The hardware we are planning to use is: Micronet SP5050 FXO Gateway http://www.micronet.com.tw/Products/VoIP/SP5050.asp Micronet SP5100 IP Phone http://www.micronet.com.tw/Products/VoIP/SP5100.asp We are hoping to use this hardware along with AsteriskPBX to replace our aging PBX system. What I want to acheive is: * Any incoming call from PSTN (via gateway) rings on the receptionists phone for 10 seconds, and then starts ringing on all phones. * Any user can just dial 1 to get the first avaliable outgoing line onto the PSTN. * All users can have voicemail, with email notification. * Calls can be transferred from one user to another. Is this all possible?? Is anyone else using this Micronet hardware? -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20030622/36cf1c5e/attachment.htm
On Mon, Jun 23, 2003 at 04:07:32PM +1200, Aaron Martin wrote:> The hardware we are planning to use is: > > Micronet SP5050 FXO Gateway > http://www.micronet.com.tw/Products/VoIP/SP5050.asp > > Micronet SP5100 IP Phone > http://www.micronet.com.tw/Products/VoIP/SP5100.asp >I can't help you with specific hardware. Asterisk speaks SIP, MCGP, H.323, IAX. Both the products above speak H.323, so you should be able to hook asterisk in the middle. I guess you'd configure asterisk to register with the gateway, and the phones to register with asterisk.> We are hoping to use this hardware along with AsteriskPBX to replace our aging > PBX system. > > What I want to acheive is: > * Any incoming call from PSTN (via gateway) rings on the receptionists phone > for 10 seconds, and then starts ringing on all phones. > * Any user can just dial 1 to get the first avaliable outgoing line onto the > PSTN. > * All users can have voicemail, with email notification. > * Calls can be transferred from one user to another. > > Is this all possible?? Is anyone else using this Micronet hardware?Asterisk can do all the above with other hardware. Micronet should work in theory. Perhaps someone else on the list has had experience with the micronet hardware. cheers, -- Woody
I am trying to test my dialogic card with asterisk , i have an E1 card in asterisk and one dialogic(d300) in another machine. Both are connected through a cross cable. Asterisk (digium E1) calls the dialogic(d300) card to its answer demo. The answer demo shows that the call is received but there is no voice. Can some one tell me the list of things to check or change. Like a-law,u-law for example. Thanks Regards Ayaz Gul Aga -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20030623/cbdabe14/attachment.htm
This could be related to my not hearing voice through the phone over a voice modem as well, which could answer both our problems if we have a routine of things to check off. thanks On Sun, 2003-06-22 at 22:47, ayaz wrote:> I am trying to test my dialogic card with asterisk , i have an E1 card > in asterisk and one dialogic(d300) in another machine. Both are > connected through a cross cable. > > Asterisk (digium E1) calls the dialogic(d300) card to its answer demo. > The answer demo shows that the call is received but there is no voice. > > Can some one tell me the list of things to check or change. > Like a-law,u-law for example. > > Thanks > > Regards > > Ayaz Gul Aga-- Jordan In a world without windows, who needs gates?
I am getting the calls through but there is no voice , help guys !!! ----- Original Message ----- From: "Jordan Peterson" <jordan@bonmail.com> To: <asterisk-users@lists.digium.com> Sent: Monday, June 23, 2003 11:14 AM Subject: Re: [Asterisk-Users] no voice on dialogic d300> This could be related to my not hearing voice through the phone over a > voice modem as well, which could answer both our problems if we have a > routine of things to check off. > > thanks > > On Sun, 2003-06-22 at 22:47, ayaz wrote: > > I am trying to test my dialogic card with asterisk , i have an E1 card > > in asterisk and one dialogic(d300) in another machine. Both are > > connected through a cross cable. > > > > Asterisk (digium E1) calls the dialogic(d300) card to its answer demo. > > The answer demo shows that the call is received but there is no voice. > > > > Can some one tell me the list of things to check or change. > > Like a-law,u-law for example. > > > > Thanks > > > > Regards > > > > Ayaz Gul Aga > -- > Jordan > > > In a world without windows, who needs gates? > > _______________________________________________ > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users > >