Hello,
I'm running * on a very basic configuration. I have a Wildcard TE405P with
the first T1 connected to a PRI line and the remaining three to Adtran TA750
channel banks with FXS modules.
I successfully configured everything to work with a couple of Swissvoice IP10S
handsets (MGCP) and analog extensions connected to the channel banks.
The problem I'm having is that when I pick up any of the analog handsets I
get no dial tone. Switching works, I can place and receive calls on both analog
and MGCP handsets. The MGCP phones give me dial tone fine when I take them off
the hook, only the analog ones don't do it.
When I run the console with a lot of verbosity I see a message like:
"Apr 26 21:19:57 WARNING[1200825920]: chan_zap.c:4848 handle_init_event:
Unable to play dialtone on channel 25"
And then, right after I get:
"-- Starting simple switch on 'Zap/25-1' "
...and I'm able to dial normally, but no dial tone whatsoever.
Any ideas???
Thanks in advance.
Alex.
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20040426/5f61a6c4/attachment.htm
