Dominique Kull
2004-Jun-02 07:46 UTC
[Asterisk-Users] ZyXEL Prestige 2000W SIP hangup fails
Does anybody have any experience with the ZyXEL Prestige 2000W? I am having problems with the line tear down when I call another extension. If nobody picks up at the other end when I hangup the 2000W, the other extension continues to ring. Is there any way to hangup a SIP call if there is no more traffic? Asterisk seems to think that there is still a connection open. This is pretty annoying since it always leaves an empty VM. thanks Dominique
Hi, I've just tried it in my setup and it does not occur anymore. I did see this problem when I first got the phone, but since then I've updated everything, and it appears to have gone away :-) asterisk CVS-04/10/04-15:32:35 ZyXel P 2000 Software version WJ.00.0a bootrom version B.00.13 release date Apr 12 2004 Cheers Giles Scott ----- Original Message ----- From: "Dominique Kull" <atlantic@taridium.com> To: <asterisk-users@lists.digium.com> Sent: Wednesday, June 02, 2004 3:46 PM Subject: [Asterisk-Users] ZyXEL Prestige 2000W SIP hangup fails> Does anybody have any experience with the ZyXEL Prestige 2000W? I am > having problems with the line tear down when I call another extension. > If nobody picks up at the other end when I hangup the 2000W, the other > extension continues to ring. Is there any way to hangup a SIP call if > there is no more traffic? Asterisk seems to think that there is still a > connection open. This is pretty annoying since it always leaves an emptyVM.> > thanks > Dominique > > _______________________________________________ > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >
Lars Boegild Thomsen
2004-Jun-02 23:06 UTC
[Asterisk-Users] ZyXEL Prestige 2000W SIP hangup fails
I have noticed this one and I have also informed ZyXEL, but their response was vague to say the least. It is correct that the ZyXEL phone does not send a SIP Cancel when you disconnect an outgoing call that has not yet been picked up by the remote end. I have several times asked ZyXEL to put a formal bug report procedure in place with proper tracking but to no avail. Regards, Lars...> -----Original Message----- > From: asterisk-users-admin@lists.digium.com > [mailto:asterisk-users-admin@lists.digium.com]On Behalf Of Dominique > Kull > Sent: 02 June 2004 22:46 > To: asterisk-users@lists.digium.com > Subject: [Asterisk-Users] ZyXEL Prestige 2000W SIP hangup fails > > > Does anybody have any experience with the ZyXEL Prestige 2000W? I am > having problems with the line tear down when I call another extension. > If nobody picks up at the other end when I hangup the 2000W, the other > extension continues to ring. Is there any way to hangup a SIP call if > there is no more traffic? Asterisk seems to think that there is still a > connection open. This is pretty annoying since it always leaves > an empty VM. > > thanks > Dominique > > _______________________________________________ > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >
Pertti Pikkarainen
2004-Jun-02 23:26 UTC
[Asterisk-Users] ZyXEL Prestige 2000W SIP hangup fails
Prestige 2000W is the same BCM phone that was earlier referred as Wifi-600 in this list. http://www.bcm.com.tw/product/pdf/pdf1/Spec-WiFi600_2003_1103.pdf It has the same problem. If you enable WEP encryption ( 104 bit ), the voice becomes very choppy. Almost unusable. Without WEP it is fine. I wonder if anybody has better results with WEB enabled and with latest software releases ? -- Pertti Lars Boegild Thomsen wrote:>I have noticed this one and I have also informed ZyXEL, but their response >was vague to say the least. It is correct that the ZyXEL phone does not >send a SIP Cancel when you disconnect an outgoing call that has not yet been >picked up by the remote end. > >I have several times asked ZyXEL to put a formal bug report procedure in >place with proper tracking but to no avail. > >Regards, > > Lars... > > > >>-----Original Message----- >>From: asterisk-users-admin@lists.digium.com >>[mailto:asterisk-users-admin@lists.digium.com]On Behalf Of Dominique >>Kull >>Sent: 02 June 2004 22:46 >>To: asterisk-users@lists.digium.com >>Subject: [Asterisk-Users] ZyXEL Prestige 2000W SIP hangup fails >> >> >>Does anybody have any experience with the ZyXEL Prestige 2000W? I am >>having problems with the line tear down when I call another extension. >>If nobody picks up at the other end when I hangup the 2000W, the other >>extension continues to ring. Is there any way to hangup a SIP call if >>there is no more traffic? Asterisk seems to think that there is still a >>connection open. This is pretty annoying since it always leaves >>an empty VM. >> >>thanks >>Dominique >> >>_______________________________________________ >>Asterisk-Users mailing list >>Asterisk-Users@lists.digium.com >>http://lists.digium.com/mailman/listinfo/asterisk-users >>To UNSUBSCRIBE or update options visit: >> http://lists.digium.com/mailman/listinfo/asterisk-users >> >> >> > >_______________________________________________ >Asterisk-Users mailing list >Asterisk-Users@lists.digium.com >http://lists.digium.com/mailman/listinfo/asterisk-users >To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > >
Dominique Kull
2004-Jun-04 03:53 UTC
[Asterisk-Users] ZyXEL Prestige 2000W SIP hangup fails
Thanks for your replies. The hangup is still failing with the latest CVS head. It seems to be a firmware issue. I am running WJ.00.0a / B.00.13 / Apr 12 2004 - Is there any newer release of the firmware floating around? cheers Dominique PS: Another interesting effect(IMHO bug): I cannot access the web interface after some time unless I make a call first. The same applies for pinging the handset. It only will reply after call has been established. Might be a power save feature... :-) >> -----Urspr?ngliche Nachricht----- >> Von: asterisk-users-admin@lists.digium.com [mailto:asterisk-users-admin@lists.digium.com] Im Auftrag von Pertti Pikkarainen >> Gesendet: Donnerstag, 3. Juni 2004 08:26 >> An: asterisk-users@lists.digium.com >> Betreff: Re: [Asterisk-Users] ZyXEL Prestige 2000W SIP hangup fails >> >> >> Prestige 2000W is the same BCM phone that was earlier referred as Wifi-600 in this list. >> >> http://www.bcm.com.tw/product/pdf/pdf1/Spec-WiFi600_2003_1103.pdf >> >> It has the same problem. If you enable WEP encryption ( 104 bit ), the voice becomes very choppy. Almost unusable. Without WEP it is fine. >> >> I wonder if anybody has better results with WEB enabled and with latest software releases ? >> >> -- Pertti >> >> >> Lars Boegild Thomsen wrote: >> >> >>> I have noticed this one and I have also informed ZyXEL, but their response was vague to say the least. It is correct that the ZyXEL phone does not send a SIP Cancel when you disconnect an >> >> >> outgoing call >> >>> that has not yet been picked up by the remote end. >>> >>> I have several times asked ZyXEL to put a formal bug report >> >> >> procedure >> >>> in place with proper tracking but to no avail. >>> >>> Regards, >>> >>> Lars... >>> >>> >>> >>> >>>> -----Original Message----- >>>> From: asterisk-users-admin@lists.digium.com >>>> [mailto:asterisk-users-admin@lists.digium.com]On Behalf Of >> >> >> Dominique >> >>>> Kull >>>> Sent: 02 June 2004 22:46 >>>> To: asterisk-users@lists.digium.com >>>> Subject: [Asterisk-Users] ZyXEL Prestige 2000W SIP hangup fails >>>> >>>> >>>> Does anybody have any experience with the ZyXEL Prestige >> >> >> 2000W? I am >> >>>> having problems with the line tear down when I call another >> >> >> extension. >> >>>> If nobody picks up at the other end when I hangup the >> >> >> 2000W, the other >> >>>> extension continues to ring. Is there any way to hangup a >> >> >> SIP call if >> >>>> there is no more traffic? Asterisk seems to think that >> >> >> there is still >> >>>> a connection open. This is pretty annoying since it always >> >> >> leaves an >> >>>> empty VM. >>>> >>>> thanks >>>> Dominique
Dominique Kull
2004-Jun-09 08:13 UTC
[Asterisk-Users] ZyXEL Prestige 2000W SIP hangup fails
been playing around with the Pulver firmware WF.00.11/B.00.13/Apr 07 2004 and its not better in any way. Anbody made some progress with that issue? I guess we will have to wait for ZyXEL releasing a real production FW. cheers Dominique Dominique Kull wrote:> Thanks for your replies. The hangup is still failing with the latest CVS > head. It seems to be a firmware issue. I am running WJ.00.0a / B.00.13 / > Apr 12 2004 - Is there any newer release of the firmware floating around? > > cheers > Dominique > > PS: > Another interesting effect(IMHO bug): I cannot access the web interface > after some time unless I make a call first. The same applies for pinging > the handset. It only will reply after call has been established. Might > be a power save feature... :-) > > >> -----Urspr?ngliche Nachricht----- > >> Von: asterisk-users-admin@lists.digium.com > [mailto:asterisk-users-admin@lists.digium.com] Im Auftrag von Pertti > Pikkarainen > >> Gesendet: Donnerstag, 3. Juni 2004 08:26 > >> An: asterisk-users@lists.digium.com > >> Betreff: Re: [Asterisk-Users] ZyXEL Prestige 2000W SIP hangup fails > >> > >> > >> Prestige 2000W is the same BCM phone that was earlier referred as > Wifi-600 in this list. > >> > >> http://www.bcm.com.tw/product/pdf/pdf1/Spec-WiFi600_2003_1103.pdf > >> > >> It has the same problem. If you enable WEP encryption ( 104 bit ), > the voice becomes very choppy. Almost unusable. Without WEP it is fine. > >> > >> I wonder if anybody has better results with WEB enabled and with > latest software releases ? > >> > >> -- Pertti > >> > >> > >> Lars Boegild Thomsen wrote: > >> > >> > >>> I have noticed this one and I have also informed ZyXEL, but their > response was vague to say the least. It is correct that the ZyXEL phone > does not send a SIP Cancel when you disconnect an > >> > >> > >> outgoing call > >> > >>> that has not yet been picked up by the remote end. > >>> > >>> I have several times asked ZyXEL to put a formal bug report > >> > >> > >> procedure > >> > >>> in place with proper tracking but to no avail. > >>> > >>> Regards, > >>> > >>> Lars... > >>> > >>> > >>> > >>> > >>>> -----Original Message----- > >>>> From: asterisk-users-admin@lists.digium.com > >>>> [mailto:asterisk-users-admin@lists.digium.com]On Behalf Of > >> > >> > >> Dominique > >> > >>>> Kull > >>>> Sent: 02 June 2004 22:46 > >>>> To: asterisk-users@lists.digium.com > >>>> Subject: [Asterisk-Users] ZyXEL Prestige 2000W SIP hangup fails > >>>> > >>>> > >>>> Does anybody have any experience with the ZyXEL Prestige > >> > >> > >> 2000W? I am > >> > >>>> having problems with the line tear down when I call another > >> > >> > >> extension. > >> > >>>> If nobody picks up at the other end when I hangup the > >> > >> > >> 2000W, the other > >> > >>>> extension continues to ring. Is there any way to hangup a > >> > >> > >> SIP call if > >> > >>>> there is no more traffic? Asterisk seems to think that > >> > >> > >> there is still > >> > >>>> a connection open. This is pretty annoying since it always > >> > >> > >> leaves an > >> > >>>> empty VM. > >>>> > >>>> thanks > >>>> Dominique > > > _______________________________________________ > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users-- Dominique Kull The Old Lodge, London SW6 6EE UK t: +44 207 731 1562 e: dominique@kull.net