search for: pa1688

For those of you who may be interest.... IAX2 loads are now available for the standard builds... http://www.aredfox.com/edownloadsiax2.htm Just a word of caution... Remember to change the ports over to 4569 from whatever. And don't forget to grab the palmtool from http://www.aredfox.com/download/tools/PalmTool.zip My own testing of IAX2 with both a phone and an ATA is that IAX2 is

Dear All, I bought one IP PHONE from Integrated Networks which was showed to wiki too: http://www.voip-info.org/tiki-index.php?page=Intergrated-Networks I have problems with the Asterisk authentication. It does't want to LOG IN to Asterisk; it always says "LOG ON FAILED". I'm using the IAX2 protocol and all paramters seems to be correct. Does somebody use the same IP PHONE with

I'm just wondering if anyone knows the story with these... http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&rd=1&item=5721202362&ssPageName=STRK:MEWA:IT He claims they support IAX2 and SIP... but almost no history on the account selling them. I didn't see anything in the wiki about this company either.. Does anyone have any history with these phones? Thanks, Jared

I received a sample IP/Speakerphone from my friends in China today. Asterisk setup was fairly uncomplicated and I had it running as an extension on my server within a few minutes. Sounds quality of both the receiver and the speakerphone are fine (wife's opinion). Are there any tests I should run with this phone? Following are the specs: - Single line appearance - Alpha display, 2x16 chars -

Hi all, I have a VOIP phone with the PA1688 chip; my firmware is V1.42.028. This IP phone is registered in an Asterisk PBX and I've a problem when I dialing internal number. If I dial an internal number, like for example 102, the IP phone takes 35 seconds to send the number to Asterisk; here below the debug output 192.168.0.75: first 1...

I am trying to add a Polycom IP 3000 to our Asterisk system and am not getting anywhere. h323.conf [8908] type=friend host=192.168.104.25 secret=polycom context=crv-default callerid="Conference Room Polycom" extensions.conf exten => 8908,1,Dial(h323/polycom,20,Ttr) ; Polycom exten => 8908,2,Hangup I have tried setting the Asterisk system as both gatekeeper

Hi, I've got two pa1688 phones that I want to set up to communicate between branch offices without a gatekeeper. Both phones will be behind a firewall and I want to use port forwarding so the phones can communicate. I tested the phones behind a firewall on the same network segment and there were no problems at all usi...

I am about to buy AT-320EE phones for use together with asterisk. Has anyone used these phones ? Are there any known problems using them using Asterisk ?

Greetings, I'm having a job getting asterisk to register with a Huawei softX3000 softswitch via SIP. I keep getting 401 Unauthorized. Funny thing is I can successfully register SJPhone, a PA1688 IP Phone as well as a WiFi Phone against the switch without *any* problems. I think it's got to be something as simple as perhaps the register string which is currently <username><password>@<ip address> although I've tried a number of variations without success. Here'...

...lst trying to get this Tecom phone working with Asterisk, it seems to be unable to login. Using the 'sip debug' command from the CLI does not produce any output even though the debug of the phone shows it trying to login every second or so? The phone seems to be based on a "Centrality PA1688" processor. Is there any other way I can see why this phone fails to login? I notice in /var/log/asterisk/messages I see a few errors: Nov 21 16:45:21 WARNING[10116]: sip_xmit of 0x8374b14 (len 464) to 192.168.1.10 returned -1: Invalid argument Nov 21 16:45:22 WARNING[10116]: sip_xmit of 0x...

Who else makes Analog Telephone Adapters with IAX protocol besides Digium? I've seen Farfon is advertising their unit but I'm not sure if they shipped it or not. Why is so hard for others to support this protocol in their adapters? SIP is totally unsuitable for firewall traversal for security reason. I would like to get min. two port unit. Is it possible to use IAX protocol without

Hi, i need an recommandation for an ATA adapter to use with an anlog fax maschine. I would appreciate any hints. Regards!

Does anyone know of an ATA which has a modifieable (open source) firmware AND that supports faxing. Granted most of them don't do faxing well but that is more of a problem with the network side. Michael Blood -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050831/8c13db6b/attachment.htm

For those of you who wanted to know how the AG-468 (4xFXS) unit work (or it doesn't work), here is my personal experience. I had a problem from the start. The units ship from the factory set to static IP 192.168.1.200 even though it has a DHCP option in LAN Setting. So if you are on a different sub-net you have to figure out how to set your sub-net to access the unit; and those with less

Good Evening from Toronto. I have just installed Asterisk@HOME 2.6 and I am having difficulty with getting the YUXIN phones that I am using to work with Asterisk@HOME. I have flashed the units to 1.50 from the YUXIN Home Page. Does anyone have any history with these phones and Asterisk? Does anyone have the proper settings to get them to work with Asterisk? Am I using the proper firmware

Hi, I am looking for a budget IP phone that can use preferably iLBC or GSM codecs.. Suggestions?

Is there such a thing? Or is the Digium IAXy device the closest one can come? Additionally, any idea how to get the message waiting light to work through Digium IAXy device? Thanks, Joe

Hi all, I'm testing the re-invite with an * box and two phones (ywh500 ewith pa1688 chipset) but it doesn't wotk. The phones support the re-invite, and i use this row to dial (without Ttr) exten => s,22,Dial(${tjext}) and put canreinvite = yes in my sip.conf. Anyone can help me pls ? Thanks -------------- next part -------------- An HTML attachment was scrubbed... U...

I want some cheap ip-phones with auto-answer, to work as paging system at dinnertime. Options, please. Leif

Hi All, I can get Grandstream 100 SIP phones for EUR 75. I'm not sure about the pricing for these in Europe, so I'd like to hear from people here whether that is a reasonable price for them? TIA & BRgds -- Francesco Peeters ---- GPG Key = AA69 E7C6 1D8A F148 160C D5C4 9943 6E38 D5E3 7704 If your program doesn't recognize my signature, please visit