I've tried several times to resize one of my ocfs volumes[see emcpowere1
below]
I'm on the latest [prod] version of ocfs/ocfs-tools as of 3pm EST on
18JUL04.
Per instructions...
Take down db, unmount all ocfs drives, use ' tuneocfs -F -S 100G
/dev/emcpowere1 '
Supposedly this should work, but I get get....
The size specified, 100G, is larger than the device size, 59G.
Aborting.
What am I doing wrong?
######### df-h ########
Filesystem Size Used Avail Use% Mounted on
/dev/sda2 12G 9.5G 2.4G 80% /
/dev/sda10 1011M 40M 920M 5% /home
/dev/sda3 9.1G 3.6G 5.0G 42% /opt/oracle
none 3.8G 0 3.8G 0% /dev/shm
/dev/sda9 1.0G 33M 949M 4% /tmp
/dev/sda5 2.1G 91M 1.8G 5% /var
/dev/emcpowera1 1022M 173M 849M 17% /u01
/dev/emcpowerd1 10G 2.2G 7.8G 22% /u04
/dev/emcpowere1 60G 59G 1.6G 98% /u06
/dev/emcpowerf1 133G 86G 47G 65% /u07
/dev/emcpowerg1 5.0G 715M 4.2G 14% /u02
/dev/emcpowerh1 5.0G 940M 4.0G 19% /u03
/dev/emcpoweri1 133G 61G 72G 46% /u08
/dev/emcpowerj1 10G 1.1G 8.9G 11% /u05
######### fdisk -l /dev/emcpowere #####
Disk /dev/emcpowere: 64 heads, 32 sectors, 102400 cylinders
Units = cylinders of 2048 * 512 bytes
Device Boot Start End Blocks Id System
/dev/emcpowere1 1 61440 62914544 83 Linux
|||||||||||||||||||||||||||
P. Clarke Thomas
SysAdmin
Houghton International
http://www.houghtonintl.com
```````````````````````````
With sufficient thrust, pigs fly just fine. - RFC 1925
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://oss.oracle.com/pipermail/ocfs-users/attachments/20040718/2a7dd9cb/attachment.htm
Resize ocfs....?Have you resized your physical partition? Does it have the 100Gb
for the filesystem?
Based on your description, your physical partition has only 59Gb. The filesystem
size is limited by the partition size. If you have some utility that allows you
to dynamic resize your physical partition, then good for you. If not, you have
to take a backup, re-create the partition with 100Gb, reformat and restore the
backup. In this case, better creating additional datafiles for the tablespace(s)
in some other ocfs filesystem that has available space.
Regards,
Marcos Eduardo Matsunaga
Oracle Corporation
Corporate Architecture - Linux
5955 TG Lee Blvd Email : Marcos.Matsunaga@oracle.com
Orlando, FL 32822 Phone : (407)458-6453
Fax : (407)851-9093
A crisis is when you can't say "Let's forget the whole thing."
---------------------------------------------------------------------------------------
The statements and opinions expressed here are my own
and do not necessarily represent those of Oracle Corporation.
----- Original Message -----
From: ml.ocfs@houghtonintl.com
To: ocfs-users@oss.oracle.com
Sent: Sunday, July 18, 2004 4:12 PM
Subject: [Ocfs-users] Resize ocfs....?
I've tried several times to resize one of my ocfs volumes[see emcpowere1
below]
I'm on the latest [prod] version of ocfs/ocfs-tools as of 3pm EST on
18JUL04.
Per instructions...
Take down db, unmount all ocfs drives, use ' tuneocfs -F -S 100G
/dev/emcpowere1 '
Supposedly this should work, but I get get....
The size specified, 100G, is larger than the device size, 59G.
Aborting.
What am I doing wrong?
######### df-h ########
Filesystem Size Used Avail Use% Mounted on
/dev/sda2 12G 9.5G 2.4G 80% /
/dev/sda10 1011M 40M 920M 5% /home
/dev/sda3 9.1G 3.6G 5.0G 42% /opt/oracle
none 3.8G 0 3.8G 0% /dev/shm
/dev/sda9 1.0G 33M 949M 4% /tmp
/dev/sda5 2.1G 91M 1.8G 5% /var
/dev/emcpowera1 1022M 173M 849M 17% /u01
/dev/emcpowerd1 10G 2.2G 7.8G 22% /u04
/dev/emcpowere1 60G 59G 1.6G 98% /u06
/dev/emcpowerf1 133G 86G 47G 65% /u07
/dev/emcpowerg1 5.0G 715M 4.2G 14% /u02
/dev/emcpowerh1 5.0G 940M 4.0G 19% /u03
/dev/emcpoweri1 133G 61G 72G 46% /u08
/dev/emcpowerj1 10G 1.1G 8.9G 11% /u05
######### fdisk -l /dev/emcpowere #####
Disk /dev/emcpowere: 64 heads, 32 sectors, 102400 cylinders
Units = cylinders of 2048 * 512 bytes
Device Boot Start End Blocks Id System
/dev/emcpowere1 1 61440 62914544 83 Linux
|||||||||||||||||||||||||||
P. Clarke Thomas
SysAdmin
Houghton International
http://www.houghtonintl.com
```````````````````````````
With sufficient thrust, pigs fly just fine. - RFC 1925
------------------------------------------------------------------------------
_______________________________________________
Ocfs-users mailing list
Ocfs-users@oss.oracle.com
http://oss.oracle.com/mailman/listinfo/ocfs-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://oss.oracle.com/pipermail/ocfs-users/attachments/20040719/47da85ad/attachment.htm
Resize ocfs....?Well,
When I talked about dynamically expanding the partition, and that partition is
in a clustered drive, the utility has to be cluster aware.
In this case, if you use parted or fdisk (they are not cluster aware), you would
have to unload/load the HBA driver (easiest way) on all other nodes in order to
see the changes that nodeA made.
As rule for any operation that may involve loss of data, don't forget to get
a good backup before performing any changes.
Regards,
Marcos Eduardo Matsunaga
Oracle Corporation
Corporate Architecture - Linux
5955 TG Lee Blvd Email : Marcos.Matsunaga@oracle.com
Orlando, FL 32822 Phone : (407)458-6453
Fax : (407)851-9093
A crisis is when you can't say "Let's forget the whole thing."
---------------------------------------------------------------------------------------
The statements and opinions expressed here are my own
and do not necessarily represent those of Oracle Corporation.
----- Original Message -----
From: Clarke@houghtonintl.com
To: Marcos.Matsunaga@oracle.com ; ocfs-users@oss.oracle.com
Sent: Monday, July 19, 2004 4:46 PM
Subject: RE: [Ocfs-users] Resize ocfs....?
ok, will look into. sort of off topic....
as the parition is located on a clustered drive.
if I dynamically expand the partition on NodeA. do I need to change any files
on my other nodes?
or should they dynamically determine the partition size avail?
------------------------------------------------------------------------------
From: Marcos Matsunaga [mailto:Marcos.Matsunaga@oracle.com]
Sent: Monday, 19 July, 2004 00:01
To: ml.ocfs@houghtonintl.com; ocfs-users@oss.oracle.com
Subject: Re: [Ocfs-users] Resize ocfs....?
Have you resized your physical partition? Does it have the 100Gb for the
filesystem?
Based on your description, your physical partition has only 59Gb. The
filesystem size is limited by the partition size. If you have some utility that
allows you to dynamic resize your physical partition, then good for you. If not,
you have to take a backup, re-create the partition with 100Gb, reformat and
restore the backup. In this case, better creating additional datafiles for the
tablespace(s) in some other ocfs filesystem that has available space.
Regards,
Marcos Eduardo Matsunaga
Oracle Corporation
Corporate Architecture - Linux
5955 TG Lee Blvd Email : Marcos.Matsunaga@oracle.com
Orlando, FL 32822 Phone : (407)458-6453
Fax : (407)851-9093
A crisis is when you can't say "Let's forget the whole
thing."
---------------------------------------------------------------------------------------
The statements and opinions expressed here are my own
and do not necessarily represent those of Oracle Corporation.
----- Original Message -----
From: ml.ocfs@houghtonintl.com
To: ocfs-users@oss.oracle.com
Sent: Sunday, July 18, 2004 4:12 PM
Subject: [Ocfs-users] Resize ocfs....?
I've tried several times to resize one of my ocfs volumes[see emcpowere1
below]
I'm on the latest [prod] version of ocfs/ocfs-tools as of 3pm EST on
18JUL04.
Per instructions...
Take down db, unmount all ocfs drives, use ' tuneocfs -F -S 100G
/dev/emcpowere1 '
Supposedly this should work, but I get get....
The size specified, 100G, is larger than the device size, 59G.
Aborting.
What am I doing wrong?
######### df-h ########
Filesystem Size Used Avail Use% Mounted on
/dev/sda2 12G 9.5G 2.4G 80% /
/dev/sda10 1011M 40M 920M 5% /home
/dev/sda3 9.1G 3.6G 5.0G 42% /opt/oracle
none 3.8G 0 3.8G 0% /dev/shm
/dev/sda9 1.0G 33M 949M 4% /tmp
/dev/sda5 2.1G 91M 1.8G 5% /var
/dev/emcpowera1 1022M 173M 849M 17% /u01
/dev/emcpowerd1 10G 2.2G 7.8G 22% /u04
/dev/emcpowere1 60G 59G 1.6G 98% /u06
/dev/emcpowerf1 133G 86G 47G 65% /u07
/dev/emcpowerg1 5.0G 715M 4.2G 14% /u02
/dev/emcpowerh1 5.0G 940M 4.0G 19% /u03
/dev/emcpoweri1 133G 61G 72G 46% /u08
/dev/emcpowerj1 10G 1.1G 8.9G 11% /u05
######### fdisk -l /dev/emcpowere #####
Disk /dev/emcpowere: 64 heads, 32 sectors, 102400 cylinders
Units = cylinders of 2048 * 512 bytes
Device Boot Start End Blocks Id System
/dev/emcpowere1 1 61440 62914544 83 Linux
|||||||||||||||||||||||||||
P. Clarke Thomas
SysAdmin
Houghton International
http://www.houghtonintl.com
```````````````````````````
With sufficient thrust, pigs fly just fine. - RFC 1925
----------------------------------------------------------------------------
_______________________________________________
Ocfs-users mailing list
Ocfs-users@oss.oracle.com
http://oss.oracle.com/mailman/listinfo/ocfs-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://oss.oracle.com/pipermail/ocfs-users/attachments/20040719/2d839343/attachment.htm
Have you tried using the META LUN feature on your CX series to dynamically expand the LUN. Dont know if that would work in your case. Raj On Sun, 18 Jul 2004 16:12:46 -0400, ml.ocfs@houghtonintl.com <ml.ocfs@houghtonintl.com> wrote:> > > > > > > > > > > > I've tried several times to resize one of my ocfs volumes[see emcpowere1 below] > > I'm on the latest [prod] version of ocfs/ocfs-tools as of 3pm EST on 18JUL04. > > Per instructions... > > Take down db, unmount all ocfs drives, use ' tuneocfs -F -S 100G /dev/emcpowere1 ' > > > > > Supposedly this should work, but I get get.... > > The size specified, 100G, is larger than the device size, 59G. > > Aborting. > > > > > > > What am I doing wrong? > > > > > > > ######### df-h ######## > > Filesystem Size Used Avail Use% Mounted on > > /dev/sda2 12G 9.5G 2.4G 80% / > > /dev/sda10 1011M 40M 920M 5% /home > > /dev/sda3 9.1G 3.6G 5.0G 42% /opt/oracle > > none 3.8G 0 3.8G 0% /dev/shm > > /dev/sda9 1.0G 33M 949M 4% /tmp > > /dev/sda5 2.1G 91M 1.8G 5% /var > > /dev/emcpowera1 1022M 173M 849M 17% /u01 > > /dev/emcpowerd1 10G 2.2G 7.8G 22% /u04 > > /dev/emcpowere1 60G 59G 1.6G 98% /u06 > > /dev/emcpowerf1 133G 86G 47G 65% /u07 > > /dev/emcpowerg1 5.0G 715M 4.2G 14% /u02 > > /dev/emcpowerh1 5.0G 940M 4.0G 19% /u03 > > /dev/emcpoweri1 133G 61G 72G 46% /u08 > > /dev/emcpowerj1 10G 1.1G 8.9G 11% /u05 > > > > > ######### fdisk -l /dev/emcpowere ##### > > Disk /dev/emcpowere: 64 heads, 32 sectors, 102400 cylinders > > Units = cylinders of 2048 * 512 bytes > > > > > Device Boot Start End Blocks Id System > > /dev/emcpowere1 1 61440 62914544 83 Linux > > > > > > > > > ||||||||||||||||||||||||||| > > P. Clarke Thomas > > SysAdmin > > Houghton International > > http://www.houghtonintl.com > > ``````````````````````````` > > With sufficient thrust, pigs fly just fine. - RFC 1925 > > > > > >
yes using metaluns,
drive expanded
_____
From: Kendall, Kim [mailto:Kim_Kendall@inter-tel.com]
Sent: Sunday, 18 July, 2004 23:18
To: ml.ocfs@houghtonintl.com
Subject: RE: [Ocfs-users] Resize ocfs....?
The volume has to have been expanded on the array before doing this as well
(using MetaLUN's). But that is the correct command except the device is
usually /dev/sdX.
-----Original Message-----
From: ocfs-users-bounces@oss.oracle.com
[mailto:ocfs-users-bounces@oss.oracle.com] On Behalf Of ml.ocfs@houghtonintl.com
Sent: Sunday, July 18, 2004 1:13 PM
To: ocfs-users@oss.oracle.com
Subject: [Ocfs-users] Resize ocfs....?
I've tried several times to resize one of my ocfs volumes[see emcpowere1
below]
I'm on the latest [prod] version of ocfs/ocfs-tools as of 3pm EST on
18JUL04.
Per instructions...
Take down db, unmount all ocfs drives, use ' tuneocfs -F -S 100G
/dev/emcpowere1 '
Supposedly this should work, but I get get....
The size specified, 100G, is larger than the device size, 59G.
Aborting.
What am I doing wrong?
######### df-h ########
Filesystem Size Used Avail Use% Mounted on
/dev/sda2 12G 9.5G 2.4G 80% /
/dev/sda10 1011M 40M 920M 5% /home
/dev/sda3 9.1G 3.6G 5.0G 42% /opt/oracle
none 3.8G 0 3.8G 0% /dev/shm
/dev/sda9 1.0G 33M 949M 4% /tmp
/dev/sda5 2.1G 91M 1.8G 5% /var
/dev/emcpowera1 1022M 173M 849M 17% /u01
/dev/emcpowerd1 10G 2.2G 7.8G 22% /u04
/dev/emcpowere1 60G 59G 1.6G 98% /u06
/dev/emcpowerf1 133G 86G 47G 65% /u07
/dev/emcpowerg1 5.0G 715M 4.2G 14% /u02
/dev/emcpowerh1 5.0G 940M 4.0G 19% /u03
/dev/emcpoweri1 133G 61G 72G 46% /u08
/dev/emcpowerj1 10G 1.1G 8.9G 11% /u05
######### fdisk -l /dev/emcpowere #####
Disk /dev/emcpowere: 64 heads, 32 sectors, 102400 cylinders
Units = cylinders of 2048 * 512 bytes
Device Boot Start End Blocks Id System
/dev/emcpowere1 1 61440 62914544 83 Linux
|||||||||||||||||||||||||||
P. Clarke Thomas
SysAdmin
Houghton International
http://www.houghtonintl.com <http://www.houghtonintl.com>
```````````````````````````
With sufficient thrust, pigs fly just fine. - RFC 1925
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://oss.oracle.com/pipermail/ocfs-users/attachments/20040719/0429cf1e/attachment-0001.htm
ok, will look into. sort of off topic....
as the parition is located on a clustered drive.
if I dynamically expand the partition on NodeA. do I need to change any files
on my other nodes?
or should they dynamically determine the partition size avail?
_____
From: Marcos Matsunaga [mailto:Marcos.Matsunaga@oracle.com]
Sent: Monday, 19 July, 2004 00:01
To: ml.ocfs@houghtonintl.com; ocfs-users@oss.oracle.com
Subject: Re: [Ocfs-users] Resize ocfs....?
Have you resized your physical partition? Does it have the 100Gb for the
filesystem?
Based on your description, your physical partition has only 59Gb. The filesystem
size is limited by the partition size. If you have some utility that allows you
to dynamic resize your physical partition, then good for you. If not, you have
to take a backup, re-create the partition with 100Gb, reformat and restore the
backup. In this case, better creating additional datafiles for the tablespace(s)
in some other ocfs filesystem that has available space.
Regards,
Marcos Eduardo Matsunaga
Oracle Corporation
Corporate Architecture - Linux
5955 TG Lee Blvd Email : Marcos.Matsunaga@oracle.com
<mailto:Marcos.Matsunaga@oracle.com>
Orlando, FL 32822 Phone : (407)458-6453
Fax : (407)851-9093
A crisis is when you can't say "Let's forget the whole thing."
---------------------------------------------------------------------------------------
The statements and opinions expressed here are my own
and do not necessarily represent those of Oracle Corporation.
----- Original Message -----
From: ml.ocfs@houghtonintl.com <mailto:ml.ocfs@houghtonintl.com>
To: ocfs-users@oss.oracle.com <mailto:ocfs-users@oss.oracle.com>
Sent: Sunday, July 18, 2004 4:12 PM
Subject: [Ocfs-users] Resize ocfs....?
I've tried several times to resize one of my ocfs volumes[see emcpowere1
below]
I'm on the latest [prod] version of ocfs/ocfs-tools as of 3pm EST on
18JUL04.
Per instructions...
Take down db, unmount all ocfs drives, use ' tuneocfs -F -S 100G
/dev/emcpowere1 '
Supposedly this should work, but I get get....
The size specified, 100G, is larger than the device size, 59G.
Aborting.
What am I doing wrong?
######### df-h ########
Filesystem Size Used Avail Use% Mounted on
/dev/sda2 12G 9.5G 2.4G 80% /
/dev/sda10 1011M 40M 920M 5% /home
/dev/sda3 9.1G 3.6G 5.0G 42% /opt/oracle
none 3.8G 0 3.8G 0% /dev/shm
/dev/sda9 1.0G 33M 949M 4% /tmp
/dev/sda5 2.1G 91M 1.8G 5% /var
/dev/emcpowera1 1022M 173M 849M 17% /u01
/dev/emcpowerd1 10G 2.2G 7.8G 22% /u04
/dev/emcpowere1 60G 59G 1.6G 98% /u06
/dev/emcpowerf1 133G 86G 47G 65% /u07
/dev/emcpowerg1 5.0G 715M 4.2G 14% /u02
/dev/emcpowerh1 5.0G 940M 4.0G 19% /u03
/dev/emcpoweri1 133G 61G 72G 46% /u08
/dev/emcpowerj1 10G 1.1G 8.9G 11% /u05
######### fdisk -l /dev/emcpowere #####
Disk /dev/emcpowere: 64 heads, 32 sectors, 102400 cylinders
Units = cylinders of 2048 * 512 bytes
Device Boot Start End Blocks Id System
/dev/emcpowere1 1 61440 62914544 83 Linux
|||||||||||||||||||||||||||
P. Clarke Thomas
SysAdmin
Houghton International
http://www.houghtonintl.com <http://www.houghtonintl.com>
```````````````````````````
With sufficient thrust, pigs fly just fine. - RFC 1925
_____
_______________________________________________
Ocfs-users mailing list
Ocfs-users@oss.oracle.com
http://oss.oracle.com/mailman/listinfo/ocfs-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://oss.oracle.com/pipermail/ocfs-users/attachments/20040719/3971f18d/attachment-0001.htm
should I have any problems doing this w/ GNU parted[
http://www.gnu.org/software/parted/parted.html ]?
_____
From: Marcos Matsunaga [mailto:Marcos.Matsunaga@oracle.com]
Sent: Monday, 19 July, 2004 00:01
To: ml.ocfs@houghtonintl.com; ocfs-users@oss.oracle.com
Subject: Re: [Ocfs-users] Resize ocfs....?
Have you resized your physical partition? Does it have the 100Gb for the
filesystem?
Based on your description, your physical partition has only 59Gb. The filesystem
size is limited by the partition size. If you have some utility that allows you
to dynamic resize your physical partition, then good for you. If not, you have
to take a backup, re-create the partition with 100Gb, reformat and restore the
backup. In this case, better creating additional datafiles for the tablespace(s)
in some other ocfs filesystem that has available space.
Regards,
Marcos Eduardo Matsunaga
Oracle Corporation
Corporate Architecture - Linux
5955 TG Lee Blvd Email : Marcos.Matsunaga@oracle.com
<mailto:Marcos.Matsunaga@oracle.com>
Orlando, FL 32822 Phone : (407)458-6453
Fax : (407)851-9093
A crisis is when you can't say "Let's forget the whole thing."
---------------------------------------------------------------------------------------
The statements and opinions expressed here are my own
and do not necessarily represent those of Oracle Corporation.
----- Original Message -----
From: ml.ocfs@houghtonintl.com <mailto:ml.ocfs@houghtonintl.com>
To: ocfs-users@oss.oracle.com <mailto:ocfs-users@oss.oracle.com>
Sent: Sunday, July 18, 2004 4:12 PM
Subject: [Ocfs-users] Resize ocfs....?
I've tried several times to resize one of my ocfs volumes[see emcpowere1
below]
I'm on the latest [prod] version of ocfs/ocfs-tools as of 3pm EST on
18JUL04.
Per instructions...
Take down db, unmount all ocfs drives, use ' tuneocfs -F -S 100G
/dev/emcpowere1 '
Supposedly this should work, but I get get....
The size specified, 100G, is larger than the device size, 59G.
Aborting.
What am I doing wrong?
######### df-h ########
Filesystem Size Used Avail Use% Mounted on
/dev/sda2 12G 9.5G 2.4G 80% /
/dev/sda10 1011M 40M 920M 5% /home
/dev/sda3 9.1G 3.6G 5.0G 42% /opt/oracle
none 3.8G 0 3.8G 0% /dev/shm
/dev/sda9 1.0G 33M 949M 4% /tmp
/dev/sda5 2.1G 91M 1.8G 5% /var
/dev/emcpowera1 1022M 173M 849M 17% /u01
/dev/emcpowerd1 10G 2.2G 7.8G 22% /u04
/dev/emcpowere1 60G 59G 1.6G 98% /u06
/dev/emcpowerf1 133G 86G 47G 65% /u07
/dev/emcpowerg1 5.0G 715M 4.2G 14% /u02
/dev/emcpowerh1 5.0G 940M 4.0G 19% /u03
/dev/emcpoweri1 133G 61G 72G 46% /u08
/dev/emcpowerj1 10G 1.1G 8.9G 11% /u05
######### fdisk -l /dev/emcpowere #####
Disk /dev/emcpowere: 64 heads, 32 sectors, 102400 cylinders
Units = cylinders of 2048 * 512 bytes
Device Boot Start End Blocks Id System
/dev/emcpowere1 1 61440 62914544 83 Linux
|||||||||||||||||||||||||||
P. Clarke Thomas
SysAdmin
Houghton International
http://www.houghtonintl.com <http://www.houghtonintl.com>
```````````````````````````
With sufficient thrust, pigs fly just fine. - RFC 1925
_____
_______________________________________________
Ocfs-users mailing list
Ocfs-users@oss.oracle.com
http://oss.oracle.com/mailman/listinfo/ocfs-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://oss.oracle.com/pipermail/ocfs-users/attachments/20040719/4cfcf7a9/attachment-0001.htm
Yes, the metalun expands the drive size. The drive now shows 100G. -----Original Message----- From: Raj [mailto:sanstorage@gmail.com] Sent: Monday, 19 July, 2004 23:51 To: ml.ocfs@houghtonintl.com Cc: ocfs-users@oss.oracle.com Subject: Re: [Ocfs-users] Resize ocfs....? Have you tried using the META LUN feature on your CX series to dynamically expand the LUN. Dont know if that would work in your case. Raj On Sun, 18 Jul 2004 16:12:46 -0400, ml.ocfs@houghtonintl.com <ml.ocfs@houghtonintl.com> wrote:> > > > > > > > > > > > I've tried several times to resize one of my ocfs volumes[see > emcpowere1 below] > > I'm on the latest [prod] version of ocfs/ocfs-tools as of 3pm EST on 18JUL04. > > Per instructions... > > Take down db, unmount all ocfs drives, use ' tuneocfs -F -S 100G /dev/emcpowere1 ' > > > > > Supposedly this should work, but I get get.... > > The size specified, 100G, is larger than the device size, 59G. > > Aborting. > > > > > > > What am I doing wrong? > > > > > > > ######### df-h ######## > > Filesystem Size Used Avail Use% Mounted on > > /dev/sda2 12G 9.5G 2.4G 80% / > > /dev/sda10 1011M 40M 920M 5% /home > > /dev/sda3 9.1G 3.6G 5.0G 42% /opt/oracle > > none 3.8G 0 3.8G 0% /dev/shm > > /dev/sda9 1.0G 33M 949M 4% /tmp > > /dev/sda5 2.1G 91M 1.8G 5% /var > > /dev/emcpowera1 1022M 173M 849M 17% /u01 > > /dev/emcpowerd1 10G 2.2G 7.8G 22% /u04 > > /dev/emcpowere1 60G 59G 1.6G 98% /u06 > > /dev/emcpowerf1 133G 86G 47G 65% /u07 > > /dev/emcpowerg1 5.0G 715M 4.2G 14% /u02 > > /dev/emcpowerh1 5.0G 940M 4.0G 19% /u03 > > /dev/emcpoweri1 133G 61G 72G 46% /u08 > > /dev/emcpowerj1 10G 1.1G 8.9G 11% /u05 > > > > > ######### fdisk -l /dev/emcpowere ##### > > Disk /dev/emcpowere: 64 heads, 32 sectors, 102400 cylinders > > Units = cylinders of 2048 * 512 bytes > > > > > Device Boot Start End Blocks Id System > > /dev/emcpowere1 1 61440 62914544 83 Linux > > > > > > > > > ||||||||||||||||||||||||||| > > P. Clarke Thomas > > SysAdmin > > Houghton International > > http://www.houghtonintl.com > > ``````````````````````````` > > With sufficient thrust, pigs fly just fine. - RFC 1925 > > > > > >-------------- next part -------------- An HTML attachment was scrubbed... URL: http://oss.oracle.com/pipermail/ocfs-users/attachments/20040722/f0436e40/attachment.htm