thr3ads.net - Xen devel - [Xen-devel] a question about popen() performance on domU [Nov 2005]

If this information is useful, please help other people find it:
Share via:

xuehai zhang

2005-Nov-23 20:25 UTC

[Xen-devel] a question about popen() performance on domU

Dear all,
When I compared the performance of some application on both a Xen domU and a
standard linux machine
(where domU runs on a similar physical mahine), I notice the application runs
faster on the domU
than on the physical machine. Instrumenting the application code shows the
application spends more
time on popen() calls on domU than on the physical machine. I wonder if 
xenlinux does some special
modification of the popen code to improve its performance than the original
Linux popen code?
Thanks in advance for your help.
Xuehai

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel

Petersson, Mats

2005-Nov-24 10:07 UTC

head link

RE: [Xen-devel] a question about popen() performance on domU

I did have a look at popen, and essentially, it does the following [ the
real code is MUCH more complicated, doing lots of open/dup/close on
pipes and stuff]:
if (!fork())
 exec("/bin/sh", "sh", "-c", cmd, NULL); 

The fork creates another process, which then executes the /bin/sh, which
again causes another fork/exec to take place in the effort of executing
the actual command given. 

So the major component of popen would be fork() and execl(), both of
which cause, amongst other things, a lot of page-table work and
task-switching. 

Note that popen is implemented in glibc [I took the 2.3.6 source code
from www.gnu.org for my look at this], so there''s no difference in the
implementation of popen itself - the difference lies in how the Linux
kernel handles fork() and exec(), but maybe more importantly, how
task-switches and page-tables are handled in Linux native and Xen-Linux.
Because Xen keeps track of the page-tables on top of Linux''s handling
of
page-tables, you get some extra work here. So, it should really be
slower on Xen than on native Linux. 

[In fact, the question came up not so long ago, why Xen was SLOWER than
native Linux on popen (and some others) in a particular benchmark, and
the result of that investigation was that it''s down to, mainly,
task-switching takes longer in Xen.]

The reason it is not would probably have something to do with the
differences in hardware on Linux vs. Xen platforms, perhaps the fact
that your file-system is a virtual block-device and thus lives inside a
file that is perhaps better cached or otherwise handled in a different
way on the Xen-system. 

Now, I''m not saying that there isn''t a possibility that
something is
managed differently in Xen that makes this run faster - I just don''t
really see how that would be likely, since everything that happens in
the system is going to be MORE complicated by the extra layer of Xen
involved. 

If anyone else has some thoughts on this subject, it would be
interesting to hear.

--
Mats

> -----Original Message-----
> From: xen-devel-bounces@lists.xensource.com 
> [mailto:xen-devel-bounces@lists.xensource.com] On Behalf Of 
> xuehai zhang
> Sent: 23 November 2005 20:26
> To: xen-devel@lists.xensource.com
> Cc: Tim Freeman; Kate Keahey
> Subject: [Xen-devel] a question about popen() performance on domU
> 
> Dear all,
> When I compared the performance of some application on both a 
> Xen domU and a standard linux machine (where domU runs on a 
> similar physical mahine), I notice the application runs 
> faster on the domU than on the physical machine. 
> Instrumenting the application code shows the application 
> spends more time on popen() calls on domU than on the 
> physical machine. I wonder if  xenlinux does some special 
> modification of the popen code to improve its performance 
> than the original Linux popen code?
> Thanks in advance for your help.
> Xuehai
> 
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@lists.xensource.com
> http://lists.xensource.com/xen-devel
> 
> 

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel

xuehai zhang

2005-Nov-24 14:02 UTC

head link

Re: [Xen-devel] a question about popen() performance on domU

Mats,

Thanks a lot for the response.
> I did have a look at popen, and essentially, it does the following [ the
> real code is MUCH more complicated, doing lots of open/dup/close on
> pipes and stuff]:
> if (!fork())
>  exec("/bin/sh", "sh", "-c", cmd, NULL); 
I took a look at the popen source code too yesterday and the above lines are the
esstential part. A
thread at gnu list
(http://lists.gnu.org/archive/html/bug-global/2005-06/msg00001.html) suggets
popen() might depend on how fast /bin/sh is executed. On both my VM and the
physical machine, the
kernel version is 2.6.11, glibc version is 2.3.2.ds1-21, and /bin/sh is linked
to /bin/bash. I also
tried to see any difference of the shared libraries used by /bin/sh on both
machines and found
/bin/sh on the physical machine uses libraries from /lib/tls while for the VM
this directory is
disabled.

VM$ ldd /bin/sh
         libncurses.so.5 => /lib/libncurses.so.5 (0xb7fa7000)
         libdl.so.2 => /lib/libdl.so.2 (0xb7fa3000)
         libc.so.6 => /lib/libc.so.6 (0xb7e70000)
         /lib/ld-.so.2 => /lib/ld-.so.2 (0xb7fea000)

PHYSICAL$  ldd /bin/sh
         libncurses.so.5 => /lib/libncurses.so.5 (0xb7fa6000)
         libdl.so.2 => /lib/tls/libdl.so.2 (0xb7fa2000)
         libc.so.6 => /lib/tls/libc.so.6 (0xb7e6d000)
         /lib/ld-.so.2 => /lib/ld-.so.2 (0xb7fea000)
> The fork creates another process, which then executes the /bin/sh, which
> again causes another fork/exec to take place in the effort of executing
> the actual command given. 
> 
> So the major component of popen would be fork() and execl(), both of
> which cause, amongst other things, a lot of page-table work and
> task-switching. 
> 
> Note that popen is implemented in glibc [I took the 2.3.6 source code
> from www.gnu.org for my look at this], so there''s no difference in
the
> implementation of popen itself - the difference lies in how the Linux
> kernel handles fork() and exec(), but maybe more importantly, how
> task-switches and page-tables are handled in Linux native and Xen-Linux.
> Because Xen keeps track of the page-tables on top of Linux''s
handling of
> page-tables, you get some extra work here. So, it should really be
> slower on Xen than on native Linux. 
> [In fact, the question came up not so long ago, why Xen was SLOWER than
> native Linux on popen (and some others) in a particular benchmark, and
> the result of that investigation was that it''s down to, mainly,
> task-switching takes longer in Xen.]
I agree with your explanation about Xen was SLOWER than native Linux on popen
because of the longer
task-switching in Xen. The problem I met (popen runs faster on Xen VM than the
physical machine)
looks abnormal. I ran several home-made benchmarking programming and used the
"strace" tool to trace
the system call performance. The first program is to test the performance of
both popen and pclose
(a loop of popen call with a followup pclose call) and the source of the program
and the strace
results are available at
http://people.cs.uchicago.edu/~hai/tmp/gt2gram/strace-popen/strace.txt. The
results shows the waitpid syscall costs more time on physical machine than on
the VM (see the
usecs/call valuee in the following table).

		% time     seconds  usecs/call     calls    errors syscall
		------ ----------- ----------- --------- --------- ----------------
VM:		63.43    0.127900        6395        20           waitpid
PHYSICAL
MACHINE:	93.87    0.532498       26625        20           waitpid

waitpid is called by pclose as shown in the glibc source code. So, my original
post questioning the
performance of popen should take pclose into consideration too. A more accurate
question I should
post is, popen+pclose executes faster on my VM than my physical machine. The
popen/pclose benchmark
I did narrows the problem down to waitpid that waitpid somehow is suffering on
the physical machine.
So, I did a followup experiment to test the fork and waitpid performance on both
machines. The
program is a loop of fork call with a followup waitpid call. The source of the
program and the
strace results are available at 
http://people.cs.uchicago.edu/~hai/tmp/gt2gram/strace-fork/strace.txt. The
strace results confirm
the waitpid costs more time on the physical machine (154 usec/call) than the VM
(56 usec/call).
However, the program runs faster on the physical machine (not like the
popen/pclose program) and the
results suggest the fork syscall used on the VM costs more time than the clone
syscall on the
physical machine. I have a question here, why the physical machine
doesn''t use fork syscall but the
clone syscall for the same program?
> The reason it is not would probably have something to do with the
> differences in hardware on Linux vs. Xen platforms, perhaps the fact
> that your file-system is a virtual block-device and thus lives inside a
> file that is perhaps better cached or otherwise handled in a different
> way on the Xen-system. 
Let me describe the hardware context of my VM and physical machine. The host of
my VM and the
physical machine I tested against the VM, are two nodes of a physical cluster
with the same hardware
configuration (Dual Intel PIII 498.799 MHz CPU, 512MB memory, a 4GB HD with same
partitions). The
physical machine is rebooted with "nosmp". The VM host  is rebooted
into Xen with "nosmp" (Xen
version information is "Latest ChangeSet: 2005/05/03 17:30:40 1.1846 
4277a730mvnFSFXrxJpVRNk8hjD4Vg"). Xen dom0 is assigned 96MB memory and the
VM is the only user
domain running on the VM host with 395MB memory. Both dom0 and the VM are pinned
to CPU 0.

Yes, the backends of the VM''s VBDs are loopback files in dom0. Three
loopback files are used to map
to three partitions inside of the VM. I acutally thought about the possible
caching effect of the
VM''s VBD backends, but not sure how to testify it and compare it with
the physical machine. Is it
possible the Xen has different assurance of writing back than the physical
machine, that is, the
data is kept in memory longer before is actually written to disk?
> Now, I''m not saying that there isn''t a possibility that
something is
> managed differently in Xen that makes this run faster - I just
don''t
> really see how that would be likely, since everything that happens in
> the system is going to be MORE complicated by the extra layer of Xen
> involved.
> If anyone else has some thoughts on this subject, it would be
> interesting to hear.
I agree. But given the VM having same hardware/software configuration as the
physical machine, it
runs faster still looks abnormal to me. I wonder if there is any other more
efficient debugging
strategies I can use to investigate it. I appreciate if any one has any more
suggestions.

Thanks again.

Xuehai
> 
>>-----Original Message-----
>>From: xen-devel-bounces@lists.xensource.com 
>>[mailto:xen-devel-bounces@lists.xensource.com] On Behalf Of 
>>xuehai zhang
>>Sent: 23 November 2005 20:26
>>To: xen-devel@lists.xensource.com
>>Cc: Tim Freeman; Kate Keahey
>>Subject: [Xen-devel] a question about popen() performance on domU
>>
>>Dear all,
>>When I compared the performance of some application on both a 
>>Xen domU and a standard linux machine (where domU runs on a 
>>similar physical mahine), I notice the application runs 
>>faster on the domU than on the physical machine. 
>>Instrumenting the application code shows the application 
>>spends more time on popen() calls on domU than on the 
>>physical machine. I wonder if  xenlinux does some special 
>>modification of the popen code to improve its performance 
>>than the original Linux popen code?
>>Thanks in advance for your help.
>>Xuehai
>>
>>_______________________________________________
>>Xen-devel mailing list
>>Xen-devel@lists.xensource.com
>>http://lists.xensource.com/xen-devel
>>
>>
> 
> 
> 

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel

Petersson, Mats

2005-Nov-24 14:47 UTC

head link

RE: [Xen-devel] a question about popen() performance on domU

See comments below.  
> -----Original Message-----
> From: xuehai zhang [mailto:hai@cs.uchicago.edu] 
> Sent: 24 November 2005 14:02
> To: Petersson, Mats
> Cc: xen-devel@lists.xensource.com; Tim Freeman; Kate Keahey
> Subject: Re: [Xen-devel] a question about popen() performance on domU
> 
> Mats,
> 
> Thanks a lot for the response.
> 
> > I did have a look at popen, and essentially, it does the 
> following [ 
> > the real code is MUCH more complicated, doing lots of 
> open/dup/close 
> > on pipes and stuff]:
> > if (!fork())
> >  exec("/bin/sh", "sh", "-c", cmd, NULL);
> 
> I took a look at the popen source code too yesterday and the 
> above lines are the esstential part. A thread at gnu list 
> (http://lists.gnu.org/archive/html/bug-global/2005-06/msg00001
> .html) suggets
> popen() might depend on how fast /bin/sh is executed. On both 
> my VM and the physical machine, the kernel version is 2.6.11, 
> glibc version is 2.3.2.ds1-21, and /bin/sh is linked to 
> /bin/bash. I also tried to see any difference of the shared 
> libraries used by /bin/sh on both machines and found /bin/sh 
> on the physical machine uses libraries from /lib/tls while 
> for the VM this directory is disabled.
> 
> VM$ ldd /bin/sh
>          libncurses.so.5 => /lib/libncurses.so.5 (0xb7fa7000)
>          libdl.so.2 => /lib/libdl.so.2 (0xb7fa3000)
>          libc.so.6 => /lib/libc.so.6 (0xb7e70000)
>          /lib/ld-.so.2 => /lib/ld-.so.2 (0xb7fea000)
> 
> PHYSICAL$  ldd /bin/sh
>          libncurses.so.5 => /lib/libncurses.so.5 (0xb7fa6000)
>          libdl.so.2 => /lib/tls/libdl.so.2 (0xb7fa2000)
>          libc.so.6 => /lib/tls/libc.so.6 (0xb7e6d000)
>          /lib/ld-.so.2 => /lib/ld-.so.2 (0xb7fea000)
In this particular case, I would think that lib/tls is not a factor, but
it may be worth disabling the tls libraries on the pysical machine too,
just to make sure... [just "mv /lib/tls /lib/tls.disabled" should do
it]. 
> 
> > The fork creates another process, which then executes the /bin/sh, 
> > which again causes another fork/exec to take place in the effort of 
> > executing the actual command given.
> > 
> > So the major component of popen would be fork() and 
> execl(), both of 
> > which cause, amongst other things, a lot of page-table work and 
> > task-switching.
> > 
> > Note that popen is implemented in glibc [I took the 2.3.6 
> source code 
> > from www.gnu.org for my look at this], so there''s no 
> difference in the 
> > implementation of popen itself - the difference lies in how 
> the Linux 
> > kernel handles fork() and exec(), but maybe more importantly, how 
> > task-switches and page-tables are handled in Linux native 
> and Xen-Linux.
> > Because Xen keeps track of the page-tables on top of 
> Linux''s handling 
> > of page-tables, you get some extra work here. So, it should 
> really be 
> > slower on Xen than on native Linux.
> > [In fact, the question came up not so long ago, why Xen was SLOWER 
> > than native Linux on popen (and some others) in a particular 
> > benchmark, and the result of that investigation was that 
> it''s down to, 
> > mainly, task-switching takes longer in Xen.]
> 
> I agree with your explanation about Xen was SLOWER than 
> native Linux on popen because of the longer task-switching in 
> Xen. The problem I met (popen runs faster on Xen VM than the 
> physical machine) looks abnormal. I ran several home-made 
> benchmarking programming and used the "strace" tool to trace 
> the system call performance. The first program is to test the 
> performance of both popen and pclose (a loop of popen call 
> with a followup pclose call) and the source of the program 
> and the strace results are available at 
> http://people.cs.uchicago.edu/~hai/tmp/gt2gram/strace-popen/st
> race.txt. The results shows the waitpid syscall costs more 
> time on physical machine than on the VM (see the usecs/call 
> valuee in the following table).
> 
> 		% time     seconds  usecs/call     calls    
> errors syscall
> 		------ ----------- ----------- --------- 
> --------- ----------------
> VM:		63.43    0.127900        6395        20         
>   waitpid
> PHYSICAL
> MACHINE:	93.87    0.532498       26625        20         
>   waitpid
> 
> waitpid is called by pclose as shown in the glibc source 
> code. So, my original post questioning the performance of 
> popen should take pclose into consideration too. A more 
> accurate question I should post is, popen+pclose executes 
> faster on my VM than my physical machine. The popen/pclose 
> benchmark I did narrows the problem down to waitpid that 
> waitpid somehow is suffering on the physical machine. 
> So, I did a followup experiment to test the fork and waitpid 
> performance on both machines. The program is a loop of fork 
> call with a followup waitpid call. The source of the program 
> and the strace results are available at 
> http://people.cs.uchicago.edu/~hai/tmp/gt2gram/strace-fork/str
> ace.txt. The strace results confirm the waitpid costs more 
> time on the physical machine (154 usec/call) than the VM (56 
> usec/call). 
> However, the program runs faster on the physical machine (not 
> like the popen/pclose program) and the results suggest the 
> fork syscall used on the VM costs more time than the clone 
> syscall on the physical machine. I have a question here, why 
> the physical machine doesn''t use fork syscall but the clone 
> syscall for the same program?
Because it''s using the same source for glibc! glibc says to use
_IO_fork(), which is calling the fork syscall. Clone would probably do
the same thing, but for whatever good or bad reason, the author(s) of
thise code chose to use fork. There may be good reasons, or no reason at
all to do it this way. I couldn''t say. I don''t think it makes
a whole
lot of difference if the actual command executed by popen is actually
"doing something", rather than just an empty "return".
> 
> > The reason it is not would probably have something to do with the 
> > differences in hardware on Linux vs. Xen platforms, perhaps 
> the fact 
> > that your file-system is a virtual block-device and thus 
> lives inside 
> > a file that is perhaps better cached or otherwise handled in a 
> > different way on the Xen-system.
> 
> Let me describe the hardware context of my VM and physical 
> machine. The host of my VM and the physical machine I tested 
> against the VM, are two nodes of a physical cluster with the 
> same hardware configuration (Dual Intel PIII 498.799 MHz CPU, 
> 512MB memory, a 4GB HD with same partitions). The physical 
> machine is rebooted with "nosmp". The VM host  is rebooted 
> into Xen with "nosmp" (Xen version information is "Latest 
> ChangeSet: 2005/05/03 17:30:40 1.1846 
> 4277a730mvnFSFXrxJpVRNk8hjD4Vg"). Xen dom0 is assigned 96MB 
> memory and the VM is the only user domain running on the VM 
> host with 395MB memory. Both dom0 and the VM are pinned to CPU 0.
> 
> Yes, the backends of the VM''s VBDs are loopback files in 
> dom0. Three loopback files are used to map to three 
> partitions inside of the VM. I acutally thought about the 
> possible caching effect of the VM''s VBD backends, but not 
> sure how to testify it and compare it with the physical 
> machine. Is it possible the Xen has different assurance of 
> writing back than the physical machine, that is, the data is 
> kept in memory longer before is actually written to disk?
Xen itself doesn''t know ANYTHING about the disk/file where the data for
the Dom0 or DomU comes from, so no, Xen would not do that. However, the
loopback file-system that is involved in VBD''s would potentially do
things that are different from the actual hardware. 

I think you should be able to mount the virtual disk as a "device" on
your system. I don''t know of the top of my head how to do that, but
essentially something like this:
mount myimage.hdd loop/ -t ext3 [additional parameters may be needed]. 

You could then do "chroot loop/", and perform your tests there. This
should execute the same thing from the same place on the native linux as
you would in DomU. 

Now, this may not run faster on native than your original setup, but I
wouldn''t be surprised if it does... 

--
Mats> 
> > Now, I''m not saying that there isn''t a possibility
that
> something is 
> > managed differently in Xen that makes this run faster - I 
> just don''t 
> > really see how that would be likely, since everything that 
> happens in 
> > the system is going to be MORE complicated by the extra 
> layer of Xen 
> > involved.
> 
> > If anyone else has some thoughts on this subject, it would be 
> > interesting to hear.
> 
> I agree. But given the VM having same hardware/software 
> configuration as the physical machine, it runs faster still 
> looks abnormal to me. I wonder if there is any other more 
> efficient debugging strategies I can use to investigate it. I 
> appreciate if any one has any more suggestions.
> 
> Thanks again.
> 
> Xuehai
> 
> > 
> >>-----Original Message-----
> >>From: xen-devel-bounces@lists.xensource.com
> >>[mailto:xen-devel-bounces@lists.xensource.com] On Behalf Of xuehai 
> >>zhang
> >>Sent: 23 November 2005 20:26
> >>To: xen-devel@lists.xensource.com
> >>Cc: Tim Freeman; Kate Keahey
> >>Subject: [Xen-devel] a question about popen() performance on domU
> >>
> >>Dear all,
> >>When I compared the performance of some application on both 
> a Xen domU 
> >>and a standard linux machine (where domU runs on a similar physical
> >>mahine), I notice the application runs faster on the domU 
> than on the 
> >>physical machine.
> >>Instrumenting the application code shows the application 
> spends more 
> >>time on popen() calls on domU than on the physical machine. 
> I wonder 
> >>if  xenlinux does some special modification of the popen code to 
> >>improve its performance than the original Linux popen code?
> >>Thanks in advance for your help.
> >>Xuehai
> >>
> >>_______________________________________________
> >>Xen-devel mailing list
> >>Xen-devel@lists.xensource.com
> >>http://lists.xensource.com/xen-devel
> >>
> >>
> > 
> > 
> > 
> 
> 
> 

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel

xuehai zhang

2005-Nov-24 15:40 UTC

head link

Re: [Xen-devel] a question about popen() performance on domU

> See comments below.  
Thanks Mats. I have more questions about your comments below.

Xuehai
>>-----Original Message-----
>>From: xuehai zhang [mailto:hai@cs.uchicago.edu] 
>>Sent: 24 November 2005 14:02
>>To: Petersson, Mats
>>Cc: xen-devel@lists.xensource.com; Tim Freeman; Kate Keahey
>>Subject: Re: [Xen-devel] a question about popen() performance on domU
>>
>>Mats,
>>
>>Thanks a lot for the response.
>>
>>
>>>I did have a look at popen, and essentially, it does the 
>>
>>following [ 
>>
>>>the real code is MUCH more complicated, doing lots of 
>>
>>open/dup/close 
>>
>>>on pipes and stuff]:
>>>if (!fork())
>>> exec("/bin/sh", "sh", "-c", cmd,
NULL);
>>
>>I took a look at the popen source code too yesterday and the 
>>above lines are the esstential part. A thread at gnu list 
>>(http://lists.gnu.org/archive/html/bug-global/2005-06/msg00001
>>.html) suggets
>>popen() might depend on how fast /bin/sh is executed. On both 
>>my VM and the physical machine, the kernel version is 2.6.11, 
>>glibc version is 2.3.2.ds1-21, and /bin/sh is linked to 
>>/bin/bash. I also tried to see any difference of the shared 
>>libraries used by /bin/sh on both machines and found /bin/sh 
>>on the physical machine uses libraries from /lib/tls while 
>>for the VM this directory is disabled.
>>
>>VM$ ldd /bin/sh
>>         libncurses.so.5 => /lib/libncurses.so.5 (0xb7fa7000)
>>         libdl.so.2 => /lib/libdl.so.2 (0xb7fa3000)
>>         libc.so.6 => /lib/libc.so.6 (0xb7e70000)
>>         /lib/ld-.so.2 => /lib/ld-.so.2 (0xb7fea000)
>>
>>PHYSICAL$  ldd /bin/sh
>>         libncurses.so.5 => /lib/libncurses.so.5 (0xb7fa6000)
>>         libdl.so.2 => /lib/tls/libdl.so.2 (0xb7fa2000)
>>         libc.so.6 => /lib/tls/libc.so.6 (0xb7e6d000)
>>         /lib/ld-.so.2 => /lib/ld-.so.2 (0xb7fea000)
> 
> 
> In this particular case, I would think that lib/tls is not a factor, but
> it may be worth disabling the tls libraries on the pysical machine too,
> just to make sure... [just "mv /lib/tls /lib/tls.disabled" should
do
> it]. 
I don''t think /lib/tls is the factor too. I did rerun the tests with
tls disabled on the physical
machine and it gave even worse performance for the tests. So, I switched it
back.
> 
>>>The fork creates another process, which then executes the /bin/sh, 
>>>which again causes another fork/exec to take place in the effort of 
>>>executing the actual command given.
>>>
>>>So the major component of popen would be fork() and 
>>
>>execl(), both of 
>>
>>>which cause, amongst other things, a lot of page-table work and 
>>>task-switching.
>>>
>>>Note that popen is implemented in glibc [I took the 2.3.6 
>>
>>source code 
>>
>>>from www.gnu.org for my look at this], so there''s no 
>>
>>difference in the 
>>
>>>implementation of popen itself - the difference lies in how 
>>
>>the Linux 
>>
>>>kernel handles fork() and exec(), but maybe more importantly, how 
>>>task-switches and page-tables are handled in Linux native 
>>
>>and Xen-Linux.
>>
>>>Because Xen keeps track of the page-tables on top of 
>>
>>Linux''s handling 
>>
>>>of page-tables, you get some extra work here. So, it should 
>>
>>really be 
>>
>>>slower on Xen than on native Linux.
>>>[In fact, the question came up not so long ago, why Xen was SLOWER 
>>>than native Linux on popen (and some others) in a particular 
>>>benchmark, and the result of that investigation was that 
>>
>>it''s down to, 
>>
>>>mainly, task-switching takes longer in Xen.]
>>
>>I agree with your explanation about Xen was SLOWER than 
>>native Linux on popen because of the longer task-switching in 
>>Xen. The problem I met (popen runs faster on Xen VM than the 
>>physical machine) looks abnormal. I ran several home-made 
>>benchmarking programming and used the "strace" tool to trace 
>>the system call performance. The first program is to test the 
>>performance of both popen and pclose (a loop of popen call 
>>with a followup pclose call) and the source of the program 
>>and the strace results are available at 
>>http://people.cs.uchicago.edu/~hai/tmp/gt2gram/strace-popen/st
>>race.txt. The results shows the waitpid syscall costs more 
>>time on physical machine than on the VM (see the usecs/call 
>>valuee in the following table).
>>
>>		% time     seconds  usecs/call     calls    
>>errors syscall
>>		------ ----------- ----------- --------- 
>>--------- ----------------
>>VM:		63.43    0.127900        6395        20         
>>  waitpid
>>PHYSICAL
>>MACHINE:	93.87    0.532498       26625        20         
>>  waitpid
>>
>>waitpid is called by pclose as shown in the glibc source 
>>code. So, my original post questioning the performance of 
>>popen should take pclose into consideration too. A more 
>>accurate question I should post is, popen+pclose executes 
>>faster on my VM than my physical machine. The popen/pclose 
>>benchmark I did narrows the problem down to waitpid that 
>>waitpid somehow is suffering on the physical machine. 
>>So, I did a followup experiment to test the fork and waitpid 
>>performance on both machines. The program is a loop of fork 
>>call with a followup waitpid call. The source of the program 
>>and the strace results are available at 
>>http://people.cs.uchicago.edu/~hai/tmp/gt2gram/strace-fork/str
>>ace.txt. The strace results confirm the waitpid costs more 
>>time on the physical machine (154 usec/call) than the VM (56 
>>usec/call). 
>>However, the program runs faster on the physical machine (not 
>>like the popen/pclose program) and the results suggest the 
>>fork syscall used on the VM costs more time than the clone 
>>syscall on the physical machine. I have a question here, why 
>>the physical machine doesn''t use fork syscall but the clone 
>>syscall for the same program?
> 
> 
> Because it''s using the same source for glibc! glibc says to use
> _IO_fork(), which is calling the fork syscall. Clone would probably do
> the same thing, but for whatever good or bad reason, the author(s) of
> thise code chose to use fork. There may be good reasons, or no reason at
> all to do it this way. I couldn''t say. I don''t think it
makes a whole
> lot of difference if the actual command executed by popen is actually
> "doing something", rather than just an empty "return".
Do you have any suggestion why the same code uses different syscalls on two
machines which have the
same kernel and glibc?
>>>The reason it is not would probably have something to do with the 
>>>differences in hardware on Linux vs. Xen platforms, perhaps 
>>
>>the fact 
>>
>>>that your file-system is a virtual block-device and thus 
>>
>>lives inside 
>>
>>>a file that is perhaps better cached or otherwise handled in a 
>>>different way on the Xen-system.
>>
>>Let me describe the hardware context of my VM and physical 
>>machine. The host of my VM and the physical machine I tested 
>>against the VM, are two nodes of a physical cluster with the 
>>same hardware configuration (Dual Intel PIII 498.799 MHz CPU, 
>>512MB memory, a 4GB HD with same partitions). The physical 
>>machine is rebooted with "nosmp". The VM host  is rebooted 
>>into Xen with "nosmp" (Xen version information is "Latest
>>ChangeSet: 2005/05/03 17:30:40 1.1846 
>>4277a730mvnFSFXrxJpVRNk8hjD4Vg"). Xen dom0 is assigned 96MB 
>>memory and the VM is the only user domain running on the VM 
>>host with 395MB memory. Both dom0 and the VM are pinned to CPU 0.
>>
>>Yes, the backends of the VM''s VBDs are loopback files in 
>>dom0. Three loopback files are used to map to three 
>>partitions inside of the VM. I acutally thought about the 
>>possible caching effect of the VM''s VBD backends, but not 
>>sure how to testify it and compare it with the physical 
>>machine. Is it possible the Xen has different assurance of 
>>writing back than the physical machine, that is, the data is 
>>kept in memory longer before is actually written to disk?
> 
> 
> Xen itself doesn''t know ANYTHING about the disk/file where the
data for
> the Dom0 or DomU comes from, so no, Xen would not do that. However, the
> loopback file-system that is involved in VBD''s would potentially
do
> things that are different from the actual hardware.
So, there is possbility that the loopback file-system can do something tricky
like caching and
results in better performance for applications running inside of the VM?
> I think you should be able to mount the virtual disk as a
"device" on
> your system. 
What does "your system" here refer to? Does it mean dom0 or inside of
domU?
> I don''t know of the top of my head how to do that, but
> essentially something like this:
> mount myimage.hdd loop/ -t ext3 [additional parameters may be needed]. 
> 
> You could then do "chroot loop/", and perform your tests there.
This
> should execute the same thing from the same place on the native linux as
> you would in DomU. 
> 
> Now, this may not run faster on native than your original setup, but I
> wouldn''t be surprised if it does... 
This is interesting. I will try to run the same tests if I canmount the virtual
disk as "device"
successfully.

Thanks.

Xuehai> 
>>>Now, I''m not saying that there isn''t a possibility
that
>>
>>something is 
>>
>>>managed differently in Xen that makes this run faster - I 
>>
>>just don''t 
>>
>>>really see how that would be likely, since everything that 
>>
>>happens in 
>>
>>>the system is going to be MORE complicated by the extra 
>>
>>layer of Xen 
>>
>>>involved.
>>
>>>If anyone else has some thoughts on this subject, it would be 
>>>interesting to hear.
>>
>>I agree. But given the VM having same hardware/software 
>>configuration as the physical machine, it runs faster still 
>>looks abnormal to me. I wonder if there is any other more 
>>efficient debugging strategies I can use to investigate it. I 
>>appreciate if any one has any more suggestions.
>>
>>Thanks again.
>>
>>Xuehai
>>
>>
>>>>-----Original Message-----
>>>>From: xen-devel-bounces@lists.xensource.com
>>>>[mailto:xen-devel-bounces@lists.xensource.com] On Behalf Of
xuehai
>>>>zhang
>>>>Sent: 23 November 2005 20:26
>>>>To: xen-devel@lists.xensource.com
>>>>Cc: Tim Freeman; Kate Keahey
>>>>Subject: [Xen-devel] a question about popen() performance on
domU
>>>>
>>>>Dear all,
>>>>When I compared the performance of some application on both 
>>
>>a Xen domU 
>>
>>>>and a standard linux machine (where domU runs on a similar
physical
>>>>mahine), I notice the application runs faster on the domU 
>>
>>than on the 
>>
>>>>physical machine.
>>>>Instrumenting the application code shows the application 
>>
>>spends more 
>>
>>>>time on popen() calls on domU than on the physical machine. 
>>
>>I wonder 
>>
>>>>if  xenlinux does some special modification of the popen code to
>>>>improve its performance than the original Linux popen code?
>>>>Thanks in advance for your help.
>>>>Xuehai
>>>>
>>>>_______________________________________________
>>>>Xen-devel mailing list
>>>>Xen-devel@lists.xensource.com
>>>>http://lists.xensource.com/xen-devel
>>>>
>>>>
>>>
>>>
>>>
>>
>>
> 
> 

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel

Petersson, Mats

2005-Nov-24 15:51 UTC

head link

RE: [Xen-devel] a question about popen() performance on domU

> -----Original Message-----
> From: xuehai zhang [mailto:hai@cs.uchicago.edu] 
> Sent: 24 November 2005 15:41
> To: Petersson, Mats
> Cc: xen-devel@lists.xensource.com; Tim Freeman; Kate Keahey
> Subject: Re: [Xen-devel] a question about popen() performance on domU
> 
> > See comments below.  
> 
> Thanks Mats. I have more questions about your comments below.
> 
> Xuehai
> 
> >>-----Original Message-----
> >>From: xuehai zhang [mailto:hai@cs.uchicago.edu]
> >>Sent: 24 November 2005 14:02
> >>To: Petersson, Mats
> >>Cc: xen-devel@lists.xensource.com; Tim Freeman; Kate Keahey
> >>Subject: Re: [Xen-devel] a question about popen() 
> performance on domU
> >>
> >>Mats,
> >>
> >>Thanks a lot for the response.
> >>
> >>
> >>>I did have a look at popen, and essentially, it does the
> >>
> >>following [
> >>
> >>>the real code is MUCH more complicated, doing lots of
> >>
> >>open/dup/close
> >>
> >>>on pipes and stuff]:
> >>>if (!fork())
> >>> exec("/bin/sh", "sh", "-c", cmd,
NULL);
> >>
> >>I took a look at the popen source code too yesterday and the above 
> >>lines are the esstential part. A thread at gnu list
> >>(http://lists.gnu.org/archive/html/bug-global/2005-06/msg00001
> >>.html) suggets
> >>popen() might depend on how fast /bin/sh is executed. On both my VM
> >>and the physical machine, the kernel version is 2.6.11, 
> glibc version 
> >>is 2.3.2.ds1-21, and /bin/sh is linked to /bin/bash. I also 
> tried to 
> >>see any difference of the shared libraries used by /bin/sh on both 
> >>machines and found /bin/sh on the physical machine uses 
> libraries from 
> >>/lib/tls while for the VM this directory is disabled.
> >>
> >>VM$ ldd /bin/sh
> >>         libncurses.so.5 => /lib/libncurses.so.5 (0xb7fa7000)
> >>         libdl.so.2 => /lib/libdl.so.2 (0xb7fa3000)
> >>         libc.so.6 => /lib/libc.so.6 (0xb7e70000)
> >>         /lib/ld-.so.2 => /lib/ld-.so.2 (0xb7fea000)
> >>
> >>PHYSICAL$  ldd /bin/sh
> >>         libncurses.so.5 => /lib/libncurses.so.5 (0xb7fa6000)
> >>         libdl.so.2 => /lib/tls/libdl.so.2 (0xb7fa2000)
> >>         libc.so.6 => /lib/tls/libc.so.6 (0xb7e6d000)
> >>         /lib/ld-.so.2 => /lib/ld-.so.2 (0xb7fea000)
> > 
> > 
> > In this particular case, I would think that lib/tls is not 
> a factor, 
> > but it may be worth disabling the tls libraries on the 
> pysical machine 
> > too, just to make sure... [just "mv /lib/tls 
> /lib/tls.disabled" should 
> > do it].
> 
> I don''t think /lib/tls is the factor too. I did rerun the 
> tests with tls disabled on the physical machine and it gave 
> even worse performance for the tests. So, I switched it back.
> 
> > 
> >>>The fork creates another process, which then executes the
/bin/sh,
> >>>which again causes another fork/exec to take place in the 
> effort of 
> >>>executing the actual command given.
> >>>
> >>>So the major component of popen would be fork() and
> >>
> >>execl(), both of
> >>
> >>>which cause, amongst other things, a lot of page-table work and
> >>>task-switching.
> >>>
> >>>Note that popen is implemented in glibc [I took the 2.3.6
> >>
> >>source code
> >>
> >>>from www.gnu.org for my look at this], so there''s no
> >>
> >>difference in the
> >>
> >>>implementation of popen itself - the difference lies in how
> >>
> >>the Linux
> >>
> >>>kernel handles fork() and exec(), but maybe more importantly,
how
> >>>task-switches and page-tables are handled in Linux native
> >>
> >>and Xen-Linux.
> >>
> >>>Because Xen keeps track of the page-tables on top of
> >>
> >>Linux''s handling
> >>
> >>>of page-tables, you get some extra work here. So, it should
> >>
> >>really be
> >>
> >>>slower on Xen than on native Linux.
> >>>[In fact, the question came up not so long ago, why Xen was
SLOWER
> >>>than native Linux on popen (and some others) in a particular 
> >>>benchmark, and the result of that investigation was that
> >>
> >>it''s down to,
> >>
> >>>mainly, task-switching takes longer in Xen.]
> >>
> >>I agree with your explanation about Xen was SLOWER than 
> native Linux 
> >>on popen because of the longer task-switching in Xen. The problem I
> >>met (popen runs faster on Xen VM than the physical machine) looks 
> >>abnormal. I ran several home-made benchmarking programming and used
> >>the "strace" tool to trace the system call performance.
The first
> >>program is to test the performance of both popen and pclose 
> (a loop of 
> >>popen call with a followup pclose call) and the source of 
> the program 
> >>and the strace results are available at 
> >>http://people.cs.uchicago.edu/~hai/tmp/gt2gram/strace-popen/st
> >>race.txt. The results shows the waitpid syscall costs more time on 
> >>physical machine than on the VM (see the usecs/call valuee in the 
> >>following table).
> >>
> >>		% time     seconds  usecs/call     calls    
> >>errors syscall
> >>		------ ----------- ----------- ---------
> >>--------- ----------------
> >>VM:		63.43    0.127900        6395        20         
> >>  waitpid
> >>PHYSICAL
> >>MACHINE:	93.87    0.532498       26625        20         
> >>  waitpid
> >>
> >>waitpid is called by pclose as shown in the glibc source 
> code. So, my 
> >>original post questioning the performance of popen should 
> take pclose 
> >>into consideration too. A more accurate question I should post is, 
> >>popen+pclose executes faster on my VM than my physical machine. The
> >>popen/pclose benchmark I did narrows the problem down to 
> waitpid that 
> >>waitpid somehow is suffering on the physical machine.
> >>So, I did a followup experiment to test the fork and waitpid 
> >>performance on both machines. The program is a loop of fork 
> call with 
> >>a followup waitpid call. The source of the program and the strace 
> >>results are available at 
> >>http://people.cs.uchicago.edu/~hai/tmp/gt2gram/strace-fork/str
> >>ace.txt. The strace results confirm the waitpid costs more 
> time on the 
> >>physical machine (154 usec/call) than the VM (56 usec/call).
> >>However, the program runs faster on the physical machine 
> (not like the 
> >>popen/pclose program) and the results suggest the fork 
> syscall used on 
> >>the VM costs more time than the clone syscall on the 
> physical machine. 
> >>I have a question here, why the physical machine doesn''t
use fork
> >>syscall but the clone syscall for the same program?
> > 
> > 
> > Because it''s using the same source for glibc! glibc says to
use
> > _IO_fork(), which is calling the fork syscall. Clone would 
> probably do 
> > the same thing, but for whatever good or bad reason, the 
> author(s) of 
> > thise code chose to use fork. There may be good reasons, or 
> no reason 
> > at all to do it this way. I couldn''t say. I don''t
think it makes a
> > whole lot of difference if the actual command executed by popen is 
> > actually "doing something", rather than just an empty
"return".
> 
> Do you have any suggestion why the same code uses different 
> syscalls on two machines which have the same kernel and glibc?
That I can''t explain. I guess one possibility is that in some way, the
fork() call gets translated to clone() at some other level. I did a grep
for _IO_fork in the source for glibc, and it comes back as #define
_IO_fork fork . 
> 
> >>>The reason it is not would probably have something to do with
the
> >>>differences in hardware on Linux vs. Xen platforms, perhaps
> >>
> >>the fact
> >>
> >>>that your file-system is a virtual block-device and thus
> >>
> >>lives inside
> >>
> >>>a file that is perhaps better cached or otherwise handled in a 
> >>>different way on the Xen-system.
> >>
> >>Let me describe the hardware context of my VM and physical machine.
> >>The host of my VM and the physical machine I tested against the VM,
> >>are two nodes of a physical cluster with the same hardware 
> >>configuration (Dual Intel PIII 498.799 MHz CPU, 512MB 
> memory, a 4GB HD 
> >>with same partitions). The physical machine is rebooted 
> with "nosmp". 
> >>The VM host  is rebooted into Xen with "nosmp" (Xen
version
> >>information is "Latest
> >>ChangeSet: 2005/05/03 17:30:40 1.1846 
> >>4277a730mvnFSFXrxJpVRNk8hjD4Vg"). Xen dom0 is assigned 96MB 
> memory and 
> >>the VM is the only user domain running on the VM host with 395MB 
> >>memory. Both dom0 and the VM are pinned to CPU 0.
> >>
> >>Yes, the backends of the VM''s VBDs are loopback files in 
> dom0. Three 
> >>loopback files are used to map to three partitions inside 
> of the VM. I 
> >>acutally thought about the possible caching effect of the
VM''s VBD
> >>backends, but not sure how to testify it and compare it with the 
> >>physical machine. Is it possible the Xen has different assurance of
> >>writing back than the physical machine, that is, the data 
> is kept in 
> >>memory longer before is actually written to disk?
> > 
> > 
> > Xen itself doesn''t know ANYTHING about the disk/file where 
> the data for
> > the Dom0 or DomU comes from, so no, Xen would not do that. 
> However, the
> > loopback file-system that is involved in VBD''s would
potentially do
> > things that are different from the actual hardware.
> 
> So, there is possbility that the loopback file-system can do 
> something tricky like caching and 
> results in better performance for applications running inside 
> of the VM?
> 
> > I think you should be able to mount the virtual disk as a 
> "device" on
> > your system. 
> 
> What does "your system" here refer to? Does it mean dom0 or 
> inside of domU?
Your system here referes to "PHYSICAL". > 
> > I don''t know of the top of my head how to do that, but
> > essentially something like this:
> > mount myimage.hdd loop/ -t ext3 [additional parameters may 
> be needed]. 
> > 
> > You could then do "chroot loop/", and perform your tests
there. This
> > should execute the same thing from the same place on the 
> native linux as
> > you would in DomU. 
> > 
> > Now, this may not run faster on native than your original 
> setup, but I
> > wouldn''t be surprised if it does... 
> 
> This is interesting. I will try to run the same tests if I 
> canmount the virtual disk as "device" 
> successfully.
Please share the results... ;-)> 
> Thanks.
> 
> Xuehai
> > 
> >>>Now, I''m not saying that there isn''t a
possibility that
> >>
> >>something is 
> >>
> >>>managed differently in Xen that makes this run faster - I 
> >>
> >>just don''t 
> >>
> >>>really see how that would be likely, since everything that 
> >>
> >>happens in 
> >>
> >>>the system is going to be MORE complicated by the extra 
> >>
> >>layer of Xen 
> >>
> >>>involved.
> >>
> >>>If anyone else has some thoughts on this subject, it would be 
> >>>interesting to hear.
> >>
> >>I agree. But given the VM having same hardware/software 
> >>configuration as the physical machine, it runs faster still 
> >>looks abnormal to me. I wonder if there is any other more 
> >>efficient debugging strategies I can use to investigate it. I 
> >>appreciate if any one has any more suggestions.
> >>
> >>Thanks again.
> >>
> >>Xuehai
> >>
> >>
> >>>>-----Original Message-----
> >>>>From: xen-devel-bounces@lists.xensource.com
> >>>>[mailto:xen-devel-bounces@lists.xensource.com] On Behalf 
> Of xuehai 
> >>>>zhang
> >>>>Sent: 23 November 2005 20:26
> >>>>To: xen-devel@lists.xensource.com
> >>>>Cc: Tim Freeman; Kate Keahey
> >>>>Subject: [Xen-devel] a question about popen() performance
on domU
> >>>>
> >>>>Dear all,
> >>>>When I compared the performance of some application on both
> >>
> >>a Xen domU 
> >>
> >>>>and a standard linux machine (where domU runs on a 
> similar physical 
> >>>>mahine), I notice the application runs faster on the domU 
> >>
> >>than on the 
> >>
> >>>>physical machine.
> >>>>Instrumenting the application code shows the application 
> >>
> >>spends more 
> >>
> >>>>time on popen() calls on domU than on the physical machine.
> >>
> >>I wonder 
> >>
> >>>>if  xenlinux does some special modification of the popen
code to
> >>>>improve its performance than the original Linux popen code?
> >>>>Thanks in advance for your help.
> >>>>Xuehai
> >>>>
> >>>>_______________________________________________
> >>>>Xen-devel mailing list
> >>>>Xen-devel@lists.xensource.com
> >>>>http://lists.xensource.com/xen-devel
> >>>>
> >>>>
> >>>
> >>>
> >>>
> >>
> >>
> > 
> > 
> 
> 
> 

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel

xuehai zhang

2005-Nov-26 00:37 UTC

head link

Re: [Xen-devel] a question about popen() performance on domU

>>waitpid is called by pclose as shown in the glibc source 
>>code. So, my original post questioning the performance of 
>>popen should take pclose into consideration too. A more 
>>accurate question I should post is, popen+pclose executes 
>>faster on my VM than my physical machine. The popen/pclose 
>>benchmark I did narrows the problem down to waitpid that 
>>waitpid somehow is suffering on the physical machine. 
>>So, I did a followup experiment to test the fork and waitpid 
>>performance on both machines. The program is a loop of fork 
>>call with a followup waitpid call. The source of the program 
>>and the strace results are available at 
>>http://people.cs.uchicago.edu/~hai/tmp/gt2gram/strace-fork/str
>>ace.txt. The strace results confirm the waitpid costs more 
>>time on the physical machine (154 usec/call) than the VM (56 
>>usec/call). 
>>However, the program runs faster on the physical machine (not 
>>like the popen/pclose program) and the results suggest the 
>>fork syscall used on the VM costs more time than the clone 
>>syscall on the physical machine. I have a question here, why 
>>the physical machine doesn''t use fork syscall but the clone 
>>syscall for the same program?
> 
> 
> Because it''s using the same source for glibc! glibc says to use
> _IO_fork(), which is calling the fork syscall. Clone would probably do
> the same thing, but for whatever good or bad reason, the author(s) of
> thise code chose to use fork. There may be good reasons, or no reason at
> all to do it this way. I couldn''t say. I don''t think it
makes a whole
> lot of difference if the actual command executed by popen is actually
> "doing something", rather than just an empty "return".
Mats,
I am not very sure about your comment in the last sentence. Are you suggesting
the command passed to
popen should have no big effect on popen''s performance?
Thanks.
Xuehai

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel

Rustam Bhote

2005-Nov-27 05:30 UTC

head link

[Xen-devel] Errors installing Vnet

Hi,

I am attempting to install /tools/vnet. I''ve attempted it from both
stable and unstable versions
of Xen and get the following errors.

Here is what I did
1. Followed the directions in /tools/vnet/00INSTALL. Ran ''make
install'' and got errors.

2. I modified ''Makefile'' which got rid of the errors. 
I ran ''make clean'' and ''make install'' and
then got these errors (which are different from errors
in step #1).
>>>>>>>>>>>>>>>>>>>>>In file included from vnetd.h:22,
                 from vcache.c:39:
../vnet-module/if_varp.h:39: warning: declaration does not declare
anything
In file included from vcache.c:39:
vnetd.h:40: warning: declaration does not declare anything
vcache.c: In function `varp_send'':
vcache.c:105: error: structure has no member named `id''
vcache.c:106: error: structure has no member named `opcode''
vcache.c: In function `vcache_forward_varp'':
vcache.c:506: error: structure has no member named `opcode''
vcache.c: In function `vcache_handle_message'':
vcache.c:614: error: structure has no member named `opcode''
make[1]: *** [vcache.o] Error 1
make[1]: Leaving directory `/usr/src/bk/xen/tools/vnet/vnetd''
make: *** [vnetd] Error 2>>>>>>>>>>>>>>>>>>>>>
3. I tried the unstable version of Xen and get the following errors when running
''make install''
after recomiling the kernel with the required options.
>>>>>>>>>>>>>>>>>>>>>In file included from vnetd.c:118:
/home/rbhote/xen-2.0/tools/vnet/vnet-module/if_etherip.h:36:2: #error
"Please fix
<asm/byteorder.h>"
In file included from vnetd.c:123:
vnetd.h:41: warning: declaration does not declare anything
make[1]: *** [vnetd.o] Error 1
make[1]: Leaving directory `/home/rbhote/xen-2.0/tools/vnet/vnetd''
make: *** [vnetd-all] Error 2>>>>>>>>>>>>>>>>>>>>>

http://lists.xensource.com/archives/html/xen-devel/2005-02/msg00391.html
This is a link that indicates that this is a problem that is not fixed. However
the post is a year
old.

Any ideas would be appreciated.

Thanks,
Rustam

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel

Petersson, Mats

2005-Nov-28 10:01 UTC

head link

RE: [Xen-devel] a question about popen() performance on domU

> > Because it''s using the same source for glibc! glibc says to
use
> > _IO_fork(), which is calling the fork syscall. Clone would 
> probably do 
> > the same thing, but for whatever good or bad reason, the 
> author(s) of 
> > thise code chose to use fork. There may be good reasons, or 
> no reason 
> > at all to do it this way. I couldn''t say. I don''t
think it makes a
> > whole lot of difference if the actual command executed by popen is 
> > actually "doing something", rather than just an empty
"return".
> 
> Mats,
> I am not very sure about your comment in the last sentence. 
> Are you suggesting the command passed to popen should have no 
> big effect on popen''s performance?
No, my point was that clone and fork are very similar, and if you
ACTUALLY do something in the forked/cloned process, the difference
betweent the two process creating mechanisms would be very similar -
however, if you don''t do anything inside the popen, you get to see the
difference. The thing is that popen is meant to spawn a process that
actually does something - at least that''s the general idea. That is why
this sort of microbenchmark that tests a paricular system call is often
quite useless - if you where to spawn of a gcc compile, do you think the
time taken to actually perform popen would be noticable, compared to the
compiling of some kilobytes of source-code [if you use -pipe on gcc I
believe it would use popen to create the next level compile]?

Application benchmarks are much more meaningfull for the end users and
with the right tools can be used to direct the kernel developers to look
at the right areas of the kernel to increase the performance of the
system - which is probably not going to be suboptimisations inside
popen. 

--
Mats> Thanks.
> Xuehai
> 
> 

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel

Maybe Matching Threads

Search for more reasonably related threads

Xen devel - Nov 2005 - a question about popen() performance on domU

[Xen-devel] a question about popen() performance on domU

RE: [Xen-devel] a question about popen() performance on domU

Re: [Xen-devel] a question about popen() performance on domU

RE: [Xen-devel] a question about popen() performance on domU

Re: [Xen-devel] a question about popen() performance on domU

RE: [Xen-devel] a question about popen() performance on domU

Re: [Xen-devel] a question about popen() performance on domU

[Xen-devel] Errors installing Vnet

RE: [Xen-devel] a question about popen() performance on domU

Maybe Matching Threads