asterisk users - Mar 2005 - "No compatible codecs!" -- worked with 1.0.0, not 1.0.6 or CVS.

Okay, I'm terribly confused.  If I build and run Asterisk with the 1.0.0 
sources that I downloaded from Digium, my Polycom 300 works just fine.  
If I build with either various CVS builds, or the 1.0.6 sources from 
Digium, I get "No compatible codecs!".

WTF?

I'm using -the exact same- config files for both; I've tried 
enabling/disabling ULAW, ALAW and G279 on the Soundpoint, to no avail.  
Plug 1.0.0 back in -- works like a champ.

To say that I'm confused would be understating things rather severely.

Thanks much,

Ken D'Ambrosio

Ken D'Ambrosio wrote:
> To say that I'm confused would be understating things rather severely.
To say that we can't help you without seeing your config files would 
also be an understatement. Unfortunately, we are not all-knowing nor 
telepathic, so just saying "it doesn't work" won't generate
much
response besides sympathy.

Ken D'Ambrosio wrote:
> Okay, I'm terribly confused.  If I build and run Asterisk with the
1.0.0
> sources that I downloaded from Digium, my Polycom 300 works just fine.  
> If I build with either various CVS builds, or the 1.0.6 sources from 
> Digium, I get "No compatible codecs!".
> 
> WTF?
> 
> I'm using -the exact same- config files for both; I've tried 
> enabling/disabling ULAW, ALAW and G279 on the Soundpoint, to no avail.  
> Plug 1.0.0 back in -- works like a champ.
> 
> To say that I'm confused would be understating things rather severely.
disallow=all and allow=ulaw in sip.conf.  Do NOT allow= anything else 
and do NOT use bandwidth
--Eric

Hi Eric!
> and do NOT use bandwidth
Why is that? I am curious...

Cheers, Philipp

Philipp von Klitzing wrote:
> Hi Eric!
> 
> 
>>and do NOT use bandwidth> 
> 
> Why is that? I am curious...
Because bandwidth= just enables specific codecs.  The specific codecs 
enabled depend on the bandwidth= setting.