-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Good day eveyone, I'm hoping that someone can help me. Perhapps i'm overlooking the obvious, in truth, I hope that I am. I've scoured the mailing list and google, and haven't come up with much. I have a Digium T400P thats been connected to a channel bank for testing for some time now. all has been well. I've now just had installed a PRI from Allegiance Telecom. All 23 chanels are active, and they've told me that the 24th is the dchannel. switchtype is Lucent 5ess. Trunk is esf & b8zs [/etc/zaptel.conf] span=1,1,1,esf,b8zs bchan=1-23 dchan=24 loadzone=us defaultzone=us [/etc/asterisk/zapata.conf] [channels] switchtype=5ess context=incoming-pri signalling=pri_cpe echotraining=yes usecallerid=yes hidecallerid=no callwaiting=no echocancel=yes echocancelwhenbridged=no group=5 immediate=no callerid=asreceived musiconhold=default channel => 1-23 When I start Asterisk, I get this; - -------------------------------------------- May 30 21:54:07 NOTICE[1184048960]: chan_zap.c:5077 handle_init_event: Alarm cleared on channel 10 May 30 21:54:07 NOTICE[1184048960]: chan_zap.c:5077 handle_init_event: Alarm cleared on channel 11 May 30 21:54:07 NOTICE[1184048960]: chan_zap.c:5077 handle_init_event: Alarm cleared on channel 12 May 30 21:54:07 NOTICE[1184048960]: chan_zap.c:5077 handle_init_event: Alarm cleared on channel 13 May 30 21:54:07 NOTICE[1184048960]: chan_zap.c:5077 handle_init_event: Alarm cleared on channel 14 May 30 21:54:07 NOTICE[1184048960]: chan_zap.c:5077 handle_init_event: Alarm cleared on channel 15 May 30 21:54:07 NOTICE[1184048960]: chan_zap.c:5077 handle_init_event: Alarm cleared on channel 16 May 30 21:54:07 NOTICE[1184048960]: chan_zap.c:5077 handle_init_event: Alarm cleared on channel 17 May 30 21:54:07 NOTICE[1184048960]: chan_zap.c:5077 handle_init_event: Alarm cleared on channel 18 May 30 21:54:07 NOTICE[1184048960]: chan_zap.c:5077 handle_init_event: Alarm cleared on channel 19 May 30 21:54:07 NOTICE[1184048960]: chan_zap.c:5077 handle_init_event: Alarm cleared on channel 20 May 30 21:54:07 NOTICE[1184048960]: chan_zap.c:5077 handle_init_event: Alarm cleared on channel 21 May 30 21:54:07 NOTICE[1184048960]: chan_zap.c:5077 handle_init_event: Alarm cleared on channel 22 May 30 21:54:07 NOTICE[1184048960]: chan_zap.c:5077 handle_init_event: Alarm cleared on channel 23 May 30 21:54:07 WARNING[1175660480]: chan_zap.c:6174 zt_pri_error: PRI: Read on 130 failed: Unknown error 500 May 30 21:54:07 NOTICE[1175660480]: chan_zap.c:6905 pri_dchannel: PRI got event: 5 on span 1 - ---------------------------------------------- and Asterisk never brings up the d-channel. No calls are successful in or out. (cannot create channel of type zap) ANY ideas? MUCH Appreciated if anyone can be of assistance. Thanks, Jeff -----BEGIN PGP SIGNATURE----- Note: This signature can be verified at https://www.hushtools.com/verify Version: Hush 2.4 wkYEARECAAYFAkC7RJ0ACgkQjPSWd97xE05+yACfYBrNu3CmPGjcBn5L9NTKxQB41nQA nAhzYt8ngOHXjKE8nAK7SXwFFjUC =Tjpz -----END PGP SIGNATURE----- Concerned about your privacy? Follow this link to get FREE encrypted email: https://www.hushmail.com/?l=2 Free, ultra-private instant messaging with Hush Messenger https://www.hushmail.com/services.php?subloc=messenger&l=434 Promote security and make money with the Hushmail Affiliate Program: https://www.hushmail.com/about.php?subloc=affiliate&l=427
> I'm hoping that someone can help me. Perhapps i'm overlooking the > obvious, in truth, I hope that I am. I've scoured the mailing list and > google, and haven't come up with much. > > I have a Digium T400P thats been connected to a channel bank for testing > for some time now. all has been well. > > I've now just had installed a PRI from Allegiance Telecom. All 23 chanels > are active, and they've told me that the 24th is the dchannel. switchtype > is Lucent 5ess. Trunk is esf & b8zs > > [/etc/zaptel.conf] > span=1,1,1,esf,b8zs > bchan=1-23 > dchan=24 > loadzone=us > defaultzone=us >Note that I don't have any of the equipment you mentioned, so I may have little or no idea of what I'm talking about. I thought I'd post this anyway, as it might fall into the "overlooking the obvious" category. Have you tried different values in the "span" directive, in your "zaptel.conf"? You may want to try this setting: span=1,0,0,esf,b8zs That's all I can think of. -- _/ _/ _/_/_/_/ _/ _/ _/_/_/ _/ _/ _/_/_/ _/_/ _/ _/ _/ _/_/ _/ K e v i n W a l s h _/ _/ _/ _/ _/ _/ _/ _/_/ kevin@cursor.biz _/ _/ _/_/_/_/ _/ _/_/_/ _/ _/
On Mon, 2004-05-31 at 09:44, Jeff Sczpel wrote:> [/etc/zaptel.conf] > span=1,1,1,esf,b8zsspan=1,0,1,esf,b8zs -- Eric Wieling * BTEL Consulting * 504-899-1387 x2111 "In a related story, the IRS has recently ruled that the cost of Windows upgrades can NOT be deducted as a gambling loss."
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Unfortunately, I've tried many different timing and build-out settings. Doesn't seem to help a thing. ~jeff On Mon, 31 May 2004 08:16:37 -0700 Eric Wieling <eric@fnords.org> wrote:>On Mon, 2004-05-31 at 09:44, Jeff Sczpel wrote: > >> [/etc/zaptel.conf] >> span=1,1,1,esf,b8zs > >span=1,0,1,esf,b8zs-----BEGIN PGP SIGNATURE----- Note: This signature can be verified at https://www.hushtools.com/verify Version: Hush 2.4 wkYEARECAAYFAkC7U+EACgkQjPSWd97xE06TmwCfWC5RmpxzCqqbaHfvCJ2x/xTMMlsA n0mVNBVT3E+07m4ZeEwrXo9i4RSR =5p9y -----END PGP SIGNATURE----- Concerned about your privacy? Follow this link to get FREE encrypted email: https://www.hushmail.com/?l=2 Free, ultra-private instant messaging with Hush Messenger https://www.hushmail.com/services.php?subloc=messenger&l=434 Promote security and make money with the Hushmail Affiliate Program: https://www.hushmail.com/about.php?subloc=affiliate&l=427
Like everyone else, I'm only guessing here. I've got two different T-1s running on two different Asterisk PBXs. One of them is a PRI circuit from AT&T. Getting that T-1 up was interested because of the cabling. Is it possible that you've got a Cross-over cable connecting the Asterisk to the D-Mark? When dealing with this type of problem; its best to start with the basics and work up. If the wires are crossed; it would impact the D-Channel. -----Original Message----- From: asterisk-users-admin@lists.digium.com [mailto:asterisk-users-admin@lists.digium.com] On Behalf Of Jeff Sczpel Sent: Monday, May 31, 2004 9:44 AM To: asterisk-users@lists.digium.com Subject: [Asterisk-Users] D-Channel Problems -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Good day eveyone, I'm hoping that someone can help me. Perhapps i'm overlooking the obvious, in truth, I hope that I am. I've scoured the mailing list and google, and haven't come up with much. I have a Digium T400P thats been connected to a channel bank for testing for some time now. all has been well. I've now just had installed a PRI from Allegiance Telecom. All 23 chanels are active, and they've told me that the 24th is the dchannel. switchtype is Lucent 5ess. Trunk is esf & b8zs [/etc/zaptel.conf] span=1,1,1,esf,b8zs bchan=1-23 dchan=24 loadzone=us defaultzone=us [/etc/asterisk/zapata.conf] [channels] switchtype=5ess context=incoming-pri signalling=pri_cpe echotraining=yes usecallerid=yes hidecallerid=no callwaiting=no echocancel=yes echocancelwhenbridged=no group=5 immediate=no callerid=asreceived musiconhold=default channel => 1-23 When I start Asterisk, I get this; - -------------------------------------------- May 30 21:54:07 NOTICE[1184048960]: chan_zap.c:5077 handle_init_event: Alarm cleared on channel 10 May 30 21:54:07 NOTICE[1184048960]: chan_zap.c:5077 handle_init_event: Alarm cleared on channel 11 May 30 21:54:07 NOTICE[1184048960]: chan_zap.c:5077 handle_init_event: Alarm cleared on channel 12 May 30 21:54:07 NOTICE[1184048960]: chan_zap.c:5077 handle_init_event: Alarm cleared on channel 13 May 30 21:54:07 NOTICE[1184048960]: chan_zap.c:5077 handle_init_event: Alarm cleared on channel 14 May 30 21:54:07 NOTICE[1184048960]: chan_zap.c:5077 handle_init_event: Alarm cleared on channel 15 May 30 21:54:07 NOTICE[1184048960]: chan_zap.c:5077 handle_init_event: Alarm cleared on channel 16 May 30 21:54:07 NOTICE[1184048960]: chan_zap.c:5077 handle_init_event: Alarm cleared on channel 17 May 30 21:54:07 NOTICE[1184048960]: chan_zap.c:5077 handle_init_event: Alarm cleared on channel 18 May 30 21:54:07 NOTICE[1184048960]: chan_zap.c:5077 handle_init_event: Alarm cleared on channel 19 May 30 21:54:07 NOTICE[1184048960]: chan_zap.c:5077 handle_init_event: Alarm cleared on channel 20 May 30 21:54:07 NOTICE[1184048960]: chan_zap.c:5077 handle_init_event: Alarm cleared on channel 21 May 30 21:54:07 NOTICE[1184048960]: chan_zap.c:5077 handle_init_event: Alarm cleared on channel 22 May 30 21:54:07 NOTICE[1184048960]: chan_zap.c:5077 handle_init_event: Alarm cleared on channel 23 May 30 21:54:07 WARNING[1175660480]: chan_zap.c:6174 zt_pri_error: PRI: Read on 130 failed: Unknown error 500 May 30 21:54:07 NOTICE[1175660480]: chan_zap.c:6905 pri_dchannel: PRI got event: 5 on span 1 - ---------------------------------------------- and Asterisk never brings up the d-channel. No calls are successful in or out. (cannot create channel of type zap) ANY ideas? MUCH Appreciated if anyone can be of assistance. Thanks, Jeff -----BEGIN PGP SIGNATURE----- Note: This signature can be verified at https://www.hushtools.com/verify Version: Hush 2.4 wkYEARECAAYFAkC7RJ0ACgkQjPSWd97xE05+yACfYBrNu3CmPGjcBn5L9NTKxQB41nQA nAhzYt8ngOHXjKE8nAK7SXwFFjUC =Tjpz -----END PGP SIGNATURE----- Concerned about your privacy? Follow this link to get FREE encrypted email: https://www.hushmail.com/?l=2 Free, ultra-private instant messaging with Hush Messenger https://www.hushmail.com/services.php?subloc=messenger&l=434 Promote security and make money with the Hushmail Affiliate Program: https://www.hushmail.com/about.php?subloc=affiliate&l=427 _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users --- Incoming mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.690 / Virus Database: 451 - Release Date: 5/22/2004 --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.690 / Virus Database: 451 - Release Date: 5/22/2004
Dear All, I have used Asterisk for a few months and I have been using a January CVS version, it has been working but has been regularly crashing. I use Asterisk mostly as a softswitch application receiving H323 calls from customers and send to H323 carriers. Since I have been using an older CVS version, the OpenH323 and Pwlib libraries in use have been 1.11.7 and 1.4.11 respectively. I was thinking of using a current asterisk version and see if it is more stable comparing to the version in use. I upgraded to new version, and I understand that with the new version and the H323 code, I need to use the 1.12.2 and 1.5.2 versions of the OpenH323 and Pwlib libraries respectively. I have, therefore, erased the whole Pwlib and Openh323 folders, recreated with the new versions and did the ./configure.....make clean.....make opt procedures to compile the drivers. I have then compiled all the zaptel, libpri, asterisk as usual, but when I ran the asterisk, I noticed that most calls (calls mostly were sent from Cisco AS5300 and Cisco AS5350) were getting one way audio, the calling party was not able to hear anything even the call was connected, I am not sure if the called party would hear anything, but obviously something is not working properly. Can any of your experts out there help please, thanks? TC --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.687 / Virus Database: 448 - Release Date: 5/16/2004