asterisk users - Mar 2005 - Kernel 2.4 or 2.6 for the latest asterisk ? ?

Thanks for that, I am however slightly concerned that due to the fast moving
asterisk project (with new versions coming out regularly) that digium may
start phasing out support for 2.4 kernel, I would like to settle on an OS
for my customers and don't want to have to readdress the situation in one
year because the 2.4 kernel is no longer the supported /stable version. Does
anybody believe this likely to happen??

Thanks

-----Original Message-----
From: Ariel Batista [mailto:arielb27@hotmail.com] 
Sent: 15 March 2005 15:00
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: RE: [Asterisk-Users] Kernel 2.4 or 2.6 for the latest asterisk ??

This question really has no one reply.  The different Linux builds all have
there reasons.  If your used to Fedora Core 1 then that is what you should
use. I use CentOS which is a clone of RHEL 3.  They have just released there
Version 4 which is based on RHEL 4.  It works and since I am used to the way
RH does there settings I like it.  But it's really up to you. Fedora is good
and works. I just don't use it do to it's mainly for RH to develop there
newer system from it.  

But I know that many use without problem Debian, Fedora, Slackware, Gentoo
and many more. There is even a group that is working with FreeBSD.  

-----Original Message-----
From: asterisk-users-bounces@lists.digium.com
[mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Brett, Gary
Sent: Tuesday, March 15, 2005 5:47 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: [Asterisk-Users] Kernel 2.4 or 2.6 for the latest asterisk ??

Hi there

Just a quick question. I have been playing around with asterisk CVS-1.0.02
on fedora core 1 (2.4 kernel) and I would like to have a look at asterisk v
1.0.6 but am still a little uncertain which linux kernel is best to run on
?, can I use Fedora Core 3 (is it the preferred kernel) or should I stick
with FC1

Ps - the only additional hardware in the box will be a digium single port E1

Any advice would be greatly appreciated

Gary
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

Hello,
i am running suse linux enterprise edition of kernel version 
2.6.5-7.97-smp, i have latest stable asterisk zaptel asterisk stuff
compile fines i have TDM400P card with 1FXS and 3FXO modules, every
time i probe with modprobe  and issue ztcfg -vv commandit shows the
following errors:
also issue modprobe wcfxs but no luck
asterisk2:/lib # modprobe zaptel
asterisk2:/lib # modprobe wct4xxp
asterisk2:/lib # ztcfg -vv

Zaptel Configuration
=====================

Channel map:

Channel 01: FXO Kewlstart (Default) (Slaves: 01)
Channel 02: FXS Kewlstart (Default) (Slaves: 02)
Channel 03: FXS Kewlstart (Default) (Slaves: 03)
Channel 04: FXS Kewlstart (Default) (Slaves: 04)

4 channels configured.

ZT_CHANCONFIG failed on channel 1: No such device or address (6)
i am also sets udev configuration files udev.rules and
permissions.udev  as describe on wiki am i doing something wrong.
please i have want some quick tips suggestions guidelines.

zaptel.conf:
fxoks=1
fxsks=2-4
loadzone = us
defaultzone=us
Thanks in advance please helping me out.