asterisk users - Oct 2003 - Has anyone got * working with Xten soft phones

I have tried loads of configurations but I cannot get it to work.

I basically have three computers and want to use soft phones on two of them
to connect to asterisk so I can use them instead of dialling into my X100P
card as the phone bill is getting bigger.

I assume that I can configure * to accept calls from the soft phones and
then route them according to my dial plan. I am basically trying to write
some extensions to asterisk and need to debug the code but need to phone in
to do it.

I could route in from the net if it wasn't for the fact that I am behind a
NAT and I've decided to give up on getting it to work as I have just got
stuck.

So this is another option to attempt to get debugging.

So to paraphrase: Has anyone got a setup working with xten soft phones
behind a NAT and if so could you share your setup with me.

Any help would be appreciated.

Thanks in advance.
Fats.

I have tried loads of configurations but I cannot get it to work.

I basically have three computers and want to use soft phones on two of them
to connect to asterisk so I can use them instead of dialling into my X100P
card as the phone bill is getting bigger.

I assume that I can configure * to accept calls from the soft phones and
then route them according to my dial plan. I am basically trying to write
some extensions to asterisk and need to debug the code but need to phone in
to do it.

I could route in from the net if it wasn't for the fact that I am behind a
NAT and I've decided to give up on getting it to work as I have just got
stuck.

So this is another option to attempt to get debugging.

So to paraphrase: Has anyone got a setup working with xten soft phones
behind a NAT and if so could you share your setup with me.

Any help would be appreciated.

Thanks in advance.
Fats.

I use mine all the time.  Things to check or set:

Under System Settings>Network

1- Set the IP of you * box in "Outbound SIP Proxy"

Under System Settings>Sip Proxy

1- Enable yes
2- Username (the name or number in your SIP.CONF [brackets]
3- Leave Authorized User blank (and remark out in SIP.CONF if you have it in
there.)
4- Obviously set the password
5- Domain/Realm: the IP of your * box.
6- Sip Proxy: the IP of your * box.
7- Send Internal IP: ON

Under System Settings>Audio Device

1- Make sure it's your mic and not soemthing else.


Under Advanced System Settings>Feature Settings

DTMF Force Send In Band: Yes  (is you use inband in your sip.conf)


That should do it.  Mine works fine.

Regards,
Joe


-----Original Message-----
From: asterisk-users-admin@lists.digium.com
[mailto:asterisk-users-admin@lists.digium.com] On Behalf Of Fats Neutron
Sent: Thursday, October 02, 2003 9:18 AM
To: asterisk-users@lists.digium.com
Subject: [Asterisk-Users] Has anyone got * working with Xten soft phones


I have tried loads of configurations but I cannot get it to work.

I basically have three computers and want to use soft phones on two of them
to connect to asterisk so I can use them instead of dialling into my X100P
card as the phone bill is getting bigger.

I assume that I can configure * to accept calls from the soft phones and
then route them according to my dial plan. I am basically trying to write
some extensions to asterisk and need to debug the code but need to phone in
to do it.

I could route in from the net if it wasn't for the fact that I am behind a
NAT and I've decided to give up on getting it to work as I have just got
stuck.

So this is another option to attempt to get debugging.

So to paraphrase: Has anyone got a setup working with xten soft phones
behind a NAT and if so could you share your setup with me.

Any help would be appreciated.

Thanks in advance.
Fats.

_______________________________________________
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users