similar to: "No compatible codecs!" -- worked with 1.0.0, not 1.0.6 or CVS.

Hi all, i'm trouble with codec setup on an asterisk machine 1.4.18 and some Thomson ST2030 as extensions. In the users.conf file for internal extension i have: disallow=all allow=g729 allow=alaw allow=ulaw Without any codec installed (i mean with original g729 of asterisk) all go fine, calling from an extension to one other: Peer User/ANR Call ID Seq (Tx/Rx) Format

HI ALL; I found in the following page: http://www.voip-info.org/wiki-Asterisk+G.729+Licensing 1-If I could record all IVR promts in G729 format 2-If I could record voicemail in g279 format with """format_g729.c""""" then I donot need any g729 license (I suppose all my clients have g729 ip phones) My question is, how

Hey, all. I quoted a customer about $100 for some cheap SIP phones. I was planning on using the BT-102's, but he called said they look like "Princess phones," and I have to admit that he has a point. Some of the other inexpensive phones look decent, but (for example) the SPA-841's wiki entry says the remote end gets a lot of static. Since it'll be being used from a noisy

Hey, all. Got an SNOM 820 in the other day to kick the tires. As with many phones, provisioning it was a bit of a PITA. The biggest problem, as far as I could tell, was that their firmware just doesn't seem that stable, and is sometimes hard to get to. - I managed to corrupt the firmware twice; fortunately, instead of bricking the phone, there's a fairly easy-to-use "rescue

Hi, all. I see that the Polycom SoundPoint IP 330 supports VLAN... but I don't quite see how that works. Do you point a non-VLAN'd segment at it (akin to when you uplink a VLAN_enabled switch), and have the phone implement the VLAN? Or...? *puzzled* Thanks much, -Ken

Hi, all. I've got a fax extension in my extensions.conf, but spandsp never sends my faxes there. Both applications -- txfax and rxfax -- are registered by Asterisk, so they compiled and installed correctly. I've got a Sangoma A104 card, and (as some people had suggested) have loaded ztdummy. Everything seems fine, except that it never gets recognized as a fax. I've even turned off

Hi, all. I'm thinking of provisioning my (non-PRI) T1 to be part data, part voice (currently, it's only voice). With the T100P, how do I get it to "do" data? Just load up the HDLC module, and it gets an IP address? Or...? I tried RTFM'ing, but there just doesn't seem to be much on it (leastwise, that's readily findable). Thanks much, Ken D'Ambrosio

Hi, all. Got my Uniden UIP200 today (ordered from thetwistergroup.com), and was very excited to set it up... until I came to the realization that there were no docs with it whatsoever. There was, however, a sheet of paper with the stock warnings (don't use the phone in the tub, etc.), AND a URL -- for documentation. Score! Well, no. The URL it gave me, bcs.uniden.com, does indeed have

Hi, all. I just upgraded my sip.cfg for my Polycoms, and that damn warble on registration(? -- maybe it's on acquiring an IP?) has started again. I still have the old sip.cfg, but can't figure out which option it is. Any help? Thanks! -Ken D'Ambrosio -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.

Hey, all -- I'm looking to do some LDAP/Samba 3.x integration. I've found a bunch of docs, but a lot of them either are outdated, incomplete, or reference materials I haven't been able to find. Is there a one-stop-shopping document I should be looking at? Thanks! Ken D'Ambrosio

Hi, all. I want to have a button on my receptionist's 601 that, when pressed, will forward her current call to a given extension. Is there any way to do that? I've tried to RTFM, but I'm coming up empty. Thanks, -Ken D'Ambrosio

Allocating many small objects triggers numerous garbage collections as R grows its memory, seriously degrading performance. The specific use case is in creating a STRSXP of several 1,000,000's of elements of 60-100 characters each; a simplified illustration understating the effects (because there is initially little to garbage collect, in contrast to an R session with several packages

Can anyone shed some light on realtime caching? My desired behavior is that MWI works with realtime voicemail/sip/extensions AND updates to the database take place on the next call to the extensions. Right now I have rtcachefriends=yes, and MWI works, but updates to the database for a cached user seem to still require a reload. It is my understating that removing rtcachefriends will

Hi, I`d like to know the best way to manage codecs to let the CPU breath as much as possible. I understand transcoding is a big part of CPU usage on Asterisk, and I have the following situation: - A SIP provider that offers me G729 and ULAW (my choice, both as allowed) - Some of my calls are from G729 enabled phones to outside lines, and I`d like to send those calls using G279 to my

Hi, all. I'm trying to create a PDF queue... or, rather, I already have a homebrew solution I hacked together with an lprng filter, and it doesn't work too well. The solution at www.linuxgazette.com/issue72/bright.html, which uses the smb.conf and "print command" paramaters, appears to be much more elegant, but has one major shortfall: I don't see any way to get the

On 2015-10-20 05:33, Martin Kletzander wrote: > On Mon, Oct 19, 2015 at 03:57:39PM -0400, Ken D'Ambrosio wrote: >> Hi, all. Ubuntu host, attempting to get virsh working with >> VirtualBox... and failing. Here's what happens: >> >> root@foobox:~# virsh -c vbox:///session list >> error: failed to connect to the hypervisor >> error: internal error:

[Please excuse if this is a repeat; I initially tried to send it from a different account, and it's been held up for a couple of days awaiting moderation.] 1) What's the absolute minimum required (hardware-wise) in order to get one in-bound POTS line into Asterisk, and then have IP phones "inside?" [In other words, I obviously need a NIC -- but what would be the

Docs? Polycom has docs? Where would one find this fabled land of... err I mean Polycom does stating what ftp servers are supported? Doug. -----Original Message----- From: Ken D'Ambrosio [mailto:ken@jots.org] Sent: Tuesday, March 07, 2006 12:12 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Cc: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re:

I've got a Samba box (2.2.5a) as a member of a Samba domain. Both the PDC and client are running 2.4.18 with XFS and ACLs compiled in. Problem: on the client, I can -NOT- modify the ACLs for files from Windows. (Note that I can modify the stock Unix permissions, but not the extended users/permissions that ACL support offers.) If I try, they just vanish when I click "OK".

Hello, I wonder if anyone else has noticed this. I see a pair of calls to pipe() within the codec_g729a, and suddenly, I have a leaked file descriptor that remains until asterisk dies. Now, maybe no-one sees this, mainly because I have no g729 licenses on the machines where this happens. And conversely, I haven't yet studied servers that do have licenses. Why have codec_g729a.so loaded if