> -----Original Message-----
> From: Adam Fineberg [mailto:fineberg@levanta.com]
> Sent: Saturday, January 08, 2005 2:38 AM
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: Re: [Asterisk-Users] New 'n' priority
>
>
> Christopher L. Wade wrote:
>
> > 'n' and 's' as well as labels only work in CVS HEAD,
its
> > not in any of the 'stable' versions.
> >
> > -Chris
> >
> Well I'm using v1.0.3 and previously v1.0.2 and they certainly know
> about 's'. Haven't tried 'n' yet.
>
> Adam
>
I believe that you are referring to the 's' extension not the
's'
priority. Nearly any combination of characters can be used as an
extension and should be accessible as long as you call it from somewhere
in your dialplan.
The 's' & 'n' priorities were most definitely added after
the current
stable branch split from CVS-HEAD. To use them you must download the
source from CVS.
There is a fairly nice walk-through of the basic dialplan setup on the
wiki. Here are a few links to reference:
* http://www.voip-info.org/wiki-Asterisk+config+extensions.conf -
Dialplan Intro
* http://www.asteriskdocs.org/ - Asterisk Documentation project
* http://www.voip-info.org/ - Asterisk Wiki
Hope this helps, and good luck.
Robert Jackson
