Hi there ! I searched the whole web to find some helping information about H323 Control Protocol, but there is no way to find that information. We compiled and installed asterisk_0.9.0 + pwlib 1.5.2 + openh323_1.12.2 + 'asterisk-oh323_1.5 channel driver + wrapper' and configured the dialplan for using our H323 Endpoints which are ip200 Innovaphones. Besides, we also use Gnomemeeting but don't care it's not the problem, I think ! The whole endpoints are registered on an ip400 Gatekeeper which routes every call to asterisk, and asterisk processes the Dialplan and sends the call back to the ip400 and to the correct Endpoint. With this configuration the Endpoints can dial each other above the Gatekeeper and Dial Plan. ;-) well pretty fine - the only damped thing is every call loses connection after 30 sec because of a a H323 control protocol error . this is the asterisk output while phoneing : ############################################################################### *CLI> -- Executing Dial("OH323/R1", "OH323/4020@10.88.250.250:1720|15") in new stack -- Called 4020@10.88.250.250:1720 -- OH323/L13468 answered OH323/R1>>>>>> *** [ip$x.x.x.x:2507/1] H.323 CONTROL PROTOCOL ERROR(Capability Exchange)>>>>>> *** [ip$x.x.x.x:2507/1] H.323 CONTROL PROTOCOL ERROR(Master-Slave Determination) *CLI> Sep 2 13:57:15 ERROR[294931]: chan_oh323.c:1212 oh323_hangup: OH323/L13468: Failed to hangup channel (timeout). -- Hungup 'OH323/L13468' == Spawn extension (buero, 3020, 1) exited non-zero on 'OH323/R1' -- Hungup 'OH323/R1' *CLI> ############################################################################### I hope you can help me and the whole asterisk community to solve this problem Hopefully, and waiting for response greets alex
a.sus@chello.at wrote:> Hi there ! > > I searched the whole web to find some helping information about H323 > Control Protocol, but there is no way to find that information. > We compiled and installed asterisk_0.9.0 + pwlib 1.5.2 + openh323_1.12.2 > + 'asterisk-oh323_1.5 channel driver + wrapper' and configured thePlease use current versions of Asterisk/OpenH323/asterisk-oh323. Michael.
Hi there ! I searched the whole web to find some helping information about H323 Control Protocol, but there is no way to find that information. We compiled and installed asterisk_0.9.0 + pwlib 1.5.2 + openh323_1.12.2 + 'asterisk-oh323_1.5 channel driver + wrapper' and configured the dialplan for using our H323 Endpoints which are ip200 Innovaphones. Besides, we also use Gnomemeeting but don't care it's not the problem, I think ! The whole endpoints are registered on an ip400 Gatekeeper which routes every call to asterisk, and asterisk processes the Dialplan and sends the call back to the ip400 and to the correct Endpoint. With this configuration the Endpoints can dial each other above the Gatekeeper and Dial Plan. ;-) well pretty fine - the only damped thing is every call loses connection after 30 sec because of a a H323 control protocol error . this is the asterisk output while phoneing : ############################################################################### *CLI> -- Executing Dial("OH323/R1", "OH323/4020@10.88.250.250:1720|15") in new stack -- Called 4020@10.88.250.250:1720 -- OH323/L13468 answered OH323/R1>>>>>> *** [ip$x.x.x.x:2507/1] H.323 CONTROL PROTOCOL ERROR(Capability Exchange)>>>>>> *** [ip$x.x.x.x:2507/1] H.323 CONTROL PROTOCOL ERROR(Master-Slave Determination) *CLI> Sep 2 13:57:15 ERROR[294931]: chan_oh323.c:1212 oh323_hangup: OH323/L13468: Failed to hangup channel (timeout). -- Hungup 'OH323/L13468' == Spawn extension (buero, 3020, 1) exited non-zero on 'OH323/R1' -- Hungup 'OH323/R1' *CLI> ############################################################################### I hope you can help me and the whole asterisk community to solve this problem Hopefully, and waiting for response greets alex
HI there ! Need help, I'm using asterisk 0.9.0,pwlib 1.5.2,openh323_1.12.2 and asterisk_oh323_1.5. All H323 Endpoint can dial each other for 30 sec, after that connection lost because of an H323 Control Protocol Error !!! this is the asterisk output while phoneing : ############################################################################### *CLI> -- Executing Dial("OH323/R1", "OH323/4020@10.88.250.250:1720|15") in new stack -- Called 4020@10.88.250.250:1720 -- OH323/L13468 answered OH323/R1>>>>>> *** [ip$x.x.x.x:2507/1] H.323 CONTROL PROTOCOL ERROR(Capability Exchange)>>>>>> *** [ip$x.x.x.x:2507/1] H.323 CONTROL PROTOCOL ERROR(Master-Slave Determination) *CLI> Sep 2 13:57:15 ERROR[294931]: chan_oh323.c:1212 oh323_hangup: OH323/L13468: Failed to hangup channel (timeout). -- Hungup 'OH323/L13468' == Spawn extension (buero, 3020, 1) exited non-zero on 'OH323/R1' -- Hungup 'OH323/R1' *CLI> ############################################################################### 1000 thx for help alex