Hi List, Could some kind soul post me a quick config that makes use of a Wildcat X100P when I do a show channels nothing is there lsmod shows the wcfxo and related drivers loaded and with no errors zap show channels is blank as well mucho thanks
On Tue, 2003-08-19 at 16:12, John Brown wrote:> Hi List, > > Could some kind soul post me a quick config > that makes use of a Wildcat X100P > > when I do a show channels nothing is there > > lsmod shows the wcfxo and related drivers loaded > and with no errors > > zap show channels is blank as wellshow channels is for channels that are in use. First look and see if there is a /proc/zap directory with your wildcard listed in there. If so then you just need to make sure that asterisk knows about it. Then call it from an outside line and watch as it picks up the line. -- Steven Critchfield <critch@basesys.com>
You did run "ztcfg -vv" after you modprobed for wsfxo and zaptel, right? I recently got a X100P and it wouldn't show up until I ran the config. John. ----- Original Message ----- From: "John Brown" <jmbrown@chagresventures.com> To: <asterisk-users@lists.digium.com> Sent: Tuesday, August 19, 2003 4:12 PM Subject: [Asterisk-Users] trying to make a X100P work> Hi List, > > Could some kind soul post me a quick config > that makes use of a Wildcat X100P > > when I do a show channels nothing is there > > lsmod shows the wcfxo and related drivers loaded > and with no errors > > zap show channels is blank as well > > > mucho thanks > > > _______________________________________________ > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users