Cisco PRI card in a 7200 running lastest IOS --> SIP --> * Problem #1: SIP authenticates it under "general" and gives it the context from [general] not from [cisco.ip.address.here]. Here's the relevant party of sip.conf: [209.104.XX.YY] context=dids type=friend host=209.104.XX.YY ; IP address of Cisco gateway dtmfmode=rfc2833 disallow=all allow=ulaw [general] ... context=weshouldnevergetthis ... When there is that context line in [general], the cisco gets that context. When there isn't, SIP DEBUG PEER buys us this: SIP Debugging Enabled for IP: 209.104.2.51:5060 Peer RTP is at port 209.104.2.51:0 Peer RTP is at port 209.104.2.51:0 Peer RTP is at port 209.104.2.51:0 Peer RTP is at port 209.104.2.51:0 Peer RTP is at port 209.104.2.51:0 Peer RTP is at port 209.104.2.51:0 Peer RTP is at port 209.104.2.51:0 Peer RTP is at port 209.104.2.51:0 Peer RTP is at port 209.104.2.51:0 [and so on] SIP SHOW PEER properly displays context=dids ... but yet... that's not the context that gets assigned to it. No context if [general] has none, context from general when it has one. Help? Ehud gavron@wetwork.net