I have an asterisk server running on Redhat 8.0 with a Digium TDM400P w/4 FXO modules (TDM04P) There are 2 lines going into the Digium card. One line is a Vonage digital line, and the other line is a Comcast voice line. I have a SIP Grandstream 100 phone connected to the Asterisk server. I also have IAX configured with FWD. The problem is that on occasionally, after talking for about 20 minutes or so, the call gets hung up and I get a fast paced busy signal. The caller gets dead air. So far this has happened on incoming calls to either the Comcast Line, the Vonage Line and it just happened while makine and 800 call on Freeworlddialup. The problem occurs on both lines for incoming calls and it just happened again today on an outgoing call after 15 minutes of talk. I have tried busydetect=no and yes and neither one make a difference. suggestions? /etc/asterisk/zapata.conf busydetect=yes busycount=10 -- Ruben Fagundo NPV Corporation Tel: 617-848-0890 x100 Fax: 617-249-1994
I have the same problem. My setup is: Suse 8.0 with 2 single FXO cards with 2 lines coming in and 1 ATA186 providing the connection to two analogue phones. What I get is an almost random hung up during calls (both incoming and dialed). Sometimes tha call can last for 30 minutes without any problems sometimes 1min. In all cases the phone switches to the busy tone and the caller hears nothing, The line does not hang-up though. I tried various tests trying to pin down the problem but I was unsuccessful so far. My latest theory was that this may happen when the ATA re-registers with Asterisk but as you dont have any ATAs it seems that my theory is wrong :-( Does anybody else have similar problems or knows a procedure to try in order to identify the source of the problem? Vassilis At 21:43 19/08/2004, you wrote:>I have an asterisk server running on Redhat 8.0 with a Digium TDM400P w/4 >FXO modules (TDM04P) > >There are 2 lines going into the Digium card. One line is a Vonage digital >line, and the other line is a Comcast voice line. I have a SIP Grandstream >100 phone connected to the Asterisk server. I also have IAX configured >with FWD. > >The problem is that on occasionally, after talking for about 20 minutes or >so, the call gets hung up and I get a fast paced busy signal. The caller >gets dead air. So far this has happened on incoming calls to either the >Comcast Line, the Vonage Line and it just happened while makine and 800 >call on Freeworlddialup. >The problem occurs on both lines for incoming calls and it just happened >again today on an outgoing call after 15 minutes of talk. > >I have tried busydetect=no and yes and neither one make a difference. >suggestions? > >/etc/asterisk/zapata.conf >busydetect=yes >busycount=10 > >-- >Ruben Fagundo >NPV Corporation > >Tel: 617-848-0890 x100 >Fax: 617-249-1994 > > > >_______________________________________________ >Asterisk-Users mailing list >Asterisk-Users@lists.digium.com >http://lists.digium.com/mailman/listinfo/asterisk-users >To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users
matt.riddell@sineapps.com
2004-Aug-20 06:21 UTC
[Asterisk-Users] False Hangups on Asterisk
Sorry for top-posting just carrying on the tradition... I had major problems with this last week on an IAX-FXO-Phone during a conference. I was disconnected every 30 minutes or so. I noticed some oddities with Lag and Jitter, and I can be sure, but I think it was when I maybe hadn't been talking for a few minutes. Matt Riddell On 20 Aug 2004 at 7:54, Vassilis Konstantinou wrote:> > I have the same problem. My setup is: > > Suse 8.0 with 2 single FXO cards with 2 lines coming in and 1 ATA186 > providing the connection to two analogue phones. > > What I get is an almost random hung up during calls (both incoming and > dialed). Sometimes tha call can last for 30 minutes without any > problems sometimes 1min. In all cases the phone switches to the busy > tone and the caller hears nothing, The line does not hang-up though. > > I tried various tests trying to pin down the problem but I was > unsuccessful so far. My latest theory was that this may happen when > the ATA re-registers with Asterisk but as you dont have any ATAs it > seems that my theory is wrong :-( > > Does anybody else have similar problems or knows a procedure to try in > order to identify the source of the problem? > > Vassilis > > > > > At 21:43 19/08/2004, you wrote: > >I have an asterisk server running on Redhat 8.0 with a Digium TDM400P > >w/4 FXO modules (TDM04P) > > > >There are 2 lines going into the Digium card. One line is a Vonage > >digital line, and the other line is a Comcast voice line. I have a > >SIP Grandstream 100 phone connected to the Asterisk server. I also > >have IAX configured with FWD. > > > >The problem is that on occasionally, after talking for about 20 > >minutes or so, the call gets hung up and I get a fast paced busy > >signal. The caller gets dead air. So far this has happened on > >incoming calls to either the Comcast Line, the Vonage Line and it > >just happened while makine and 800 call on Freeworlddialup. The > >problem occurs on both lines for incoming calls and it just happened > >again today on an outgoing call after 15 minutes of talk. > > > >I have tried busydetect=no and yes and neither one make a difference. > > suggestions? > > > >/etc/asterisk/zapata.conf > >busydetect=yes > >busycount=10 > > > >-- > >Ruben Fagundo > >NPV Corporation > > > >Tel: 617-848-0890 x100 > >Fax: 617-249-1994 > > > > > > > >_______________________________________________ > >Asterisk-Users mailing list > >Asterisk-Users@lists.digium.com > >http://lists.digium.com/mailman/listinfo/asterisk-users > >To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > _______________________________________________ > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users