search for: echosquelch

...riencing a quality issue with my AVM Fritz!card PCI which is used with chan_capi. When somebody calls me on this line he hears a lot of noise and I hear "scratches" and "plops". It is very annoying. Below is is my /etc/asterisk/capi.conf I've tried to play with echotail and echosquelch but the quality is always terrible. Any suggestion is welcomed. Thanks, Ben </etc/asterisk/capi.conf> [general] rxgain=0.5 txgain=0.5 language=fr ;set default language ;ulaw=yes ;set this, if you live in u-law world instead of a-law [ISDN1] isdnmode=DID ;'MSN' (p...

...as outgoing msn exten => _070.,1,Dial(CAPI/@0703241432:${EXTEN}|30|r) in capi.conf I have: [general] nationalprefix=0 internationalprefix=00 rxgain=0.8 txgain=0.8 ;rxgain=0.0 ;txgain=0.0 [interfaces] msn=0703241432 incomingmsn=703241432 controller=1,2 softdtmf=1 accountcode= context=default ;echosquelch=1 echocancel=yes echotail=64 ;deflect=12345678 devices=2 msn=0703241434 incomingmsn=703241434 controller=1,2 softdtmf=1 accountcode= context=default ;echosquelch=1 echocancel=yes echotail=64 ;deflect=12345678 devices=2 Thanks, Patrick

...you live in u-law world instead of a-law [123456] ; Master number for line - i.e. number for line before MSNs were allocated ; and which still works and still accepts incoming calls. isdnmode=msn msn=01234123456 ;incomingmsn=* incomingmsn=123456 controller=1 softdtmf=1 accountcode= context=isdn-in echosquelch=1 echocancel=yes ;echotail=64 ;callgroup=1 ;deflect=12345678 devices=2 [123457] ;first MSN msn=01234123457 ;incomingmsn=* incomingmsn=123457 isdnmode=msn controller=1 softdtmf=1 accountcode= context=isdn-in echosquelch=1 echocancel=yes ;echotail=64 ;callgroup=1 ;deflect=12345678 devices=2 {repeat...

...ode at boot time: /sbin/divactrl load -SeparateConfig -c 1 -f ETSI -f1 ETSI -f2 ETSI -u2 -x2 -f3 ETSI -u3 -x3 And I think the capi.conf (using Armin's 0.6.1 version) looks OK: [DIVA2] ntmode=yes isdnmode=ptp incomingmsn=* controller=4 group=3 accountcode=diva context=international echosquelch=0 echocancel=no devices=1 But when I plug the phone into port 3 or 4 no led lights up, even with a Y plug and when dialing I get a busy. Before digging to deep, I am looking for some info on the feasability of that setup. Thanks,

...to use group=9 ;dialout group softdtmf=on ;enable/disable software dtmf detection, recommended for AVM cards relaxdtmf=on ;in addition to softdtmf, you can use relaxed dtmf detection accountcode= ;Asterisk accountcode to use in CDRs context=capi-in ;context for incoming calls echosquelch=1 ;_VERY_PRIMITIVE_ echo suppression echocancelold=yes;use facility selector 6 instead of correct 8 (necessary for older eicon drivers) echotail=64 ;echo cancel tail setting devices=2 ;number of concurrent calls on this controller ;(2 makes sense for single BRI, 30 for...

Has anyone a working /etc/asterisk/capi.conf example for Germany or Switzerland using the AVM C4 - ISDN Card. I try to connect asterisk to 3 wires BRI-ISDN (Swisscom). I appreciate your help and it would save me a lot of time, figuring it out by myself. regards, Claudio

After apt-get update && apt-get upgrade -y wget http://www.junghanns.net/asterisk/downloads/chan_capi.0.2.5c.tar.gz tar xfvz chan_capi.02.5c.tar.gz cd chan_capi-0.2.5c make && make install shutdown -r now asterisk seg faults upon calling in via ISDN. Any ideas are greatly appreciated. rgds pos

...he latest asterisk CVS code (from experimental), and hardware-wise an AVM Fritz!PCI Card, together with chan_capi 0.3.3. The problem is that any inbound/outbound calls result in echo on MY end (the asterisk end). I've played with the echo settings in capi.conf (mainly turning on echocancel and echosquelch, also tried playing with rxgain/txgain) to no avail. The only setting that has helped (somewhat) so far is enabling echosquelch. The echo disappears but a new problem arises. When the person on the other end starts to talk, the first bit is chopped off, and the last bit (before they go quiet) so it...

...nable to create channel of type 'CAPI' If the call is answered no problem occurs. Any suggestion? My configuration files are as follow: CAPI.CONF [general] nationalprefix=0 internationalprefix=00 rxgain=1 txgain=1 [interfaces] msn=460 incomingmsn=* controller=1 softdtmf=0 context=sisge echosquelch=1 isdnmode=ptp devices=2 msn=492 incomingmsn=* controller=1 softdtmf=0 context=sisge echosquelch=1 isdnmode=ptp devices=2 SIP.CONF [general] port = 5060 bindaddr = 0.0.0.0 context = sisge tos = lowdelay disallow = all allow = ulaw allow = alaw allow = gsm localnet = 192.168.1.0 localmask = 255.2...

...how to call them. My capi.conf is as follow, [general] nationalprefix=0 internationalprefix=00 rxgain=0.8 txgain=0.8 [interfaces] ;#########config de la primera interface CAPI##########333 msn=916733232 incomingmsn=* controller=1 softdtmf=1 accountcode= context=salientes-rdsi ;echosquelch=1 ;echocancel=yes ;echotail=64 ;callgroup=1 ;deflect=12345678 devices=2 ;###############Config de la segunda interface CAPI################33 msn=916733232 incomingmsn=* controller=2 softdtmf=1 accountcode= context=salientes-rdsi ;echosquelch=1 ;echocancel=yes ;echotail=64 ;callgr...

...- DSS1 - - - 2 /etc/asterisk/capi.conf (surely wrong, it refers to a previous conf as two separate lines) [general] nationalprefix=0 internationalprefix=0039 rxgain=0.8 txgain=0.8 [interfaces] msn=0227006XXX incomingmsn=* controller=1 softdtmf=1 context=incoming echosquelch=1 mode=immediate callgroup=1 devices=2 msn=0227007XXX incomingmsn=* controller=2 softdtmf=1 context=incoming echosquelch=1 mode=immediate callgroup=1 devices=2 Sorry if it's a basic question, but I can't find a detailed and complete example googling, and being the *box a production machin...

...asterisk 1.0.7 on debian sarge, and hardware-wise an AVM Fritz!PCI Card, together with chan_capi 0.3.5. The problem is that any inbound/outbound calls on analogue line result in echo on MY end (the asterisk end). I've played with the echo settings in capi.conf (mainly turning on echocancel and echosquelch, also tried playing with rxgain/txgain) to no avail. The only setting that has helped (somewhat) so far is enabling echosquelch. The echo disappears but a new problem arises. When the person on the other end starts to talk, the first bit is chopped off, and the last bit (before they go quiet) so it...

...B-Channel. When trying to place the second call I get: CAPI INFO 0x34a2: No circuit / channel available capi info shows: Contr1: 2 B channels total, 1 B channels free And capi.conf is: [ISDN1] msn=XXXXXXXX isdnmode=msn incomingmsn=* controller=1 group=1 softdtmf=on accountcode= context=remote echosquelch=1 echocancel=yes echotail=64 callgroup=1 devices=2 Any ideas? Greetings Torge

...er --- snap --- --- snip: capi.conf --- [general] nationalprefix=0 internationalprefix=00 rxgain=0.8 txgain=0.8 ;ulaw=yes [reventix] ;ntmode=yes isdnmode=msn incomingmsn=* controller=1 group=1 ;prefix=0 softdtmf=on relaxdtmf=on accountcode= context=reventix-incoming holdtype=local ;immediate=yes ;echosquelch=1 ;echocancel=yes echocancelold=yes ;echotail=64 ;bridge=yes ;callgroup=1 ;deflect=1234567 devices=2 --- snap --- Asterisk is located behind a EURACOM PBX. With chan_capi-cm 0.5.4 it worked good. What's going wrong in my configuration? Regards Bastian

...ason code of 0x3302. Here's the dial command : exten => s,1,Dial(CAPI/xxxxxx:b$OUTNUM$) and the capi.conf : [general] nationalprefix=0 internationalprefix=00 rxgain=0.8 txgain=0.8 [interfaces] msn=xxxxxx isdnmode=ptm incomingmsn=* controller=1 softdtmf=1 accountcode= context=from-pstn echosquelch=0 echocancel=yes echotail=64 devices=2 msn=xxxxxx isdnmode=ptm incomingmsn=* controller=2 softdtmf=1 accountcode= context=from-pstn echosquelch=0 echocancel=yes echotail=64 devices=2 Here's the CAPI trace of the outgoing call : Oct 6 20:04:17 VERBOSE[12454]: == found capi with omsn = xxxx...

...work. But weather inbound nor outbound is working :( My capi.conf: ; ; CAPI config ; ; [general] nationalprefix=0 internationalprefix=00 rxgain=0.8 txgain=0.8 [interfaces] mode=immediate isdnmode=ptp msn=8993 incomingmsn=* mode=immediate controller=1,2,3,4 softdtmf=1 ;accountcode= context=demo ;echosquelch=1 ;echocancel=yes ;echotail=64 callgroup=1 ;deflect=12345678 devices=8 from capi info at CLI> i get: Contr1: 2 B channels total, 2 B channels free. Contr2: 2 B channels total, 2 B channels free. Contr3: 2 B channels total, 2 B channels free. Contr4: 2 B channels total, 2 B channels free. I h...

...CAPI Hangingup == Everyone is busy/congested at this time ;/etc/asterisk/capi.conf ; chan_capi_cm with EICON 2BRI [general] nationalprefix=0 internationalprefix=00 rxgain=0.8 txgain=0.8 language=de [ISDN1] incomingmsn=83086920,83086921 isdnmode=msn group=1 controller=1 softdtmf=1 context=demo echosquelch=1 echocancel=yes echotail=64 callgroup=1 devices=2 ;/etc/asterisk/extensions.conf [demo] exten => 83086921,1,Dial(CAPI/ISDN1/zzzzzzzzzzz,20,tr) exten => 83086921,2,hangup If I forward the call to a SIP phone, or start a call to my mobile phone from a SIP phone, the phones ring. Thanks for...

...rly. I don't know whether these two effects belong together but both are rather disturbing. Here is our capi.conf: [general] nationalprefix=0 internationalprefix=00 rxgain=1 txgain=0.8 language=de [ISDN1] incomingmsn=8304498,8304499 isdnmode=msn group=1 controller=1 softdtmf=1 context=isdnin echosquelch=2 echocancel=yes echotail=64 callgroup=1 devices=2 I have changed the values for rxgain and txgain but that didn't change much. Thanks for any hint or advice, Stefan -- ******************************************** in-put GbR - Das Linux-Systemhaus Stefan-Michael Guenther Geschaeftsfuehrer...

...efault MSN (50) to a real one (91xxxxxx <-- faked here). My capi.conf: --- pbx:/etc/asterisk # cat capi.conf ; ; CAPI config ; ; [general] nationalprefix=0 internationalprefix=00 rxgain=0.8 txgain=0.8 [interfaces] msn=91xxxxxxx incomingmsn=* controller=1 softdtmf=1 accountcode= context=pstn ;echosquelch=1 ;echocancel=yes ;echotail=64 callgroup=1 deflect=91xxxxxxx devices=2 ;PointToPoint (55512-0) ;for outgoing calls use example 5551212 ;and in dialplan you can use callerid like ;exten => _0XXX.,1,StripMSD,1 ;exten => _XXX.,2,Dial,CAPI/55512${CALLERIDNUM}:bBYEXTENSION ;=====================...

...as Caller ID when dialing out. Configration: capi.conf --------- [general] nationalprefix=0 internationalprefix=00 rxgain=0.8 txgain=0.8 [interfaces] mode=immediate isdnmode=ptp msn=BAAAAAA incomingmsn=* controller=1 softdtmf=1 accountcode= context=main-menu usecallerid=yes callerid=asreceived ;echosquelch=1 ;echocancel=yes ;echotail=64 callgroup=1 pickupgroup=1 devices=2 mode=immediate isdnmode=ptp msn=BAAAAAA incomingmsn=* controller=2 softdtmf=1 accountcode= context=main-menu usecallerid=yes callerid=asreceived callgroup=1 pickupgroup=1 devices=2 mode=immediate isdnmode=ptp msn=BAAAAAA incomingm...