We have bought and installed 10 channels worth of G.729. We reset our ATA186 boxes to use this encoding, and it seemed to be working. However, we analyzed the data stream and saw that the ATAs were sending about 4 kbps, while the stream from asterisk was still 64 kbps, which says to me that asterisk is still using ?-law. I looked in the sample sip.conf file and don't see any place to set the encoding. How do I do this? Thanks...
In the [general] section put an allow=g729 Jeremy McNamara Jim Gottlieb wrote:>We have bought and installed 10 channels worth of G.729. We reset our >ATA186 boxes to use this encoding, and it seemed to be working. > >However, we analyzed the data stream and saw that the ATAs were sending >about 4 kbps, while the stream from asterisk was still 64 kbps, which >says to me that asterisk is still using ?-law. > >I looked in the sample sip.conf file and don't see any place to set the >encoding. How do I do this? > >Thanks... > >_______________________________________________ >Asterisk-Users mailing list >Asterisk-Users@lists.digium.com >http://lists.digium.com/mailman/listinfo/asterisk-users > >
in [general] of sip.conf: disallow=all allow=g729 Mark On Mon, 7 Apr 2003, Jim Gottlieb wrote:> We have bought and installed 10 channels worth of G.729. We reset our > ATA186 boxes to use this encoding, and it seemed to be working. > > However, we analyzed the data stream and saw that the ATAs were sending > about 4 kbps, while the stream from asterisk was still 64 kbps, which > says to me that asterisk is still using ?-law. > > I looked in the sample sip.conf file and don't see any place to set the > encoding. How do I do this? > > Thanks... > > _______________________________________________ > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users >