search for: emcpower

...let me say that this is not true while booting and additionally, I tried off-lining that path and I almost had a cardiac arrest when the rpool became corrupted. Fortunately, it just affected a couple of log files that no one will miss. :) The question then is, how can I make the rpool to use the emcpower0a device instead of the c3t5***d0s0 Solaris native device? I filed a case with EMC and Oracle, but the first one lacks ZFS knowledge and the second one says that it''s an EMC issue. I can boot the server from a DVD-ROM to do some changes without the pool''s datasets being mounted,...

...f extdisk c5t0d0 c5t1d0 ...... Let me know if this works for you. ************* follow-up question from customer ************ Yes, using the c#t#d# disks work, but anyone using fibre-channel storage on somethink like IBM Shark or EMC Clariion will want multiple paths to disk using either IBMsdd, EMCpower or Solaris native MPIO. Does ZFS work with any of these fibre channel multipathing drivers? Thanks for any assistance you can provide. -- David Curtis - TSE Sun Microsystems 303-272-6628 Enterprise Services david.curtis at sun.com OS / Installation Support Monday to Friday 9:00 AM to 6:00 PM...

On some machines running PowerPath, there''s sometimes issues after an update/upgrade of the PowerPath software. Sometimes the pseudo devices get remapped and change names. ZFS appears to handle it OK, however sometimes it then references half native device names and half the emcpower pseudo device names. So the SA can easily be confused. Is there a way to tell ZFS which device names to use? Is there a way to change which devices are referenced in a current pool? I know about the "-d" option to zpool, however to use the names in /dev/dsk can lead to unpredictable r...

...UNAVAIL cannot open Now, it''s working up to the point at which it''s worked out that the bits of the pool are in the right places. It just can''t open all the bits. Why is that? I notice that it''s using the underlying cXtXdX device names rather than the virtual emcpower{0,1} names. However, rather more worrying is that if I try to create a new pool, then it correctly fails if I use the cXtXdX device (warning me that it contains part of a pool) but if I go through the emcpower devices then I don''t get a warning. (One other snippet - the cXtXdX device node...

OEL 5, OCFS 1.4, using EMC Power Path for multi pathing. I want t mount the OCFS2 file system on the emc power path device. I can mount by UUID, and not have to worry about persistent bindings across nodes. But how do I make sure when it mounts by UUID , that the pwoer path device is used. Any help will be much appreciated. Thanks -- Sridhar Avantsa savantsa at gmail.com -------------- next

Had a problem starting Oracle after expanding an EMC Metalun. We get the following errors: >WARNING: OemInit2: Opened file(/oradata/dbf/quorum.dbf 8), tid = main:1024 file = oem.c, line = 491 {Sun Apr 17 10:33:41 2005 } >ERROR: ReadOthersDskInfo(): ReadFile(/oradata/dbf/quorum.dbf) failed(5) - (0) bytes read, tid = main:1024 file = oem.c, line = 1396 {Sun Apr 17 10:33:41 2005 }

...;& { /sbin/modprobe -r --ignore-remove qla2xxx_conf; } ###BEGINPP include /etc/modprobe.conf.pp ###ENDPP ###BEGINPP include /etc/modprobe.conf.pp ###ENDPP ###BEGINPP include /etc/modprobe.conf.pp ###ENDPP ________________________________________________ [root at server ~]# rpm -qa |grep -i EMC EMCpower.LINUX-4.5.1-022 ________________________________________________ [root at server ~]# rpm -qa|grep -i scli scli-1.06.16-57 ________________________________________________ [root at server ~]# rpm -qa|grep -i nav naviagentcli-6.19.1.3.0-1 ________________________________________________ product:...

Hello All, I have some problem with the import of pools. On the source system the pools are configured with emcpower devices on slice 2 (emcpower1c) zpool create mypool emcpower1c When i try to do an import on another hosts with mpxio enabled i get this result: pool: ora_system.2 id: 9755850482304172097 state: UNAVAIL status: One or more devices contains corrupted data. action: The pool cannot be importe...

...0.20.61 Fibre Channel Mass Storage Driver J4188-11001C E.10.34 Hewlett-Packard JetDirect Printer Installer for Unix XSW800GR1020 B.10.20.51.2 General Release Patches for HP-UX 10.20 Servers (Dec. 2000) # # Product(s) not contained in a Bundle: # EMCpower HP.3.0.0_b118 Symmetrix PowerPath for 10.20 sysinfo 3.3.1 sysinfo ****** I've also tried vers 2.2.2 and 2.0.6. Likewise, the same ERROR msg. Because of an application need, we can not upgrade to 11i at the moment. Any suggestions/comments...

I used this command to create volume label on OCFS: mkfs.ocfs -F -b 128 -L data13 -m /oradata/data13 -u oracle -g dba -p 0775 /dev/emcpowerp1 emcpowerp is composed of /dev/sdad and /dev/sdk. It seems the above command created the same labels for /dev/emcpowerp1, /dev/sdad1 and /dev/sdk1. But when I tried to mount this ocfs filesystem by label, it gave me the following error. # mount -L data13 /oradata/data13 mount: the label data13...

...olaris 10 U3 and I have small problem that I dont know how to fix... I had a pool of two drives: bash-3.00# zpool status pool: mypool state: ONLINE scrub: none requested config: NAME STATE READ WRITE CKSUM mypool ONLINE 0 0 0 emcpower0a ONLINE 0 0 0 emcpower1a ONLINE 0 0 0 errors: No known data errors I added another drive so now I have pool of 3 drives bash-3.00# zpool status pool: mypool state: ONLINE scrub: none requested config: NAME STATE READ WRITE...

...ci8-2.0.2 for inspection. Results logged to /opt/coolstack/lib/ruby/gems/1.8/gems/ruby- oci8-2.0.2/ext/oci8/gem_make.out ***********END ERROR MESSAGE*************** I already have gcc on the system. Here is my PATH: bash-3.00$ echo $PATH /export/home/roradmin1/bin:/usr/local/bin:/usr/bin:/etc:/opt/EMCpower/ bin/sparcv9:/etc/emc/bin:/usr/local/bin/:/opt/coolstack/bin:/usr/sfw/ bin:/usr/ucb:/usr/local/bin/:/opt/coolstack/bin:/usr/sfw/bin:/usr/ucb:/ opt/coolstack/lib/ruby:/opt/coolstack/lib:/export/home/roradmin1/.gem/ ruby/1.8/bin bash-3.00$ echo $LD_LIBRARY_PATH /usr/local/ssl/lib/:/usr/local/lib/:/e...

Error: mount.ocfs2: Transport endpoint is not connected while mounting /dev/sdc1 on /u02, could not mount /dev/sdc1. The installation step is: 1. install all rpms on int-rac1, int-rac2 2. interconnect int-rac1, int-rac2, ping each other using private ip and public ip ok. Add EMC SAN as shared disk and visable for two nodes. 3. configure int-rac1 using ocfs2console, add two nodes 4. according