

Dear All,
I bought one IP PHONE from Integrated Networks which was showed to wiki too:
http://www.voip-info.org/tiki-index.php?page=Intergrated-Networks
I have problems with the Asterisk authentication. It does't want to LOG IN 
to Asterisk; it always says "LOG ON FAILED". I'm using the IAX2
protocol and
all paramters seems to be correct.
Does somebody use the same IP PHONE with Asterisk and IAX2? Can someone tell 
me the right configuration for it?

My actual configuration is:

locale ip: 192.168.0.75
subnet mask: 255.255.255.0
router ip: 192.168.0.1
dns: 192.168.0.1

protocol: iax2
service type: common
use service marked
service address: 192.168.0.1:4569
nat trasversal: disabled
phone number: 103
account: ipphone
pin: test
register port: 4569
signal port:1701
control port:1721
rtp port:1721
local type: auto

the phone firmware is V.1.38.009

My Asterisk extension is:

[ipphone]
type=friend
username=ipphone
secret=test
auth=md5
host=dynamic
context=fullaccess
mailbox=103
callerid="ipphone"<103>

Thanks for any help
Regards,

Hi Androtech,



Androtech wrote:
> Dear All,
> I bought one IP PHONE from Integrated Networks which was showed to wiki 
> too:
> http://www.voip-info.org/tiki-index.php?page=Intergrated-Networks
> I have problems with the Asterisk authentication. It does't want to LOG
> IN to Asterisk; it always says "LOG ON FAILED". I'm using the
IAX2
> protocol and all paramters seems to be correct.
> Does somebody use the same IP PHONE with Asterisk and IAX2? Can someone 
> tell me the right configuration for it?
> 
Check the wiki and search for atcom phones.

maybe the info there will help you out.

Matt

On 2005/03/23, at 5:38, Androtech wrote:
> Dear All,
> I bought one IP PHONE from Integrated Networks which was showed to 
> wiki too:
> http://www.voip-info.org/tiki-index.php?page=Intergrated-Networks
> I have problems with the Asterisk authentication. It does't want to 
> LOG IN to Asterisk; it always says "LOG ON FAILED". I'm using
the IAX2
> protocol and all paramters seems to be correct.
> Does somebody use the same IP PHONE with Asterisk and IAX2? Can 
> someone tell me the right configuration for it?
>
> My actual configuration is:
>
> locale ip: 192.168.0.75
> subnet mask: 255.255.255.0
> router ip: 192.168.0.1
> dns: 192.168.0.1
>
> protocol: iax2
> service type: common
> use service marked
> service address: 192.168.0.1:4569
> nat trasversal: disabled
> phone number: 103
> account: ipphone
> pin: test
> register port: 4569
> signal port:1701
> control port:1721
> rtp port:1721
> local type: auto
>
> the phone firmware is V.1.38.009
>
> My Asterisk extension is:
>
> [ipphone]
> type=friend
> username=ipphone
> secret=test
> auth=md5
> host=dynamic
> context=fullaccess
> mailbox=103
> callerid="ipphone"<103>
>
> Thanks for any help
> Regards,
>
>
>
>
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users@lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
I have this phone which uses a 168S chip. Although it says it supports 
IAX2, it seems that firmware 1.38
only supporta some sort of proprietary VOIP provider protocol, forgot 
which one. You'll have to upgrade the
firmware to 1.42 to get real IAX2 support. Also when upgrading the 
firmware set the debug option to
"no check" (if your config menu has this option), otherwise it will
not
upgrade. (seems to be a security precaution)

Hope this helps

Daniel

remove auth=md5 from your iax.conf and try again.




On Tue, 22 Mar 2005 21:38:15 +0100, Androtech <androtech@gigliesi.it>
wrote:
> Dear All,
> I bought one IP PHONE from Integrated Networks which was showed to wiki
too:
> http://www.voip-info.org/tiki-index.php?page=Intergrated-Networks
> I have problems with the Asterisk authentication. It does't want to LOG
IN
> to Asterisk; it always says "LOG ON FAILED". I'm using the
IAX2 protocol and
> all paramters seems to be correct.
> Does somebody use the same IP PHONE with Asterisk and IAX2? Can someone
tell
> me the right configuration for it?
> 
> My actual configuration is:
> 
> locale ip: 192.168.0.75
> subnet mask: 255.255.255.0
> router ip: 192.168.0.1
> dns: 192.168.0.1
> 
> protocol: iax2
> service type: common
> use service marked
> service address: 192.168.0.1:4569
> nat trasversal: disabled
> phone number: 103
> account: ipphone
> pin: test
> register port: 4569
> signal port:1701
> control port:1721
> rtp port:1721
> local type: auto
> 
> the phone firmware is V.1.38.009
> 
> My Asterisk extension is:
> 
> [ipphone]
> type=friend
> username=ipphone
> secret=test
> auth=md5
> host=dynamic
> context=fullaccess
> mailbox=103
> callerid="ipphone"<103>
> 
> Thanks for any help
> Regards,
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users@lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>