hi,
what happens if you change the rxgain and txgain to something lower than
1.0 ?
best regards
Wolfgang
Am Mo, den 31.05.2004 schrieb Stefano Finetti um 17:11:> Hello all,
>
> I've just finished to install chan_capi with 3 AVM Fritz PCI cards.
>
> It correctly loads the 3 drivers, and * starts without errors.
>
> immediately after * start, audio quality is really fine, but, after the
> first incoming call, all incoming audio is broken, trembling and
stuttering.
>
> From the other side, audio is still fine.
>
> Basically if i receive a call, who called me hears a fine audio while i
hear
> only stuttering noise.
>
> After the first call ends, the problem persist on each call until i restart
> *.
>
> If no call are received, all goes well with fine audio (i.e. without
> incoming calls answered, outgoing calls go just fine as expected.
>
> This is my capi.conf file (don't know if it's important in this
case, but
> better put than not :-) )
>
> ;
> ; CAPI config
> ;
> ;
> [general]
> nationalprefix=0
> internationalprefix=00
> rxgain=1.0
> txgain=1.0
>
> [interfaces]
>
> mode=immediate
> msn=0
> incomingmsn=*
> ;isdnmode=ptmp
> controller=1,2,3
> softdtmf=1
> overlap=1
> context=default
> echosquelch=1
> echocancel=yes
> echotail=64
> ;deflect=12345678
> callgroup=1
> devices=2,2,2
>
>
> Any suggestion? i've done a quick search on ml archives but didn't
find a
> similar problem...
>
> Thanks in advance
>
> --
> Stefano
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users@lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users