thr3ads.net - Xen users - [Xen-users] Not able to get eth0 up on domU. [Oct 2005]

If this information is useful, please help other people find it:
Share via:

Atul Dambalkar

2005-Oct-18 00:41 UTC

[Xen-users] Not able to get eth0 up on domU.

I am using ttylinux-xen file system image a a loopback device for the
domain. I am mostly using the default configuration. I am not able to
get networking on the domU. Are kernel "vmlinuz-2.6-xenU" as well as
"2.6.11.12-xen0" both compiled w/o loadable module support? I guess it
fails when it tries to initialize the iptables on the domU when it tries
to do "modprobe". I do have connectivity on dom0. Am I doing anything
wrong? 
 
-Atul
 
Here are all the details about domU:
 
==============domain configuration file=============kernel =
"/boot/vmlinuz-2.6-xenU"
memory = 64
name = "ttylinux"
nics=1
vif = [ ''mac=aa:01:02:05:0B:11, bridge=xen-br0'' ]
disk = [ ''phy:/dev/loop0,sda1,w'' ]
dhcp="dhcp"
root = "/dev/sda1 ro"
============================================ 
 
========== Output of ''ifconfig -a'' on "ttylinux"
domain
===================================eth0      Link encap:Ethernet  HWaddr
AA:01:02:05:0B:11
          BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
 
lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
=========================================== 
Error message while starting the domain "ttylinux"

===========================================Running local start scripts.
Starting basic firewall: modprobe: could not parse modules.dep
 
iptables v1.2.11: can''t initialize iptables table `filter'':
iptables
who? (do you need to insmod?)
Perhaps iptables or your kernel needs to be upgraded.
modprobe: could not parse modules.dep
============================================== 
 
Here are details about the dom0:
 
# uname -a
Linux localhost.localdomain 2.6.11.12-xen0 #1 Thu Aug 4 00:45:12 BST
2005 i686 i686 i386 GNU/Linux

If I try to set iptable rules on the Host OS I get following:
=============================================iptables -A FORWARD -m physdev
--physdev-in eth0 --physdev-out ''!'' eth0
-j ACCEPT
modprobe: QM_MODULES: Function not implemented
 
modprobe: QM_MODULES: Function not implemented
 
modprobe: Can''t locate module ip_tables
iptables v1.2.8: can''t initialize iptables table `filter'':
iptables who?
(do you need to insmod?)
Perhaps iptables or your kernel needs to be upgraded.
================================================= 
File: xend.log (partial)
======================================VIRTUAL MEMORY ARRANGEMENT:
 Loaded kernel: c0100000->c033bb84
 Init. ramdisk: c033c000->c033c000
 Phys-Mach map: c033c000->c034c000
 Page tables:   c034c000->c034e000
 Start info:    c034e000->c034f000
 Boot stack:    c034f000->c0350000
 TOTAL:         c0000000->c0400000
 ENTRY ADDRESS: c0100000
vif-bridge up vif=vif35.0 domain=ttylinux mac=aa:01:02:05:0b:11
bridge=xen-br0
recv_fe_driver_status> {''status'': 1}
 
recv_fe_driver_status>
 
recv_fe_interface_connect {''tx_shmem_frame'': 4571,
''rx_shmem_frame'':
4570, ''handle'': 0}
======================================== 
 
Output of ifconfig on dom0:
=================================================eth0      Link encap:Ethernet 
HWaddr 00:0E:0C:51:AC:EE
          inet addr:192.168.1.100  Bcast:192.168.1.255
Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:9288 errors:0 dropped:0 overruns:0 frame:0
          TX packets:16448 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:1737109 (1.6 Mb)  TX bytes:1389582 (1.3 Mb)
          Base address:0xdf20 Memory:fcea0000-fcec0000 
 
eth1      Link encap:Ethernet  HWaddr 00:0F:1F:80:4C:7C  
          BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)
          Base address:0xdf40 Memory:fcee0000-fcf00000 

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:20332 errors:0 dropped:0 overruns:0 frame:0
          TX packets:20332 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:1850852 (1.7 Mb)  TX bytes:1850852 (1.7 Mb)
 
vif7.0    Link encap:Ethernet  HWaddr FE:FF:FF:FF:FF:FF  
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:8 errors:0 dropped:111 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:0 (0.0 b)  TX bytes:538 (538.0 b)
 
xen-br0   Link encap:Ethernet  HWaddr 00:0E:0C:51:AC:EE  
          inet addr:192.168.1.100  Bcast:192.168.1.255
Mask:255.255.255.255
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:7993 errors:0 dropped:0 overruns:0 frame:0
          TX packets:14742 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:895909 (874.9 Kb)  TX bytes:1152226 (1.0 Mb)
 
========================================================== 


_______________________________________________
Xen-users mailing list
Xen-users@lists.xensource.com
http://lists.xensource.com/xen-users

benjamin

2005-Oct-18 14:44 UTC

head link

Re: [Xen-users] Not able to get eth0 up on domU.

On 10/18/05, Atul Dambalkar <atul_dambalkar@symantec.com>
wrote:>
> I am using ttylinux-xen file system image a a loopback device for the
> domain. I am mostly using the default configuration. I am not able to get
> networking on the domU. Are kernel "vmlinuz-2.6-xenU" as well as
"
> 2.6.11.12-xen0" both compiled w/o loadable module support? I guess it
> fails when it tries to initialize the iptables on the domU when it tries to
> do "modprobe".
>

Greping for module on Cambrige complied domU config gives me

grep -ir module /boot/config-2.6.11.10-xenU
# Loadable module support
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set

As for iptables(if you need) , you need to re-compile domU kernel and copy
/lib/modules/<the righ domU kernel version> into the domU''s root
fs.







--
benjamin rualthanzauva


_______________________________________________
Xen-users mailing list
Xen-users@lists.xensource.com
http://lists.xensource.com/xen-users

Sharath Babu

2005-Oct-18 16:12 UTC

head link

Re: [Xen-users] Not able to get eth0 up on domU.

Try static IP address and netmask in domU config.

On 10/18/05, benjamin <benjaminrtz@gmail.com>
wrote:>
>
>
> On 10/18/05, Atul Dambalkar <atul_dambalkar@symantec.com> wrote:
> >
> > I am using ttylinux-xen file system image a a loopback device for the
> > domain. I am mostly using the default configuration. I am not able to
get
> > networking on the domU. Are kernel "vmlinuz-2.6-xenU" as
well as "
> > 2.6.11.12-xen0" both compiled w/o loadable module support? I
guess it
> > fails when it tries to initialize the iptables on the domU when it
tries to
> > do "modprobe".
> >
>
>
> Greping for module on Cambrige complied domU config gives me
>
> grep -ir module /boot/config-2.6.11.10-xenU
> # Loadable module support
> CONFIG_MODULES=y
> CONFIG_MODULE_UNLOAD=y
> # CONFIG_MODULE_FORCE_UNLOAD is not set
> # CONFIG_MODULE_SRCVERSION_ALL is not set
>
> As for iptables(if you need) , you need to re-compile domU kernel and copy
> /lib/modules/<the righ domU kernel version> into the domU''s
root fs.
>
>
>
>
>
>
>
> --
> benjamin rualthanzauva
>
> _______________________________________________
> Xen-users mailing list
> Xen-users@lists.xensource.com
> http://lists.xensource.com/xen-users
>
>

_______________________________________________
Xen-users mailing list
Xen-users@lists.xensource.com
http://lists.xensource.com/xen-users

Atul Dambalkar

2005-Oct-18 18:24 UTC

head link

RE: [Xen-users] Not able to get eth0 up on domU.

I want to use dhcp for now rather than static ip. I will try it first by
not having iptables.
 
Thanks for your inputs.
 
-Atul


  _____  

	From: Sharath Babu [mailto:sharathx@gmail.com] 
	Sent: Tuesday, October 18, 2005 9:13 AM
	To: benjamin; Atul Dambalkar; Xen-users@lists.xensource.com
	Subject: Re: [Xen-users] Not able to get eth0 up on domU.
	
	
	Try static IP address and netmask in domU config.
	
	
	On 10/18/05, benjamin <benjaminrtz@gmail.com> wrote: 



		On 10/18/05, Atul Dambalkar
<atul_dambalkar@symantec.com> wrote: 

			I am using ttylinux-xen file system image a a
loopback device for the domain. I am mostly using the default
configuration. I am not able to get networking on the domU. Are kernel
"vmlinuz-2.6-xenU" as well as "2.6.11.12-xen0" both compiled
w/o
loadable module support? I guess it fails when it tries to initialize
the iptables on the domU when it tries to do "modprobe". 



		Greping for module on  Cambrige complied domU config
gives me 
		
		grep -ir module  /boot/config-2.6.11.10-xenU
		# Loadable module support
		CONFIG_MODULES=y
		CONFIG_MODULE_UNLOAD=y
		# CONFIG_MODULE_FORCE_UNLOAD is not set
		# CONFIG_MODULE_SRCVERSION_ALL is not set
		
		As for iptables(if you need) , you need to re-compile
domU kernel  and copy  /lib/modules/<the righ domU kernel version>  into
the domU''s root fs.
		
		
		
		




		-- 
		benjamin rualthanzauva
		
		_______________________________________________
		Xen-users mailing list
		Xen-users@lists.xensource.com
		http://lists.xensource.com/xen-users
		
		




_______________________________________________
Xen-users mailing list
Xen-users@lists.xensource.com
http://lists.xensource.com/xen-users

Reasonably Related Threads

Search for more possibly parallel threads

Xen users - Oct 2005 - Not able to get eth0 up on domU.

[Xen-users] Not able to get eth0 up on domU.

Re: [Xen-users] Not able to get eth0 up on domU.

Re: [Xen-users] Not able to get eth0 up on domU.

RE: [Xen-users] Not able to get eth0 up on domU.

Reasonably Related Threads