We just put together a new system for ZFS use at a company, and twice
in one week we''ve had the system wedge. You can log on, but the zpools
are hosed, and a reboot never occurs if requested since it can''t
unmount the zfs volumes. So, only a power cycle works.
In both cases, we get this:
Dec 20 10:59:36 kona marvell88sx: [ID 331397 kern.warning] WARNING:
marvell88sx0: device on port 2 still busy
Dec 20 10:59:36 kona sata: [ID 801593 kern.notice] NOTICE:
/pci at 0,0/pci1022,7450 at b/pci11ab,11ab at 3:
Dec 20 10:59:36 kona port 2: device reset
Dec 20 10:59:37 kona marvell88sx: [ID 331397 kern.warning] WARNING:
marvell88sx0: device on port 2 still busy
Dec 20 10:59:37 kona sata: [ID 801593 kern.notice] NOTICE:
/pci at 0,0/pci1022,7450 at b/pci11ab,11ab at 3:
Dec 20 10:59:37 kona port 2: device reset
Dec 20 10:59:37 kona sata: [ID 801593 kern.notice] NOTICE:
/pci at 0,0/pci1022,7450 at b/pci11ab,11ab at 3:
Dec 20 10:59:37 kona port 2: link lost
Dec 20 10:59:37 kona sata: [ID 801593 kern.notice] NOTICE:
/pci at 0,0/pci1022,7450 at b/pci11ab,11ab at 3:
Dec 20 10:59:37 kona port 2: link established
Dec 20 10:59:37 kona marvell88sx: [ID 812950 kern.warning] WARNING:
marvell88sx0: error on port 2:
Dec 20 10:59:37 kona marvell88sx: [ID 517869 kern.info] device
disconnected
Dec 20 10:59:37 kona marvell88sx: [ID 517869 kern.info] device connected
The first time was on port 1 (Sunday) and now this has occurred on
port 2. Is there a known unrecoverable condition with the marvell
card. We adopted this card because the adaptec 16 port card was
discontinued. Everyday there seems to be less in the way of workable
SATA cards for Solaris (sigh). Here''s the output on startup, which
always occurs:
Dec 17 11:23:15 kona marvell88sx: [ID 812950 kern.warning] WARNING:
marvell88sx0: error on port 0:
Dec 17 11:23:15 kona marvell88sx: [ID 517869 kern.info] SError interrupt
Dec 17 11:23:15 kona marvell88sx: [ID 131198 kern.info] SErrors:
Dec 17 11:23:15 kona marvell88sx: [ID 517869 kern.info]
Recovered communication error
Dec 17 11:23:15 kona marvell88sx: [ID 517869 kern.info]
PHY ready change
Dec 17 11:23:15 kona marvell88sx: [ID 517869 kern.info]
10-bit to 8-bit decode error
Dec 17 11:23:15 kona marvell88sx: [ID 517869 kern.info]
Disparity error
Dec 17 11:23:15 kona marvell88sx: [ID 812950 kern.warning] WARNING:
marvell88sx0: error on port 1:
Dec 17 11:23:15 kona marvell88sx: [ID 517869 kern.info] SError interrupt
Dec 17 11:23:15 kona marvell88sx: [ID 131198 kern.info] SErrors:
Dec 17 11:23:15 kona marvell88sx: [ID 517869 kern.info]
Recovered communication error
Dec 17 11:23:15 kona marvell88sx: [ID 517869 kern.info]
PHY ready change
Dec 17 11:23:15 kona marvell88sx: [ID 517869 kern.info]
10-bit to 8-bit decode error
Dec 17 11:23:15 kona marvell88sx: [ID 517869 kern.info]
Disparity error
Dec 17 11:23:15 kona marvell88sx: [ID 812950 kern.warning] WARNING:
marvell88sx0: error on port 2:
Dec 17 11:23:15 kona marvell88sx: [ID 517869 kern.info] SError interrupt
Dec 17 11:23:15 kona marvell88sx: [ID 131198 kern.info] SErrors:
Dec 17 11:23:15 kona marvell88sx: [ID 517869 kern.info]
Recovered communication error
Dec 17 11:23:15 kona marvell88sx: [ID 517869 kern.info]
PHY ready change
Dec 17 11:23:15 kona marvell88sx: [ID 517869 kern.info]
10-bit to 8-bit decode error
Dec 17 11:23:15 kona marvell88sx: [ID 517869 kern.info]
Disparity error
Dec 17 11:23:15 kona marvell88sx: [ID 812950 kern.warning] WARNING:
marvell88sx0: error on port 3:
Dec 17 11:23:15 kona marvell88sx: [ID 517869 kern.info] SError interrupt
Dec 17 11:23:15 kona marvell88sx: [ID 131198 kern.info] SErrors:
Dec 17 11:23:15 kona marvell88sx: [ID 517869 kern.info]
Recovered communication error
Dec 17 11:23:15 kona marvell88sx: [ID 517869 kern.info]
PHY ready change
Dec 17 11:23:15 kona marvell88sx: [ID 517869 kern.info]
10-bit to 8-bit decode error
Dec 17 11:23:15 kona marvell88sx: [ID 517869 kern.info]
Disparity error
Dec 17 11:23:15 kona marvell88sx: [ID 812950 kern.warning] WARNING:
marvell88sx0: error on port 4:
Dec 17 11:23:15 kona marvell88sx: [ID 517869 kern.info] SError interrupt
Dec 17 11:23:15 kona marvell88sx: [ID 131198 kern.info] SErrors:
Dec 17 11:23:15 kona marvell88sx: [ID 517869 kern.info]
Recovered communication error
Dec 17 11:23:15 kona marvell88sx: [ID 517869 kern.info]
PHY ready change
Dec 17 11:23:15 kona marvell88sx: [ID 517869 kern.info]
10-bit to 8-bit decode error
Dec 17 11:23:15 kona marvell88sx: [ID 517869 kern.info]
Disparity error
Dec 17 11:23:15 kona marvell88sx: [ID 812950 kern.warning] WARNING:
marvell88sx0: error on port 5:
Dec 17 11:23:15 kona marvell88sx: [ID 517869 kern.info] SError interrupt
Dec 17 11:23:15 kona marvell88sx: [ID 131198 kern.info] SErrors:
Dec 17 11:23:15 kona marvell88sx: [ID 517869 kern.info]
Recovered communication error
Dec 17 11:23:15 kona marvell88sx: [ID 517869 kern.info]
PHY ready change
Dec 17 11:23:15 kona marvell88sx: [ID 517869 kern.info]
10-bit to 8-bit decode error
Dec 17 11:23:15 kona marvell88sx: [ID 517869 kern.info]
Disparity error
Dec 17 11:23:15 kona marvell88sx: [ID 812950 kern.warning] WARNING:
marvell88sx0: error on port 6:
Dec 17 11:23:15 kona marvell88sx: [ID 517869 kern.info] SError interrupt
Dec 17 11:23:15 kona marvell88sx: [ID 131198 kern.info] SErrors:
Dec 17 11:23:15 kona marvell88sx: [ID 517869 kern.info]
Recovered communication error
Dec 17 11:23:15 kona marvell88sx: [ID 517869 kern.info]
PHY ready change
Dec 17 11:23:15 kona marvell88sx: [ID 517869 kern.info]
10-bit to 8-bit decode error
Dec 17 11:23:15 kona marvell88sx: [ID 517869 kern.info]
Disparity error
Dec 17 11:23:15 kona sata: [ID 663010 kern.info]
/pci at 0,0/pci1022,7450 at b/pci11ab,11ab at 3 :
Dec 17 11:23:15 kona sata: [ID 761595 kern.info] SATA disk
device at port 0
Dec 17 11:23:15 kona sata: [ID 846691 kern.info] model WDC
WD800JD-00LSA0
Dec 17 11:23:15 kona sata: [ID 693010 kern.info] firmware 06.01D06
Dec 17 11:23:15 kona sata: [ID 163988 kern.info] serial number
WD-WMAM9X807352
Dec 17 11:23:15 kona sata: [ID 594940 kern.info] supported features:
Dec 17 11:23:15 kona sata: [ID 981177 kern.info] 48-bit LBA,
DMA, SMART, SMART self-test
Dec 17 11:23:15 kona sata: [ID 674233 kern.info] SATA1 compatible
Dec 17 11:23:15 kona sata: [ID 349649 kern.info] capacity 156301488
sectors
Dec 17 11:23:15 kona scsi: [ID 193665 kern.info] sd0 at marvell88sx0:
target 0 lun 0
Dec 17 11:23:15 kona genunix: [ID 936769 kern.info] sd0 is
/pci at 0,0/pci1022,7450 at b/pci11ab,11ab at 3/disk at 0,0
Dec 17 11:23:15 kona genunix: [ID 408114 kern.info]
/pci at 0,0/pci1022,7450 at b/pci11ab,11ab at 3/disk at 0,0 (sd0) onli
ne
Dec 17 11:23:15 kona sata: [ID 663010 kern.info]
/pci at 0,0/pci1022,7450 at b/pci11ab,11ab at 3 :
Dec 17 11:23:15 kona sata: [ID 761595 kern.info] SATA disk
device at port 1
Dec 17 11:23:15 kona sata: [ID 846691 kern.info] model WDC
WD4000YS-01MPB0
Dec 17 11:23:15 kona sata: [ID 693010 kern.info] firmware 07.02E07
Dec 17 11:23:15 kona sata: [ID 163988 kern.info] serial number
WD-WMANU1641777
Dec 17 11:23:15 kona sata: [ID 594940 kern.info] supported features:
Dec 17 11:23:15 kona sata: [ID 981177 kern.info] 48-bit LBA,
DMA, Native Command Queueing, SMART, SMAR
T self-test
Dec 17 11:23:15 kona sata: [ID 674233 kern.info] SATA1 compatible
Dec 17 11:23:15 kona sata: [ID 349649 kern.info] queue depth 32
Dec 17 11:23:15 kona sata: [ID 349649 kern.info] capacity 781422768
sectors
Dec 17 11:23:15 kona scsi: [ID 193665 kern.info] sd1 at marvell88sx0:
target 1 lun 0
Dec 17 11:23:15 kona genunix: [ID 936769 kern.info] sd1 is
/pci at 0,0/pci1022,7450 at b/pci11ab,11ab at 3/disk at 1,0
Dec 17 11:23:15 kona genunix: [ID 408114 kern.info]
/pci at 0,0/pci1022,7450 at b/pci11ab,11ab at 3/disk at 1,0 (sd1) onli
ne
Dec 17 11:23:15 kona sata: [ID 663010 kern.info]
/pci at 0,0/pci1022,7450 at b/pci11ab,11ab at 3 :
Dec 17 11:23:15 kona sata: [ID 761595 kern.info] SATA disk
device at port 2
Dec 17 11:23:15 kona sata: [ID 846691 kern.info] model WDC
WD4000YS-01MPB0
Dec 17 11:23:15 kona sata: [ID 693010 kern.info] firmware 07.02E07
Dec 17 11:23:15 kona sata: [ID 163988 kern.info] serial number
WD-WMANU1641867
Dec 17 11:23:15 kona sata: [ID 594940 kern.info] supported features:
Dec 17 11:23:15 kona sata: [ID 981177 kern.info] 48-bit LBA,
DMA, Native Command Queueing, SMART, SMAR
T self-test
Dec 17 11:23:15 kona sata: [ID 674233 kern.info] SATA1 compatible
Dec 17 11:23:15 kona sata: [ID 349649 kern.info] queue depth 32
Dec 17 11:23:15 kona sata: [ID 349649 kern.info] capacity 781422768
sectors
Dec 17 11:23:15 kona scsi: [ID 193665 kern.info] sd2 at marvell88sx0:
target 2 lun 0
Dec 17 11:23:15 kona genunix: [ID 936769 kern.info] sd2 is
/pci at 0,0/pci1022,7450 at b/pci11ab,11ab at 3/disk at 2,0
Dec 17 11:23:15 kona genunix: [ID 408114 kern.info]
/pci at 0,0/pci1022,7450 at b/pci11ab,11ab at 3/disk at 2,0 (sd2) onli
ne
Dec 17 11:23:15 kona sata: [ID 663010 kern.info]
/pci at 0,0/pci1022,7450 at b/pci11ab,11ab at 3 :
Dec 17 11:23:15 kona sata: [ID 761595 kern.info] SATA disk
device at port 3
Dec 17 11:23:15 kona sata: [ID 846691 kern.info] model WDC
WD4000YS-01MPB0
Dec 17 11:23:15 kona sata: [ID 693010 kern.info] firmware 07.02E07
Dec 17 11:23:15 kona sata: [ID 163988 kern.info] serial number
WD-WMANU1290048
Dec 17 11:23:15 kona sata: [ID 594940 kern.info] supported features:
Dec 17 11:23:15 kona sata: [ID 981177 kern.info] 48-bit LBA,
DMA, Native Command Queueing, SMART, SMAR
T self-test
Dec 17 11:23:15 kona sata: [ID 674233 kern.info] SATA1 compatible
Dec 17 11:23:15 kona sata: [ID 349649 kern.info] queue depth 32
Dec 17 11:23:15 kona sata: [ID 349649 kern.info] capacity 781422768
sectors
Dec 17 11:23:16 kona scsi: [ID 193665 kern.info] sd3 at marvell88sx0:
target 3 lun 0
Dec 17 11:23:16 kona genunix: [ID 936769 kern.info] sd3 is
/pci at 0,0/pci1022,7450 at b/pci11ab,11ab at 3/disk at 3,0
Dec 17 11:23:16 kona genunix: [ID 408114 kern.info]
/pci at 0,0/pci1022,7450 at b/pci11ab,11ab at 3/disk at 3,0 (sd3) onli
ne
Dec 17 11:23:16 kona sata: [ID 663010 kern.info]
/pci at 0,0/pci1022,7450 at b/pci11ab,11ab at 3 :
Dec 17 11:23:16 kona sata: [ID 761595 kern.info] SATA disk
device at port 4
Dec 17 11:23:16 kona sata: [ID 846691 kern.info] model WDC
WD4000YS-01MPB0
Dec 17 11:23:16 kona sata: [ID 693010 kern.info] firmware 07.02E07
Dec 17 11:23:16 kona sata: [ID 163988 kern.info] serial number
WD-WMANU1636673
Dec 17 11:23:16 kona sata: [ID 594940 kern.info] supported features:
Dec 17 11:23:16 kona sata: [ID 981177 kern.info] 48-bit LBA,
DMA, Native Command Queueing, SMART, SMAR
T self-test
Dec 17 11:23:16 kona sata: [ID 674233 kern.info] SATA1 compatible
Dec 17 11:23:16 kona sata: [ID 349649 kern.info] queue depth 32
Dec 17 11:23:16 kona sata: [ID 349649 kern.info] capacity 781422768
sectors
Dec 17 11:23:16 kona scsi: [ID 193665 kern.info] sd4 at marvell88sx0:
target 4 lun 0
Dec 17 11:23:16 kona genunix: [ID 936769 kern.info] sd4 is
/pci at 0,0/pci1022,7450 at b/pci11ab,11ab at 3/disk at 4,0
Dec 17 11:23:16 kona genunix: [ID 408114 kern.info]
/pci at 0,0/pci1022,7450 at b/pci11ab,11ab at 3/disk at 4,0 (sd4) onli
ne
Dec 17 11:23:16 kona sata: [ID 663010 kern.info]
/pci at 0,0/pci1022,7450 at b/pci11ab,11ab at 3 :
Dec 17 11:23:16 kona sata: [ID 761595 kern.info] SATA disk
device at port 5
Dec 17 11:23:16 kona sata: [ID 846691 kern.info] model WDC
WD4000YS-01MPB0
Dec 17 11:23:16 kona sata: [ID 693010 kern.info] firmware 07.02E07
Dec 17 11:23:16 kona sata: [ID 163988 kern.info] serial number
WD-WMANU1282115
Dec 17 11:23:16 kona sata: [ID 594940 kern.info] supported features:
Dec 17 11:23:16 kona sata: [ID 981177 kern.info] 48-bit LBA,
DMA, Native Command Queueing, SMART, SMAR
T self-test
Dec 17 11:23:16 kona sata: [ID 674233 kern.info] SATA1 compatible
Dec 17 11:23:16 kona sata: [ID 349649 kern.info] queue depth 32
Dec 17 11:23:16 kona sata: [ID 349649 kern.info] capacity 781422768
sectors
Dec 17 11:23:16 kona scsi: [ID 193665 kern.info] sd5 at marvell88sx0:
target 5 lun 0
Dec 17 11:23:16 kona genunix: [ID 936769 kern.info] sd5 is
/pci at 0,0/pci1022,7450 at b/pci11ab,11ab at 3/disk at 5,0
Dec 17 11:23:16 kona genunix: [ID 408114 kern.info]
/pci at 0,0/pci1022,7450 at b/pci11ab,11ab at 3/disk at 5,0 (sd5) onli
ne
Dec 17 11:23:16 kona sata: [ID 663010 kern.info]
/pci at 0,0/pci1022,7450 at b/pci11ab,11ab at 3 :
Dec 17 11:23:16 kona sata: [ID 761595 kern.info] SATA disk
device at port 6
Dec 17 11:23:16 kona sata: [ID 846691 kern.info] model WDC
WD4000YS-01MPB0
Dec 17 11:23:16 kona sata: [ID 693010 kern.info] firmware 07.02E07
Dec 17 11:23:16 kona sata: [ID 163988 kern.info] serial number
WD-WMANU1198970
Dec 17 11:23:16 kona sata: [ID 594940 kern.info] supported features:
Dec 17 11:23:16 kona sata: [ID 981177 kern.info] 48-bit LBA,
DMA, Native Command Queueing, SMART, SMAR
T self-test
Dec 17 11:23:16 kona sata: [ID 674233 kern.info] SATA1 compatible
Dec 17 11:23:16 kona sata: [ID 349649 kern.info] queue depth 32
Dec 17 11:23:16 kona sata: [ID 349649 kern.info] capacity 781422768
sectors
Dec 17 11:23:17 kona scsi: [ID 193665 kern.info] sd6 at marvell88sx0:
target 6 lun 0
Dec 17 11:23:17 kona genunix: [ID 936769 kern.info] sd6 is
/pci at 0,0/pci1022,7450 at b/pci11ab,11ab at 3/disk at 6,0
Dec 17 11:23:17 kona genunix: [ID 408114 kern.info]
/pci at 0,0/pci1022,7450 at b/pci11ab,11ab at 3/disk at 6,0 (sd6) onli
ne
On 12/20/06, Joe Little <jmlittle at gmail.com> wrote:> We just put together a new system for ZFS use at a company, and twice > in one week we''ve had the system wedge. You can log on, but the zpools > are hosed, and a reboot never occurs if requested since it can''t > unmount the zfs volumes. So, only a power cycle works. > > In both cases, we get this:Note to group.. Is the tekram 834A (SATA-II card w/ sil3124-1 and sil3124-2) supported yet? Seems like marvell is not the way to go..> > Dec 20 10:59:36 kona marvell88sx: [ID 331397 kern.warning] WARNING: > marvell88sx0: device on port 2 still busy > Dec 20 10:59:36 kona sata: [ID 801593 kern.notice] NOTICE: > /pci at 0,0/pci1022,7450 at b/pci11ab,11ab at 3: > Dec 20 10:59:36 kona port 2: device reset > Dec 20 10:59:37 kona marvell88sx: [ID 331397 kern.warning] WARNING: > marvell88sx0: device on port 2 still busy > Dec 20 10:59:37 kona sata: [ID 801593 kern.notice] NOTICE: > /pci at 0,0/pci1022,7450 at b/pci11ab,11ab at 3: > Dec 20 10:59:37 kona port 2: device reset > Dec 20 10:59:37 kona sata: [ID 801593 kern.notice] NOTICE: > /pci at 0,0/pci1022,7450 at b/pci11ab,11ab at 3: > Dec 20 10:59:37 kona port 2: link lost > Dec 20 10:59:37 kona sata: [ID 801593 kern.notice] NOTICE: > /pci at 0,0/pci1022,7450 at b/pci11ab,11ab at 3: > Dec 20 10:59:37 kona port 2: link established > Dec 20 10:59:37 kona marvell88sx: [ID 812950 kern.warning] WARNING: > marvell88sx0: error on port 2: > Dec 20 10:59:37 kona marvell88sx: [ID 517869 kern.info] device > disconnected > Dec 20 10:59:37 kona marvell88sx: [ID 517869 kern.info] device connected > > The first time was on port 1 (Sunday) and now this has occurred on > port 2. Is there a known unrecoverable condition with the marvell > card. We adopted this card because the adaptec 16 port card was > discontinued. Everyday there seems to be less in the way of workable > SATA cards for Solaris (sigh). Here''s the output on startup, which > always occurs: > > Dec 17 11:23:15 kona marvell88sx: [ID 812950 kern.warning] WARNING: > marvell88sx0: error on port 0: > Dec 17 11:23:15 kona marvell88sx: [ID 517869 kern.info] SError interrupt > Dec 17 11:23:15 kona marvell88sx: [ID 131198 kern.info] SErrors: > Dec 17 11:23:15 kona marvell88sx: [ID 517869 kern.info] > Recovered communication error > Dec 17 11:23:15 kona marvell88sx: [ID 517869 kern.info] > PHY ready change > Dec 17 11:23:15 kona marvell88sx: [ID 517869 kern.info] > 10-bit to 8-bit decode error > Dec 17 11:23:15 kona marvell88sx: [ID 517869 kern.info] > Disparity error > Dec 17 11:23:15 kona marvell88sx: [ID 812950 kern.warning] WARNING: > marvell88sx0: error on port 1: > Dec 17 11:23:15 kona marvell88sx: [ID 517869 kern.info] SError interrupt > Dec 17 11:23:15 kona marvell88sx: [ID 131198 kern.info] SErrors: > Dec 17 11:23:15 kona marvell88sx: [ID 517869 kern.info] > Recovered communication error > Dec 17 11:23:15 kona marvell88sx: [ID 517869 kern.info] > PHY ready change > Dec 17 11:23:15 kona marvell88sx: [ID 517869 kern.info] > 10-bit to 8-bit decode error > Dec 17 11:23:15 kona marvell88sx: [ID 517869 kern.info] > Disparity error > Dec 17 11:23:15 kona marvell88sx: [ID 812950 kern.warning] WARNING: > marvell88sx0: error on port 2: > Dec 17 11:23:15 kona marvell88sx: [ID 517869 kern.info] SError interrupt > Dec 17 11:23:15 kona marvell88sx: [ID 131198 kern.info] SErrors: > Dec 17 11:23:15 kona marvell88sx: [ID 517869 kern.info] > Recovered communication error > Dec 17 11:23:15 kona marvell88sx: [ID 517869 kern.info] > PHY ready change > Dec 17 11:23:15 kona marvell88sx: [ID 517869 kern.info] > 10-bit to 8-bit decode error > Dec 17 11:23:15 kona marvell88sx: [ID 517869 kern.info] > Disparity error > Dec 17 11:23:15 kona marvell88sx: [ID 812950 kern.warning] WARNING: > marvell88sx0: error on port 3: > Dec 17 11:23:15 kona marvell88sx: [ID 517869 kern.info] SError interrupt > Dec 17 11:23:15 kona marvell88sx: [ID 131198 kern.info] SErrors: > Dec 17 11:23:15 kona marvell88sx: [ID 517869 kern.info] > Recovered communication error > Dec 17 11:23:15 kona marvell88sx: [ID 517869 kern.info] > PHY ready change > Dec 17 11:23:15 kona marvell88sx: [ID 517869 kern.info] > 10-bit to 8-bit decode error > Dec 17 11:23:15 kona marvell88sx: [ID 517869 kern.info] > Disparity error > Dec 17 11:23:15 kona marvell88sx: [ID 812950 kern.warning] WARNING: > marvell88sx0: error on port 4: > Dec 17 11:23:15 kona marvell88sx: [ID 517869 kern.info] SError interrupt > Dec 17 11:23:15 kona marvell88sx: [ID 131198 kern.info] SErrors: > Dec 17 11:23:15 kona marvell88sx: [ID 517869 kern.info] > Recovered communication error > Dec 17 11:23:15 kona marvell88sx: [ID 517869 kern.info] > PHY ready change > Dec 17 11:23:15 kona marvell88sx: [ID 517869 kern.info] > 10-bit to 8-bit decode error > Dec 17 11:23:15 kona marvell88sx: [ID 517869 kern.info] > Disparity error > Dec 17 11:23:15 kona marvell88sx: [ID 812950 kern.warning] WARNING: > marvell88sx0: error on port 5: > Dec 17 11:23:15 kona marvell88sx: [ID 517869 kern.info] SError interrupt > Dec 17 11:23:15 kona marvell88sx: [ID 131198 kern.info] SErrors: > Dec 17 11:23:15 kona marvell88sx: [ID 517869 kern.info] > Recovered communication error > Dec 17 11:23:15 kona marvell88sx: [ID 517869 kern.info] > PHY ready change > Dec 17 11:23:15 kona marvell88sx: [ID 517869 kern.info] > 10-bit to 8-bit decode error > Dec 17 11:23:15 kona marvell88sx: [ID 517869 kern.info] > Disparity error > Dec 17 11:23:15 kona marvell88sx: [ID 812950 kern.warning] WARNING: > marvell88sx0: error on port 6: > Dec 17 11:23:15 kona marvell88sx: [ID 517869 kern.info] SError interrupt > Dec 17 11:23:15 kona marvell88sx: [ID 131198 kern.info] SErrors: > Dec 17 11:23:15 kona marvell88sx: [ID 517869 kern.info] > Recovered communication error > Dec 17 11:23:15 kona marvell88sx: [ID 517869 kern.info] > PHY ready change > Dec 17 11:23:15 kona marvell88sx: [ID 517869 kern.info] > 10-bit to 8-bit decode error > Dec 17 11:23:15 kona marvell88sx: [ID 517869 kern.info] > Disparity error > Dec 17 11:23:15 kona sata: [ID 663010 kern.info] > /pci at 0,0/pci1022,7450 at b/pci11ab,11ab at 3 : > Dec 17 11:23:15 kona sata: [ID 761595 kern.info] SATA disk > device at port 0 > Dec 17 11:23:15 kona sata: [ID 846691 kern.info] model WDC > WD800JD-00LSA0 > Dec 17 11:23:15 kona sata: [ID 693010 kern.info] firmware 06.01D06 > Dec 17 11:23:15 kona sata: [ID 163988 kern.info] serial number > WD-WMAM9X807352 > Dec 17 11:23:15 kona sata: [ID 594940 kern.info] supported features: > Dec 17 11:23:15 kona sata: [ID 981177 kern.info] 48-bit LBA, > DMA, SMART, SMART self-test > Dec 17 11:23:15 kona sata: [ID 674233 kern.info] SATA1 compatible > Dec 17 11:23:15 kona sata: [ID 349649 kern.info] capacity > 156301488 sectors > Dec 17 11:23:15 kona scsi: [ID 193665 kern.info] sd0 at marvell88sx0: > target 0 lun 0 > Dec 17 11:23:15 kona genunix: [ID 936769 kern.info] sd0 is > /pci at 0,0/pci1022,7450 at b/pci11ab,11ab at 3/disk at 0,0 > Dec 17 11:23:15 kona genunix: [ID 408114 kern.info] > /pci at 0,0/pci1022,7450 at b/pci11ab,11ab at 3/disk at 0,0 (sd0) onli > ne > Dec 17 11:23:15 kona sata: [ID 663010 kern.info] > /pci at 0,0/pci1022,7450 at b/pci11ab,11ab at 3 : > Dec 17 11:23:15 kona sata: [ID 761595 kern.info] SATA disk > device at port 1 > Dec 17 11:23:15 kona sata: [ID 846691 kern.info] model WDC > WD4000YS-01MPB0 > Dec 17 11:23:15 kona sata: [ID 693010 kern.info] firmware 07.02E07 > Dec 17 11:23:15 kona sata: [ID 163988 kern.info] serial number > WD-WMANU1641777 > Dec 17 11:23:15 kona sata: [ID 594940 kern.info] supported features: > Dec 17 11:23:15 kona sata: [ID 981177 kern.info] 48-bit LBA, > DMA, Native Command Queueing, SMART, SMAR > T self-test > Dec 17 11:23:15 kona sata: [ID 674233 kern.info] SATA1 compatible > Dec 17 11:23:15 kona sata: [ID 349649 kern.info] queue depth 32 > Dec 17 11:23:15 kona sata: [ID 349649 kern.info] capacity > 781422768 sectors > Dec 17 11:23:15 kona scsi: [ID 193665 kern.info] sd1 at marvell88sx0: > target 1 lun 0 > Dec 17 11:23:15 kona genunix: [ID 936769 kern.info] sd1 is > /pci at 0,0/pci1022,7450 at b/pci11ab,11ab at 3/disk at 1,0 > Dec 17 11:23:15 kona genunix: [ID 408114 kern.info] > /pci at 0,0/pci1022,7450 at b/pci11ab,11ab at 3/disk at 1,0 (sd1) onli > ne > Dec 17 11:23:15 kona sata: [ID 663010 kern.info] > /pci at 0,0/pci1022,7450 at b/pci11ab,11ab at 3 : > Dec 17 11:23:15 kona sata: [ID 761595 kern.info] SATA disk > device at port 2 > Dec 17 11:23:15 kona sata: [ID 846691 kern.info] model WDC > WD4000YS-01MPB0 > Dec 17 11:23:15 kona sata: [ID 693010 kern.info] firmware 07.02E07 > Dec 17 11:23:15 kona sata: [ID 163988 kern.info] serial number > WD-WMANU1641867 > Dec 17 11:23:15 kona sata: [ID 594940 kern.info] supported features: > Dec 17 11:23:15 kona sata: [ID 981177 kern.info] 48-bit LBA, > DMA, Native Command Queueing, SMART, SMAR > T self-test > Dec 17 11:23:15 kona sata: [ID 674233 kern.info] SATA1 compatible > Dec 17 11:23:15 kona sata: [ID 349649 kern.info] queue depth 32 > Dec 17 11:23:15 kona sata: [ID 349649 kern.info] capacity > 781422768 sectors > Dec 17 11:23:15 kona scsi: [ID 193665 kern.info] sd2 at marvell88sx0: > target 2 lun 0 > Dec 17 11:23:15 kona genunix: [ID 936769 kern.info] sd2 is > /pci at 0,0/pci1022,7450 at b/pci11ab,11ab at 3/disk at 2,0 > Dec 17 11:23:15 kona genunix: [ID 408114 kern.info] > /pci at 0,0/pci1022,7450 at b/pci11ab,11ab at 3/disk at 2,0 (sd2) onli > ne > Dec 17 11:23:15 kona sata: [ID 663010 kern.info] > /pci at 0,0/pci1022,7450 at b/pci11ab,11ab at 3 : > Dec 17 11:23:15 kona sata: [ID 761595 kern.info] SATA disk > device at port 3 > Dec 17 11:23:15 kona sata: [ID 846691 kern.info] model WDC > WD4000YS-01MPB0 > Dec 17 11:23:15 kona sata: [ID 693010 kern.info] firmware 07.02E07 > Dec 17 11:23:15 kona sata: [ID 163988 kern.info] serial number > WD-WMANU1290048 > Dec 17 11:23:15 kona sata: [ID 594940 kern.info] supported features: > Dec 17 11:23:15 kona sata: [ID 981177 kern.info] 48-bit LBA, > DMA, Native Command Queueing, SMART, SMAR > T self-test > Dec 17 11:23:15 kona sata: [ID 674233 kern.info] SATA1 compatible > Dec 17 11:23:15 kona sata: [ID 349649 kern.info] queue depth 32 > Dec 17 11:23:15 kona sata: [ID 349649 kern.info] capacity > 781422768 sectors > Dec 17 11:23:16 kona scsi: [ID 193665 kern.info] sd3 at marvell88sx0: > target 3 lun 0 > Dec 17 11:23:16 kona genunix: [ID 936769 kern.info] sd3 is > /pci at 0,0/pci1022,7450 at b/pci11ab,11ab at 3/disk at 3,0 > Dec 17 11:23:16 kona genunix: [ID 408114 kern.info] > /pci at 0,0/pci1022,7450 at b/pci11ab,11ab at 3/disk at 3,0 (sd3) onli > ne > Dec 17 11:23:16 kona sata: [ID 663010 kern.info] > /pci at 0,0/pci1022,7450 at b/pci11ab,11ab at 3 : > Dec 17 11:23:16 kona sata: [ID 761595 kern.info] SATA disk > device at port 4 > Dec 17 11:23:16 kona sata: [ID 846691 kern.info] model WDC > WD4000YS-01MPB0 > Dec 17 11:23:16 kona sata: [ID 693010 kern.info] firmware 07.02E07 > Dec 17 11:23:16 kona sata: [ID 163988 kern.info] serial number > WD-WMANU1636673 > Dec 17 11:23:16 kona sata: [ID 594940 kern.info] supported features: > Dec 17 11:23:16 kona sata: [ID 981177 kern.info] 48-bit LBA, > DMA, Native Command Queueing, SMART, SMAR > T self-test > Dec 17 11:23:16 kona sata: [ID 674233 kern.info] SATA1 compatible > Dec 17 11:23:16 kona sata: [ID 349649 kern.info] queue depth 32 > Dec 17 11:23:16 kona sata: [ID 349649 kern.info] capacity > 781422768 sectors > Dec 17 11:23:16 kona scsi: [ID 193665 kern.info] sd4 at marvell88sx0: > target 4 lun 0 > Dec 17 11:23:16 kona genunix: [ID 936769 kern.info] sd4 is > /pci at 0,0/pci1022,7450 at b/pci11ab,11ab at 3/disk at 4,0 > Dec 17 11:23:16 kona genunix: [ID 408114 kern.info] > /pci at 0,0/pci1022,7450 at b/pci11ab,11ab at 3/disk at 4,0 (sd4) onli > ne > Dec 17 11:23:16 kona sata: [ID 663010 kern.info] > /pci at 0,0/pci1022,7450 at b/pci11ab,11ab at 3 : > Dec 17 11:23:16 kona sata: [ID 761595 kern.info] SATA disk > device at port 5 > Dec 17 11:23:16 kona sata: [ID 846691 kern.info] model WDC > WD4000YS-01MPB0 > Dec 17 11:23:16 kona sata: [ID 693010 kern.info] firmware 07.02E07 > Dec 17 11:23:16 kona sata: [ID 163988 kern.info] serial number > WD-WMANU1282115 > Dec 17 11:23:16 kona sata: [ID 594940 kern.info] supported features: > Dec 17 11:23:16 kona sata: [ID 981177 kern.info] 48-bit LBA, > DMA, Native Command Queueing, SMART, SMAR > T self-test > Dec 17 11:23:16 kona sata: [ID 674233 kern.info] SATA1 compatible > Dec 17 11:23:16 kona sata: [ID 349649 kern.info] queue depth 32 > Dec 17 11:23:16 kona sata: [ID 349649 kern.info] capacity > 781422768 sectors > Dec 17 11:23:16 kona scsi: [ID 193665 kern.info] sd5 at marvell88sx0: > target 5 lun 0 > Dec 17 11:23:16 kona genunix: [ID 936769 kern.info] sd5 is > /pci at 0,0/pci1022,7450 at b/pci11ab,11ab at 3/disk at 5,0 > Dec 17 11:23:16 kona genunix: [ID 408114 kern.info] > /pci at 0,0/pci1022,7450 at b/pci11ab,11ab at 3/disk at 5,0 (sd5) onli > ne > Dec 17 11:23:16 kona sata: [ID 663010 kern.info] > /pci at 0,0/pci1022,7450 at b/pci11ab,11ab at 3 : > Dec 17 11:23:16 kona sata: [ID 761595 kern.info] SATA disk > device at port 6 > Dec 17 11:23:16 kona sata: [ID 846691 kern.info] model WDC > WD4000YS-01MPB0 > Dec 17 11:23:16 kona sata: [ID 693010 kern.info] firmware 07.02E07 > Dec 17 11:23:16 kona sata: [ID 163988 kern.info] serial number > WD-WMANU1198970 > Dec 17 11:23:16 kona sata: [ID 594940 kern.info] supported features: > Dec 17 11:23:16 kona sata: [ID 981177 kern.info] 48-bit LBA, > DMA, Native Command Queueing, SMART, SMAR > T self-test > Dec 17 11:23:16 kona sata: [ID 674233 kern.info] SATA1 compatible > Dec 17 11:23:16 kona sata: [ID 349649 kern.info] queue depth 32 > Dec 17 11:23:16 kona sata: [ID 349649 kern.info] capacity > 781422768 sectors > Dec 17 11:23:17 kona scsi: [ID 193665 kern.info] sd6 at marvell88sx0: > target 6 lun 0 > Dec 17 11:23:17 kona genunix: [ID 936769 kern.info] sd6 is > /pci at 0,0/pci1022,7450 at b/pci11ab,11ab at 3/disk at 6,0 > Dec 17 11:23:17 kona genunix: [ID 408114 kern.info] > /pci at 0,0/pci1022,7450 at b/pci11ab,11ab at 3/disk at 6,0 (sd6) onli > ne >
Some further joy: http://bugs.opensolaris.org/view_bug.do?bug_id=6504404 On 12/20/06, Joe Little <jmlittle at gmail.com> wrote:> On 12/20/06, Joe Little <jmlittle at gmail.com> wrote: > > We just put together a new system for ZFS use at a company, and twice > > in one week we''ve had the system wedge. You can log on, but the zpools > > are hosed, and a reboot never occurs if requested since it can''t > > unmount the zfs volumes. So, only a power cycle works. > > > > In both cases, we get this: > > Note to group.. Is the tekram 834A (SATA-II card w/ sil3124-1 and > sil3124-2) supported yet? > > Seems like marvell is not the way to go.. > > > > > > Dec 20 10:59:36 kona marvell88sx: [ID 331397 kern.warning] WARNING: > > marvell88sx0: device on port 2 still busy > > Dec 20 10:59:36 kona sata: [ID 801593 kern.notice] NOTICE: > > /pci at 0,0/pci1022,7450 at b/pci11ab,11ab at 3: > > Dec 20 10:59:36 kona port 2: device reset > > Dec 20 10:59:37 kona marvell88sx: [ID 331397 kern.warning] WARNING: > > marvell88sx0: device on port 2 still busy > > Dec 20 10:59:37 kona sata: [ID 801593 kern.notice] NOTICE: > > /pci at 0,0/pci1022,7450 at b/pci11ab,11ab at 3: > > Dec 20 10:59:37 kona port 2: device reset > > Dec 20 10:59:37 kona sata: [ID 801593 kern.notice] NOTICE: > > /pci at 0,0/pci1022,7450 at b/pci11ab,11ab at 3: > > Dec 20 10:59:37 kona port 2: link lost > > Dec 20 10:59:37 kona sata: [ID 801593 kern.notice] NOTICE: > > /pci at 0,0/pci1022,7450 at b/pci11ab,11ab at 3: > > Dec 20 10:59:37 kona port 2: link established > > Dec 20 10:59:37 kona marvell88sx: [ID 812950 kern.warning] WARNING: > > marvell88sx0: error on port 2: > > Dec 20 10:59:37 kona marvell88sx: [ID 517869 kern.info] device > > disconnected > > Dec 20 10:59:37 kona marvell88sx: [ID 517869 kern.info] device connected > > > > The first time was on port 1 (Sunday) and now this has occurred on > > port 2. Is there a known unrecoverable condition with the marvell > > card. We adopted this card because the adaptec 16 port card was > > discontinued. Everyday there seems to be less in the way of workable > > SATA cards for Solaris (sigh). Here''s the output on startup, which > > always occurs: > > > > Dec 17 11:23:15 kona marvell88sx: [ID 812950 kern.warning] WARNING: > > marvell88sx0: error on port 0: > > Dec 17 11:23:15 kona marvell88sx: [ID 517869 kern.info] SError interrupt > > Dec 17 11:23:15 kona marvell88sx: [ID 131198 kern.info] SErrors: > > Dec 17 11:23:15 kona marvell88sx: [ID 517869 kern.info] > > Recovered communication error > > Dec 17 11:23:15 kona marvell88sx: [ID 517869 kern.info] > > PHY ready change > > Dec 17 11:23:15 kona marvell88sx: [ID 517869 kern.info] > > 10-bit to 8-bit decode error > > Dec 17 11:23:15 kona marvell88sx: [ID 517869 kern.info] > > Disparity error > > Dec 17 11:23:15 kona marvell88sx: [ID 812950 kern.warning] WARNING: > > marvell88sx0: error on port 1: > > Dec 17 11:23:15 kona marvell88sx: [ID 517869 kern.info] SError interrupt > > Dec 17 11:23:15 kona marvell88sx: [ID 131198 kern.info] SErrors: > > Dec 17 11:23:15 kona marvell88sx: [ID 517869 kern.info] > > Recovered communication error > > Dec 17 11:23:15 kona marvell88sx: [ID 517869 kern.info] > > PHY ready change > > Dec 17 11:23:15 kona marvell88sx: [ID 517869 kern.info] > > 10-bit to 8-bit decode error > > Dec 17 11:23:15 kona marvell88sx: [ID 517869 kern.info] > > Disparity error > > Dec 17 11:23:15 kona marvell88sx: [ID 812950 kern.warning] WARNING: > > marvell88sx0: error on port 2: > > Dec 17 11:23:15 kona marvell88sx: [ID 517869 kern.info] SError interrupt > > Dec 17 11:23:15 kona marvell88sx: [ID 131198 kern.info] SErrors: > > Dec 17 11:23:15 kona marvell88sx: [ID 517869 kern.info] > > Recovered communication error > > Dec 17 11:23:15 kona marvell88sx: [ID 517869 kern.info] > > PHY ready change > > Dec 17 11:23:15 kona marvell88sx: [ID 517869 kern.info] > > 10-bit to 8-bit decode error > > Dec 17 11:23:15 kona marvell88sx: [ID 517869 kern.info] > > Disparity error > > Dec 17 11:23:15 kona marvell88sx: [ID 812950 kern.warning] WARNING: > > marvell88sx0: error on port 3: > > Dec 17 11:23:15 kona marvell88sx: [ID 517869 kern.info] SError interrupt > > Dec 17 11:23:15 kona marvell88sx: [ID 131198 kern.info] SErrors: > > Dec 17 11:23:15 kona marvell88sx: [ID 517869 kern.info] > > Recovered communication error > > Dec 17 11:23:15 kona marvell88sx: [ID 517869 kern.info] > > PHY ready change > > Dec 17 11:23:15 kona marvell88sx: [ID 517869 kern.info] > > 10-bit to 8-bit decode error > > Dec 17 11:23:15 kona marvell88sx: [ID 517869 kern.info] > > Disparity error > > Dec 17 11:23:15 kona marvell88sx: [ID 812950 kern.warning] WARNING: > > marvell88sx0: error on port 4: > > Dec 17 11:23:15 kona marvell88sx: [ID 517869 kern.info] SError interrupt > > Dec 17 11:23:15 kona marvell88sx: [ID 131198 kern.info] SErrors: > > Dec 17 11:23:15 kona marvell88sx: [ID 517869 kern.info] > > Recovered communication error > > Dec 17 11:23:15 kona marvell88sx: [ID 517869 kern.info] > > PHY ready change > > Dec 17 11:23:15 kona marvell88sx: [ID 517869 kern.info] > > 10-bit to 8-bit decode error > > Dec 17 11:23:15 kona marvell88sx: [ID 517869 kern.info] > > Disparity error > > Dec 17 11:23:15 kona marvell88sx: [ID 812950 kern.warning] WARNING: > > marvell88sx0: error on port 5: > > Dec 17 11:23:15 kona marvell88sx: [ID 517869 kern.info] SError interrupt > > Dec 17 11:23:15 kona marvell88sx: [ID 131198 kern.info] SErrors: > > Dec 17 11:23:15 kona marvell88sx: [ID 517869 kern.info] > > Recovered communication error > > Dec 17 11:23:15 kona marvell88sx: [ID 517869 kern.info] > > PHY ready change > > Dec 17 11:23:15 kona marvell88sx: [ID 517869 kern.info] > > 10-bit to 8-bit decode error > > Dec 17 11:23:15 kona marvell88sx: [ID 517869 kern.info] > > Disparity error > > Dec 17 11:23:15 kona marvell88sx: [ID 812950 kern.warning] WARNING: > > marvell88sx0: error on port 6: > > Dec 17 11:23:15 kona marvell88sx: [ID 517869 kern.info] SError interrupt > > Dec 17 11:23:15 kona marvell88sx: [ID 131198 kern.info] SErrors: > > Dec 17 11:23:15 kona marvell88sx: [ID 517869 kern.info] > > Recovered communication error > > Dec 17 11:23:15 kona marvell88sx: [ID 517869 kern.info] > > PHY ready change > > Dec 17 11:23:15 kona marvell88sx: [ID 517869 kern.info] > > 10-bit to 8-bit decode error > > Dec 17 11:23:15 kona marvell88sx: [ID 517869 kern.info] > > Disparity error > > Dec 17 11:23:15 kona sata: [ID 663010 kern.info] > > /pci at 0,0/pci1022,7450 at b/pci11ab,11ab at 3 : > > Dec 17 11:23:15 kona sata: [ID 761595 kern.info] SATA disk > > device at port 0 > > Dec 17 11:23:15 kona sata: [ID 846691 kern.info] model WDC > > WD800JD-00LSA0 > > Dec 17 11:23:15 kona sata: [ID 693010 kern.info] firmware 06.01D06 > > Dec 17 11:23:15 kona sata: [ID 163988 kern.info] serial number > > WD-WMAM9X807352 > > Dec 17 11:23:15 kona sata: [ID 594940 kern.info] supported features: > > Dec 17 11:23:15 kona sata: [ID 981177 kern.info] 48-bit LBA, > > DMA, SMART, SMART self-test > > Dec 17 11:23:15 kona sata: [ID 674233 kern.info] SATA1 compatible > > Dec 17 11:23:15 kona sata: [ID 349649 kern.info] capacity > > 156301488 sectors > > Dec 17 11:23:15 kona scsi: [ID 193665 kern.info] sd0 at marvell88sx0: > > target 0 lun 0 > > Dec 17 11:23:15 kona genunix: [ID 936769 kern.info] sd0 is > > /pci at 0,0/pci1022,7450 at b/pci11ab,11ab at 3/disk at 0,0 > > Dec 17 11:23:15 kona genunix: [ID 408114 kern.info] > > /pci at 0,0/pci1022,7450 at b/pci11ab,11ab at 3/disk at 0,0 (sd0) onli > > ne > > Dec 17 11:23:15 kona sata: [ID 663010 kern.info] > > /pci at 0,0/pci1022,7450 at b/pci11ab,11ab at 3 : > > Dec 17 11:23:15 kona sata: [ID 761595 kern.info] SATA disk > > device at port 1 > > Dec 17 11:23:15 kona sata: [ID 846691 kern.info] model WDC > > WD4000YS-01MPB0 > > Dec 17 11:23:15 kona sata: [ID 693010 kern.info] firmware 07.02E07 > > Dec 17 11:23:15 kona sata: [ID 163988 kern.info] serial number > > WD-WMANU1641777 > > Dec 17 11:23:15 kona sata: [ID 594940 kern.info] supported features: > > Dec 17 11:23:15 kona sata: [ID 981177 kern.info] 48-bit LBA, > > DMA, Native Command Queueing, SMART, SMAR > > T self-test > > Dec 17 11:23:15 kona sata: [ID 674233 kern.info] SATA1 compatible > > Dec 17 11:23:15 kona sata: [ID 349649 kern.info] queue depth 32 > > Dec 17 11:23:15 kona sata: [ID 349649 kern.info] capacity > > 781422768 sectors > > Dec 17 11:23:15 kona scsi: [ID 193665 kern.info] sd1 at marvell88sx0: > > target 1 lun 0 > > Dec 17 11:23:15 kona genunix: [ID 936769 kern.info] sd1 is > > /pci at 0,0/pci1022,7450 at b/pci11ab,11ab at 3/disk at 1,0 > > Dec 17 11:23:15 kona genunix: [ID 408114 kern.info] > > /pci at 0,0/pci1022,7450 at b/pci11ab,11ab at 3/disk at 1,0 (sd1) onli > > ne > > Dec 17 11:23:15 kona sata: [ID 663010 kern.info] > > /pci at 0,0/pci1022,7450 at b/pci11ab,11ab at 3 : > > Dec 17 11:23:15 kona sata: [ID 761595 kern.info] SATA disk > > device at port 2 > > Dec 17 11:23:15 kona sata: [ID 846691 kern.info] model WDC > > WD4000YS-01MPB0 > > Dec 17 11:23:15 kona sata: [ID 693010 kern.info] firmware 07.02E07 > > Dec 17 11:23:15 kona sata: [ID 163988 kern.info] serial number > > WD-WMANU1641867 > > Dec 17 11:23:15 kona sata: [ID 594940 kern.info] supported features: > > Dec 17 11:23:15 kona sata: [ID 981177 kern.info] 48-bit LBA, > > DMA, Native Command Queueing, SMART, SMAR > > T self-test > > Dec 17 11:23:15 kona sata: [ID 674233 kern.info] SATA1 compatible > > Dec 17 11:23:15 kona sata: [ID 349649 kern.info] queue depth 32 > > Dec 17 11:23:15 kona sata: [ID 349649 kern.info] capacity > > 781422768 sectors > > Dec 17 11:23:15 kona scsi: [ID 193665 kern.info] sd2 at marvell88sx0: > > target 2 lun 0 > > Dec 17 11:23:15 kona genunix: [ID 936769 kern.info] sd2 is > > /pci at 0,0/pci1022,7450 at b/pci11ab,11ab at 3/disk at 2,0 > > Dec 17 11:23:15 kona genunix: [ID 408114 kern.info] > > /pci at 0,0/pci1022,7450 at b/pci11ab,11ab at 3/disk at 2,0 (sd2) onli > > ne > > Dec 17 11:23:15 kona sata: [ID 663010 kern.info] > > /pci at 0,0/pci1022,7450 at b/pci11ab,11ab at 3 : > > Dec 17 11:23:15 kona sata: [ID 761595 kern.info] SATA disk > > device at port 3 > > Dec 17 11:23:15 kona sata: [ID 846691 kern.info] model WDC > > WD4000YS-01MPB0 > > Dec 17 11:23:15 kona sata: [ID 693010 kern.info] firmware 07.02E07 > > Dec 17 11:23:15 kona sata: [ID 163988 kern.info] serial number > > WD-WMANU1290048 > > Dec 17 11:23:15 kona sata: [ID 594940 kern.info] supported features: > > Dec 17 11:23:15 kona sata: [ID 981177 kern.info] 48-bit LBA, > > DMA, Native Command Queueing, SMART, SMAR > > T self-test > > Dec 17 11:23:15 kona sata: [ID 674233 kern.info] SATA1 compatible > > Dec 17 11:23:15 kona sata: [ID 349649 kern.info] queue depth 32 > > Dec 17 11:23:15 kona sata: [ID 349649 kern.info] capacity > > 781422768 sectors > > Dec 17 11:23:16 kona scsi: [ID 193665 kern.info] sd3 at marvell88sx0: > > target 3 lun 0 > > Dec 17 11:23:16 kona genunix: [ID 936769 kern.info] sd3 is > > /pci at 0,0/pci1022,7450 at b/pci11ab,11ab at 3/disk at 3,0 > > Dec 17 11:23:16 kona genunix: [ID 408114 kern.info] > > /pci at 0,0/pci1022,7450 at b/pci11ab,11ab at 3/disk at 3,0 (sd3) onli > > ne > > Dec 17 11:23:16 kona sata: [ID 663010 kern.info] > > /pci at 0,0/pci1022,7450 at b/pci11ab,11ab at 3 : > > Dec 17 11:23:16 kona sata: [ID 761595 kern.info] SATA disk > > device at port 4 > > Dec 17 11:23:16 kona sata: [ID 846691 kern.info] model WDC > > WD4000YS-01MPB0 > > Dec 17 11:23:16 kona sata: [ID 693010 kern.info] firmware 07.02E07 > > Dec 17 11:23:16 kona sata: [ID 163988 kern.info] serial number > > WD-WMANU1636673 > > Dec 17 11:23:16 kona sata: [ID 594940 kern.info] supported features: > > Dec 17 11:23:16 kona sata: [ID 981177 kern.info] 48-bit LBA, > > DMA, Native Command Queueing, SMART, SMAR > > T self-test > > Dec 17 11:23:16 kona sata: [ID 674233 kern.info] SATA1 compatible > > Dec 17 11:23:16 kona sata: [ID 349649 kern.info] queue depth 32 > > Dec 17 11:23:16 kona sata: [ID 349649 kern.info] capacity > > 781422768 sectors > > Dec 17 11:23:16 kona scsi: [ID 193665 kern.info] sd4 at marvell88sx0: > > target 4 lun 0 > > Dec 17 11:23:16 kona genunix: [ID 936769 kern.info] sd4 is > > /pci at 0,0/pci1022,7450 at b/pci11ab,11ab at 3/disk at 4,0 > > Dec 17 11:23:16 kona genunix: [ID 408114 kern.info] > > /pci at 0,0/pci1022,7450 at b/pci11ab,11ab at 3/disk at 4,0 (sd4) onli > > ne > > Dec 17 11:23:16 kona sata: [ID 663010 kern.info] > > /pci at 0,0/pci1022,7450 at b/pci11ab,11ab at 3 : > > Dec 17 11:23:16 kona sata: [ID 761595 kern.info] SATA disk > > device at port 5 > > Dec 17 11:23:16 kona sata: [ID 846691 kern.info] model WDC > > WD4000YS-01MPB0 > > Dec 17 11:23:16 kona sata: [ID 693010 kern.info] firmware 07.02E07 > > Dec 17 11:23:16 kona sata: [ID 163988 kern.info] serial number > > WD-WMANU1282115 > > Dec 17 11:23:16 kona sata: [ID 594940 kern.info] supported features: > > Dec 17 11:23:16 kona sata: [ID 981177 kern.info] 48-bit LBA, > > DMA, Native Command Queueing, SMART, SMAR > > T self-test > > Dec 17 11:23:16 kona sata: [ID 674233 kern.info] SATA1 compatible > > Dec 17 11:23:16 kona sata: [ID 349649 kern.info] queue depth 32 > > Dec 17 11:23:16 kona sata: [ID 349649 kern.info] capacity > > 781422768 sectors > > Dec 17 11:23:16 kona scsi: [ID 193665 kern.info] sd5 at marvell88sx0: > > target 5 lun 0 > > Dec 17 11:23:16 kona genunix: [ID 936769 kern.info] sd5 is > > /pci at 0,0/pci1022,7450 at b/pci11ab,11ab at 3/disk at 5,0 > > Dec 17 11:23:16 kona genunix: [ID 408114 kern.info] > > /pci at 0,0/pci1022,7450 at b/pci11ab,11ab at 3/disk at 5,0 (sd5) onli > > ne > > Dec 17 11:23:16 kona sata: [ID 663010 kern.info] > > /pci at 0,0/pci1022,7450 at b/pci11ab,11ab at 3 : > > Dec 17 11:23:16 kona sata: [ID 761595 kern.info] SATA disk > > device at port 6 > > Dec 17 11:23:16 kona sata: [ID 846691 kern.info] model WDC > > WD4000YS-01MPB0 > > Dec 17 11:23:16 kona sata: [ID 693010 kern.info] firmware 07.02E07 > > Dec 17 11:23:16 kona sata: [ID 163988 kern.info] serial number > > WD-WMANU1198970 > > Dec 17 11:23:16 kona sata: [ID 594940 kern.info] supported features: > > Dec 17 11:23:16 kona sata: [ID 981177 kern.info] 48-bit LBA, > > DMA, Native Command Queueing, SMART, SMAR > > T self-test > > Dec 17 11:23:16 kona sata: [ID 674233 kern.info] SATA1 compatible > > Dec 17 11:23:16 kona sata: [ID 349649 kern.info] queue depth 32 > > Dec 17 11:23:16 kona sata: [ID 349649 kern.info] capacity > > 781422768 sectors > > Dec 17 11:23:17 kona scsi: [ID 193665 kern.info] sd6 at marvell88sx0: > > target 6 lun 0 > > Dec 17 11:23:17 kona genunix: [ID 936769 kern.info] sd6 is > > /pci at 0,0/pci1022,7450 at b/pci11ab,11ab at 3/disk at 6,0 > > Dec 17 11:23:17 kona genunix: [ID 408114 kern.info] > > /pci at 0,0/pci1022,7450 at b/pci11ab,11ab at 3/disk at 6,0 (sd6) onli > > ne > > >
> We just put together a new system for ZFS use at a > company, and twice > in one week we''ve had the system wedge. You can log > on, but the zpools > are hosed, and a reboot never occurs if requested > since it can''t > unmount the zfs volumes. So, only a power cycle > works. >I''ve tried to reproduce this problem here at Sun with no luck. No errors, no wedges, nothing but normal behavior. If there is to be any progress on this more details on how to reproduce this problem will have to be provided. Regards, Lida This message posted from opensolaris.org