You can't use music on hold with G729 unless you buy a G729 license from
Digium. I doubt you can use the "r" option either since that needs
Asterisk to generate a ringing sound and unless you have the G729 codec
for Asterisk that will fail.
Unless you buy a G729 license you will not be able to use ANY sound
generated by Asterisk.
"Not Acceptable Here" usually means one side is tying to use a codec
the
other side doesn't support.
On Thu, 2003-09-11 at 03:59, Kim C. Callis wrote:> Yesterday, I started to experiment with Cisco to Cisco SIP calls using
> the g729 codec. According to the documentation, both the ATA-186 and
> 7960 are able to make use of the g729.
>
> >From an earlier e-mail, I made a change to the configuration of the
ATA,
> changing the values:
>
> LBRCodec:3
> RxCodec: 3
> TxCodec: 3
>
> The first thing I noticed was that when I did a sip show channels, the
> format had changed from ULAW to ALAW. The problem that I am having is
> that when I attempt to call any of the 7960, I get the following:
>
> -- Executing Dial("SIP/1200-3bc9",
"SIP/1000|50|rtm") in new stack
> -- Called 1000
> -- Called 1200
> -- Started music on hold, class 'default', on SIP/1200-3bc9
> -- Got SIP response 488 "Not Acceptable Here" back from
66.12.5.14
> -- Got SIP response 488 "Not Acceptable Here" back from
67.15.17.22
>
> So is there something I need to set on the 7960s in order to make use of
> that particular codec? Am I missing something in the compiling of *?
>
> Any help would be very appreciated!
>
> Kim Callis
>
>
>
>
>
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users@lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
--
BTEL Consulting
850-484-4535 x2111 (Office)
504-595-3916 x2111 (Experimental)
877-552-0838 (Backup Phone)