samba - Dec 2017 - DNS issue with clean install of samba 4.5.12-Debian

On 12/8/2017 2:54 PM, Taylor Hammerling via samba wrote:
> Glad you guys replied, here is my output :D
>
> root at dc1:~# ./samba-setup-checkup.sh
> Check hostnames : Ok
> ./samba-setup-checkup.sh: line 89: [: too many arguments
> Checking detected host ipnumbers from resolv.conf and default gateway
> Ping gateway ip : 172.28.0.1 : Ok
> ping nameserver1: 172.28.255.49 : Ok
> ping nameserver2: 172.28.0.1 : Ok
> Check ping google dns : 8.8.8.8 : Ok
> root at dc1:~#
>
>
> so, everything looks good except for the part that bombs out :D
>
> On Fri, Dec 8, 2017 at 1:43 PM, Rowland Penny via samba <
> samba at lists.samba.org> wrote:
>
>> On Fri, 8 Dec 2017 14:25:19 -0500
>> lingpanda101 via samba <samba at lists.samba.org> wrote:
>>
>>> On 12/8/2017 1:50 PM, Rowland Penny via samba wrote:
>>>> On Fri, 8 Dec 2017 12:27:30 -0600
>>>> Taylor Hammerling via samba <samba at lists.samba.org>
wrote:
>>>>
>>>>> Will do, thanks!
>>>>>
>>>> Specifically, go here:
>>>>
https://github.com/thctlo/samba4/blob/master/samba-setup-checkup.sh
>>>>
>>>> Download and run the script and then look at the output, you
can
>>>> send the output direct to me if needed and I will see if I can
spot
>>>> any problems.
>>>>
>>>> Rowland
>>>>
>>>>
>>> Rowland,
>>>
>>>       Decided to run your script for giggles and I receive a error
>>>
>>> ./samba-setup-checkup.sh: line 89: [: too many arguments
>>>
>>>
>> Funnily enough, so do I ;-)
>>
>> it isn't my script, it is Louis's, but I had some input and it
looks
>> like I will be having some more.
>>
>> To be continued.......
>>
>> Rowland
>>
>> --
>> To unsubscribe from this list go to the following URL and read the
>> instructions:  https://lists.samba.org/mailman/options/samba
>>
>
>
Rowland,

     Ran again with updated script. Fixed initial error. I will preface 
with my OS is Ubuntu 14.05.5 LTS. This script should still work, no?

I did notice I had a error in my resolv.conf. It had details pertaining 
to another server. Must of mixed up my SSH window. Fixed and ran again 
but threw an error with my /etc/krb.conf.conf file. Not really an error 
but a change I knew I made to it.

dns_lookup_realm = true

I reverted the change just to satisfy the script, but it continues to 
report the prior discrepancy I believe.

Incorrect '/etc/krb5.conf' file.
Expected:
[libdefaults]
         default_realm = DOMAIN.LOCAL
         dns_lookup_realm = false
         dns_lookup_kdc = true

Got:
[libdefaults]
         default_realm = DOMAIN.LOCAL
         dns_lookup_realm = false
         dns_lookup_kdc = true

Is their a cache I'm not aware of because these two look identical now? 
I then get a legitimate error

ldb: unable to stat module /usr/lib/x86_64-linux-gnu/samba/ldb : No such 
file or directory

I didn't have samba-dsdb-modules installed. It isn't necessary for a 
proper install of Samba I believe but only for the purposes of this 
script? I went and installed anyways, but I was greeted with another 
error I don't know how to proceed.

ERROR(<type 'exceptions.AttributeError'>): uncaught exception - 
'NoneType' object has no attribute 'canonical_str'
   File "/usr/lib/python2.7/dist-packages/samba/netcmd/__init__.py", 
line 175, in _run
     return self.run(*args, **kwargs)
   File "/usr/lib/python2.7/dist-packages/samba/netcmd/fsmo.py", line 
415, in run
     forest_dn = samba.dn_from_dns_name(samdb.forest_dns_name())
   File "/usr/lib/python2.7/dist-packages/samba/samdb.py", line 655,
in
forest_dns_name
     return forest_dn.canonical_str().split('/')[0]


Is this supposed to be a debian only script from Louis? If so my 
apologizes for wasting your time.

--
James

On Mon, 11 Dec 2017 08:51:01 -0500
lingpanda101 via samba <samba at lists.samba.org> wrote:
> On 12/8/2017 2:54 PM, Taylor Hammerling via samba wrote:
> > Glad you guys replied, here is my output :D
> >
> > root at dc1:~# ./samba-setup-checkup.sh
> > Check hostnames : Ok
> > ./samba-setup-checkup.sh: line 89: [: too many arguments
> > Checking detected host ipnumbers from resolv.conf and default
> > gateway Ping gateway ip : 172.28.0.1 : Ok
> > ping nameserver1: 172.28.255.49 : Ok
> > ping nameserver2: 172.28.0.1 : Ok
> > Check ping google dns : 8.8.8.8 : Ok
> > root at dc1:~#
> >
> >
> > so, everything looks good except for the part that bombs out :D
> >
> > On Fri, Dec 8, 2017 at 1:43 PM, Rowland Penny via samba <
> > samba at lists.samba.org> wrote:
> >
> >> On Fri, 8 Dec 2017 14:25:19 -0500
> >> lingpanda101 via samba <samba at lists.samba.org> wrote:
> >>
> >>> On 12/8/2017 1:50 PM, Rowland Penny via samba wrote:
> >>>> On Fri, 8 Dec 2017 12:27:30 -0600
> >>>> Taylor Hammerling via samba <samba at
lists.samba.org> wrote:
> >>>>
> >>>>> Will do, thanks!
> >>>>>
> >>>> Specifically, go here:
> >>>>
https://github.com/thctlo/samba4/blob/master/samba-setup-checkup.sh
> >>>>
> >>>> Download and run the script and then look at the output,
you can
> >>>> send the output direct to me if needed and I will see if I
can
> >>>> spot any problems.
> >>>>
> >>>> Rowland
> >>>>
> >>>>
> >>> Rowland,
> >>>
> >>>       Decided to run your script for giggles and I receive a
error
> >>>
> >>> ./samba-setup-checkup.sh: line 89: [: too many arguments
> >>>
> >>>
> >> Funnily enough, so do I ;-)
> >>
> >> it isn't my script, it is Louis's, but I had some input
and it
> >> looks like I will be having some more.
> >>
> >> To be continued.......
> >>
> >> Rowland
> >>
> >> --
> >> To unsubscribe from this list go to the following URL and read the
> >> instructions:  https://lists.samba.org/mailman/options/samba
> >>
> >
> >
> Rowland,
> 
>      Ran again with updated script. Fixed initial error. I will
> preface with my OS is Ubuntu 14.05.5 LTS. This script should still
> work, no?
> 
> I did notice I had a error in my resolv.conf. It had details
> pertaining to another server. Must of mixed up my SSH window. Fixed
> and ran again but threw an error with my /etc/krb.conf.conf file. Not
> really an error but a change I knew I made to it.
> 
> dns_lookup_realm = true
> 
> I reverted the change just to satisfy the script, but it continues to 
> report the prior discrepancy I believe.
> 
> Incorrect '/etc/krb5.conf' file.
> Expected:
> [libdefaults]
>          default_realm = DOMAIN.LOCAL
>          dns_lookup_realm = false
>          dns_lookup_kdc = true
> 
> Got:
> [libdefaults]
>          default_realm = DOMAIN.LOCAL
>          dns_lookup_realm = false
>          dns_lookup_kdc = true
> 
> Is their a cache I'm not aware of because these two look identical
> now? I then get a legitimate error
No, there isn't a cache, it reads /etc/krb5.conf every time the script
is run. The two files do seem identical, but the script checks if the
file exists, checks how many lines (should be 4), is there a
'[libdefaults]' line, what REALM is being used, is
'lookup_realm' set
to 'false' and is 'lookup_kdc' set to 'true', the
krb5.conf should only
be displayed if at least one of these is incorrect.
> 
> ldb: unable to stat module /usr/lib/x86_64-linux-gnu/samba/ldb : No
> such file or directory
> 
> I didn't have samba-dsdb-modules installed. It isn't necessary for
a
> proper install of Samba I believe but only for the purposes of this 
> script? I went and installed anyways, but I was greeted with another 
> error I don't know how to proceed.
This must be coming from a 'samba-tool' command and the
'samba-tool'
commands should only be run a DC and you need ALL the samba packages.
> Is this supposed to be a debian only script from Louis? If so my 
> apologizes for wasting your time.
Well, Louis wrote the original script for debian, but I use Devuan and
there is little in the script that relies on debian, mostly it is just
'what is this script running on' ;-)

Rowland

Hai James, 

Can you try this one for me. I corrected and uploaded my latest version. 

https://raw.githubusercontent.com/thctlo/samba4/master/samba-setup-checkup.sh  

You can wget this one directly. 
You should see ( my sample output ) 

sudo bash samba-setup-checkup.sh
Check hostnames : Ok
Checking detected host ipnumbers from resolv.conf and default gateway
Ping gateway ip : 192.168.1.1 : Ok
ping nameserver3: 8.8.8.8 : Ok
Check ping google dns : 8.8.8.8 : Ok
Checking file owner..
-rw-r--r-- root root     /etc/samba/smb.conf
Checking file owner..
-rw-r--r-- root root     /etc/samba/lmhosts
Checking file owner..
Missing file /etc/samba/smbpasswd
drwxr-xr-x root root     /usr/bin
drwxr-xr-x root root     /var/cache/samba
drwxr-xr-x root root     /usr/lib/x86_64-linux-gnu
drwxr-xr-x root root     /var/run/samba
drwxr-x--- root adm      /var/log/samba
drwxr-xr-x root root     /usr/lib/x86_64-linux-gnu/samba
drwxr-xr-x root root     /var/run/samba
drwxr-xr-x root root     /var/lib/samba/private
drwxr-xr-x root root     /usr/sbin
drwxr-xr-x root root     /var/lib/samba
DCS dc1.internal.example.com
dc2.internal.example.com
DC1 dc1.internal.example.com
DC2 dc2.internal.example.com
Samba AD DC info:             =  detected (command and where to look)
This server hostname          = dc1 (hostname -s and /etc/hosts and DNS server)
This server FQDN (hostname)   = dc1.internal.example.com (hostname -f and
/etc/hosts and DNS server)
This server primary dnsdomain = internal.example.com (hostname -d and
/etc/resolv.conf and DNS server)
This server IP address(ses)   = 192.168.1.211  Only one interface detected
(hostname -i (-I) and /etc/networking/interfaces and DNS server
The DC with FSMO roles        = dc1 (samba-tool fsmo show)
The DC (with FSMO) Site name  = Default-First-Site-Name (samba-tool fsmo show)
The Default Naming Context    = DC=rotterdam,DC=bazuin,DC=nl (samba-tool fsmo
show)
The Kerberos REALM name used  = internal.example.com    (kinit and
/etc/krb5.conf and resolving)
The Ipadres of DC dc1.internal.example.com        = 192.168.1.1
The Ipadres of DC dc2.internal.example.com        = 192.168.1.2
SAMBA_SERVER_ROLE: active directory domain controller
SAMBA_SERVER_SERVICES: s3fs, rpc, nbt, wrepl, ldap, cldap, kdc, drepl, winbindd,
ntp_signd, kcc, dnsupdate
SAMBA_DCERPC_ENDPOINT_SERVERS: epmapper, wkssvc, rpcecho, samr, netlogon,
lsarpc, drsuapi, dssetup, unixinfo, browser, eventlog6, backupkey, dnsserver


And Beter again...  :-P 

Greetz, 

Louis

> -----Oorspronkelijk bericht-----
> Van: samba [mailto:samba-bounces at lists.samba.org] Namens 
> Rowland Penny via samba
> Verzonden: maandag 11 december 2017 16:20
> Aan: samba at lists.samba.org
> Onderwerp: Re: [Samba] DNS issue with clean install of samba 
> 4.5.12-Debian
> 
> On Mon, 11 Dec 2017 08:51:01 -0500
> lingpanda101 via samba <samba at lists.samba.org> wrote:
> 
> > On 12/8/2017 2:54 PM, Taylor Hammerling via samba wrote:
> > > Glad you guys replied, here is my output :D
> > >
> > > root at dc1:~# ./samba-setup-checkup.sh
> > > Check hostnames : Ok
> > > ./samba-setup-checkup.sh: line 89: [: too many arguments
> > > Checking detected host ipnumbers from resolv.conf and default
> > > gateway Ping gateway ip : 172.28.0.1 : Ok
> > > ping nameserver1: 172.28.255.49 : Ok
> > > ping nameserver2: 172.28.0.1 : Ok
> > > Check ping google dns : 8.8.8.8 : Ok
> > > root at dc1:~#
> > >
> > >
> > > so, everything looks good except for the part that bombs out :D
> > >
> > > On Fri, Dec 8, 2017 at 1:43 PM, Rowland Penny via samba <
> > > samba at lists.samba.org> wrote:
> > >
> > >> On Fri, 8 Dec 2017 14:25:19 -0500
> > >> lingpanda101 via samba <samba at lists.samba.org>
wrote:
> > >>
> > >>> On 12/8/2017 1:50 PM, Rowland Penny via samba wrote:
> > >>>> On Fri, 8 Dec 2017 12:27:30 -0600
> > >>>> Taylor Hammerling via samba <samba at
lists.samba.org> wrote:
> > >>>>
> > >>>>> Will do, thanks!
> > >>>>>
> > >>>> Specifically, go here:
> > >>>> 
> https://github.com/thctlo/samba4/blob/master/samba-setup-checkup.sh
> > >>>>
> > >>>> Download and run the script and then look at the 
> output, you can
> > >>>> send the output direct to me if needed and I will see
if I can
> > >>>> spot any problems.
> > >>>>
> > >>>> Rowland
> > >>>>
> > >>>>
> > >>> Rowland,
> > >>>
> > >>>       Decided to run your script for giggles and I 
> receive a error
> > >>>
> > >>> ./samba-setup-checkup.sh: line 89: [: too many arguments
> > >>>
> > >>>
> > >> Funnily enough, so do I ;-)
> > >>
> > >> it isn't my script, it is Louis's, but I had some
input and it
> > >> looks like I will be having some more.
> > >>
> > >> To be continued.......
> > >>
> > >> Rowland
> > >>
> > >> --
> > >> To unsubscribe from this list go to the following URL 
> and read the
> > >> instructions:  https://lists.samba.org/mailman/options/samba
> > >>
> > >
> > >
> > Rowland,
> > 
> >      Ran again with updated script. Fixed initial error. I will
> > preface with my OS is Ubuntu 14.05.5 LTS. This script should still
> > work, no?
> > 
> > I did notice I had a error in my resolv.conf. It had details
> > pertaining to another server. Must of mixed up my SSH window. Fixed
> > and ran again but threw an error with my /etc/krb.conf.conf 
> file. Not
> > really an error but a change I knew I made to it.
> > 
> > dns_lookup_realm = true
> > 
> > I reverted the change just to satisfy the script, but it 
> continues to 
> > report the prior discrepancy I believe.
> > 
> > Incorrect '/etc/krb5.conf' file.
> > Expected:
> > [libdefaults]
> >          default_realm = DOMAIN.LOCAL
> >          dns_lookup_realm = false
> >          dns_lookup_kdc = true
> > 
> > Got:
> > [libdefaults]
> >          default_realm = DOMAIN.LOCAL
> >          dns_lookup_realm = false
> >          dns_lookup_kdc = true
> > 
> > Is their a cache I'm not aware of because these two look identical
> > now? I then get a legitimate error
> 
> No, there isn't a cache, it reads /etc/krb5.conf every time the script
> is run. The two files do seem identical, but the script checks if the
> file exists, checks how many lines (should be 4), is there a
> '[libdefaults]' line, what REALM is being used, is
'lookup_realm' set
> to 'false' and is 'lookup_kdc' set to 'true', the
krb5.conf
> should only
> be displayed if at least one of these is incorrect.
> 
> > 
> > ldb: unable to stat module /usr/lib/x86_64-linux-gnu/samba/ldb : No
> > such file or directory
> > 
> > I didn't have samba-dsdb-modules installed. It isn't 
> necessary for a 
> > proper install of Samba I believe but only for the purposes of this 
> > script? I went and installed anyways, but I was greeted 
> with another 
> > error I don't know how to proceed.
> 
> This must be coming from a 'samba-tool' command and the
'samba-tool'
> commands should only be run a DC and you need ALL the samba packages.
> 
> > Is this supposed to be a debian only script from Louis? If so my 
> > apologizes for wasting your time.
> 
> Well, Louis wrote the original script for debian, but I use Devuan and
> there is little in the script that relies on debian, mostly it is just
> 'what is this script running on' ;-)
> 
> Rowland
> 
> 
> -- 
> To unsubscribe from this list go to the following URL and read the
> instructions:  https://lists.samba.org/mailman/options/samba
> 
>

On 12/11/2017 11:03 AM, L.P.H. van Belle via samba
wrote:
> Hai James,
>
> Can you try this one for me. I corrected and uploaded my latest version.
>
>
https://raw.githubusercontent.com/thctlo/samba4/master/samba-setup-checkup.sh
>
> You can wget this one directly.
> You should see ( my sample output )
>
> sudo bash samba-setup-checkup.sh
> Check hostnames : Ok
> Checking detected host ipnumbers from resolv.conf and default gateway
> Ping gateway ip : 192.168.1.1 : Ok
> ping nameserver3: 8.8.8.8 : Ok
> Check ping google dns : 8.8.8.8 : Ok
> Checking file owner..
> -rw-r--r-- root root     /etc/samba/smb.conf
> Checking file owner..
> -rw-r--r-- root root     /etc/samba/lmhosts
> Checking file owner..
> Missing file /etc/samba/smbpasswd
> drwxr-xr-x root root     /usr/bin
> drwxr-xr-x root root     /var/cache/samba
> drwxr-xr-x root root     /usr/lib/x86_64-linux-gnu
> drwxr-xr-x root root     /var/run/samba
> drwxr-x--- root adm      /var/log/samba
> drwxr-xr-x root root     /usr/lib/x86_64-linux-gnu/samba
> drwxr-xr-x root root     /var/run/samba
> drwxr-xr-x root root     /var/lib/samba/private
> drwxr-xr-x root root     /usr/sbin
> drwxr-xr-x root root     /var/lib/samba
> DCS dc1.internal.example.com
> dc2.internal.example.com
> DC1 dc1.internal.example.com
> DC2 dc2.internal.example.com
> Samba AD DC info:             =  detected (command and where to look)
> This server hostname          = dc1 (hostname -s and /etc/hosts and DNS
server)
> This server FQDN (hostname)   = dc1.internal.example.com (hostname -f and
/etc/hosts and DNS server)
> This server primary dnsdomain = internal.example.com (hostname -d and
/etc/resolv.conf and DNS server)
> This server IP address(ses)   = 192.168.1.211  Only one interface detected
(hostname -i (-I) and /etc/networking/interfaces and DNS server
> The DC with FSMO roles        = dc1 (samba-tool fsmo show)
> The DC (with FSMO) Site name  = Default-First-Site-Name (samba-tool fsmo
show)
> The Default Naming Context    = DC=rotterdam,DC=bazuin,DC=nl (samba-tool
fsmo show)
> The Kerberos REALM name used  = internal.example.com    (kinit and
/etc/krb5.conf and resolving)
> The Ipadres of DC dc1.internal.example.com        = 192.168.1.1
> The Ipadres of DC dc2.internal.example.com        = 192.168.1.2
> SAMBA_SERVER_ROLE: active directory domain controller
> SAMBA_SERVER_SERVICES: s3fs, rpc, nbt, wrepl, ldap, cldap, kdc, drepl,
winbindd, ntp_signd, kcc, dnsupdate
> SAMBA_DCERPC_ENDPOINT_SERVERS: epmapper, wkssvc, rpcecho, samr, netlogon,
lsarpc, drsuapi, dssetup, unixinfo, browser, eventlog6, backupkey, dnsserver
>
>
> And Beter again...  :-P
>
> Greetz,
>
> Louis
>
>
>> -----Oorspronkelijk bericht-----
>> Van: samba [mailto:samba-bounces at lists.samba.org] Namens
>> Rowland Penny via samba
>> Verzonden: maandag 11 december 2017 16:20
>> Aan: samba at lists.samba.org
>> Onderwerp: Re: [Samba] DNS issue with clean install of samba
>> 4.5.12-Debian
>>
>> On Mon, 11 Dec 2017 08:51:01 -0500
>> lingpanda101 via samba <samba at lists.samba.org> wrote:
>>
>>> On 12/8/2017 2:54 PM, Taylor Hammerling via samba wrote:
>>>> Glad you guys replied, here is my output :D
>>>>
>>>> root at dc1:~# ./samba-setup-checkup.sh
>>>> Check hostnames : Ok
>>>> ./samba-setup-checkup.sh: line 89: [: too many arguments
>>>> Checking detected host ipnumbers from resolv.conf and default
>>>> gateway Ping gateway ip : 172.28.0.1 : Ok
>>>> ping nameserver1: 172.28.255.49 : Ok
>>>> ping nameserver2: 172.28.0.1 : Ok
>>>> Check ping google dns : 8.8.8.8 : Ok
>>>> root at dc1:~#
>>>>
>>>>
>>>> so, everything looks good except for the part that bombs out :D
>>>>
>>>> On Fri, Dec 8, 2017 at 1:43 PM, Rowland Penny via samba <
>>>> samba at lists.samba.org> wrote:
>>>>
>>>>> On Fri, 8 Dec 2017 14:25:19 -0500
>>>>> lingpanda101 via samba <samba at lists.samba.org>
wrote:
>>>>>
>>>>>> On 12/8/2017 1:50 PM, Rowland Penny via samba wrote:
>>>>>>> On Fri, 8 Dec 2017 12:27:30 -0600
>>>>>>> Taylor Hammerling via samba <samba at
lists.samba.org> wrote:
>>>>>>>
>>>>>>>> Will do, thanks!
>>>>>>>>
>>>>>>> Specifically, go here:
>>>>>>>
>> https://github.com/thctlo/samba4/blob/master/samba-setup-checkup.sh
>>>>>>> Download and run the script and then look at the
>> output, you can
>>>>>>> send the output direct to me if needed and I will
see if I can
>>>>>>> spot any problems.
>>>>>>>
>>>>>>> Rowland
>>>>>>>
>>>>>>>
>>>>>> Rowland,
>>>>>>
>>>>>>        Decided to run your script for giggles and I
>> receive a error
>>>>>> ./samba-setup-checkup.sh: line 89: [: too many
arguments
>>>>>>
>>>>>>
>>>>> Funnily enough, so do I ;-)
>>>>>
>>>>> it isn't my script, it is Louis's, but I had some
input and it
>>>>> looks like I will be having some more.
>>>>>
>>>>> To be continued.......
>>>>>
>>>>> Rowland
>>>>>
>>>>> --
>>>>> To unsubscribe from this list go to the following URL
>> and read the
>>>>> instructions: 
https://lists.samba.org/mailman/options/samba
>>>>>
>>>>
>>> Rowland,
>>>
>>>       Ran again with updated script. Fixed initial error. I will
>>> preface with my OS is Ubuntu 14.05.5 LTS. This script should still
>>> work, no?
>>>
>>> I did notice I had a error in my resolv.conf. It had details
>>> pertaining to another server. Must of mixed up my SSH window. Fixed
>>> and ran again but threw an error with my /etc/krb.conf.conf
>> file. Not
>>> really an error but a change I knew I made to it.
>>>
>>> dns_lookup_realm = true
>>>
>>> I reverted the change just to satisfy the script, but it
>> continues to
>>> report the prior discrepancy I believe.
>>>
>>> Incorrect '/etc/krb5.conf' file.
>>> Expected:
>>> [libdefaults]
>>>           default_realm = DOMAIN.LOCAL
>>>           dns_lookup_realm = false
>>>           dns_lookup_kdc = true
>>>
>>> Got:
>>> [libdefaults]
>>>           default_realm = DOMAIN.LOCAL
>>>           dns_lookup_realm = false
>>>           dns_lookup_kdc = true
>>>
>>> Is their a cache I'm not aware of because these two look
identical
>>> now? I then get a legitimate error
>> No, there isn't a cache, it reads /etc/krb5.conf every time the
script
>> is run. The two files do seem identical, but the script checks if the
>> file exists, checks how many lines (should be 4), is there a
>> '[libdefaults]' line, what REALM is being used, is
'lookup_realm' set
>> to 'false' and is 'lookup_kdc' set to 'true',
the krb5.conf
>> should only
>> be displayed if at least one of these is incorrect.
>>
>>> ldb: unable to stat module /usr/lib/x86_64-linux-gnu/samba/ldb : No
>>> such file or directory
>>>
>>> I didn't have samba-dsdb-modules installed. It isn't
>> necessary for a
>>> proper install of Samba I believe but only for the purposes of this
>>> script? I went and installed anyways, but I was greeted
>> with another
>>> error I don't know how to proceed.
>> This must be coming from a 'samba-tool' command and the
'samba-tool'
>> commands should only be run a DC and you need ALL the samba packages.
>>
>>> Is this supposed to be a debian only script from Louis? If so my
>>> apologizes for wasting your time.
>> Well, Louis wrote the original script for debian, but I use Devuan and
>> there is little in the script that relies on debian, mostly it is just
>> 'what is this script running on' ;-)
>>
>> Rowland
>>
>>
>> -- 
>> To unsubscribe from this list go to the following URL and read the
>> instructions:  https://lists.samba.org/mailman/options/samba
>>
>>
>
Louis,

     Still receiving this error.

./samba-setup-checkup.sh: line 87: [: too many arguments

I then get this error

Checking file owner..
Missing file /usr/local/samba/private/smbpasswd

Followed by this error

drwxr-xr-x root root     /usr/local/samba/var/locks
ERROR(<type 'exceptions.AttributeError'>): uncaught exception - 
'NoneType' object has no attribute 'canonical_str'

   File "/usr/lib/python2.7/dist-packages/samba/netcmd/__init__.py", 
line 175, in _run
     return self.run(*args, **kwargs)
   File "/usr/lib/python2.7/dist-packages/samba/netcmd/fsmo.py", line 
415, in run
     forest_dn = samba.dn_from_dns_name(samdb.forest_dns_name())
   File "/usr/lib/python2.7/dist-packages/samba/samdb.py", line 655,
in
forest_dns_name
     return forest_dn.canonical_str().split('/')[0]


Everything else completes as normal.



-- 
--
James

Hai Mike, 

I post it to the list so everybody can learn from it. 
> Why you use "hostname -i" ?
man hostname wil tell.. But i'll try to explain it a bit. 
Read the Description, its also about how the hostnames are resolved within the
systemfuntions.
Like gethostname and gethostbyname 
> root at ad51:~# hostname -i
> 127.0.0.1
> root at ad51:~# hostname -I
> 172.16.214.151 
Hostname -i , works only if the hostname can be resolved. 
Hostname -I , Displays all network addresses of the host. ( but not 127.0.0.1 ) 
Now remembering that. 

Imo, hostname -i and hostname -I should imo not resolve to
localhost/127.0.0.1/::1
If thats the case then your resolving might be faulty. 

What is localhost. 
localhost = 127.0.0.1
localhost = ::1 
Localhost.localdomain = 127.0.0.1
ip6-localhost ip6-loopback = ::1 

Last, but this one should be in the DNS zone. 
localhost.primary.domain.tld = 127.0.0.1

The following. 
/etc/hostname contains name of the machine, as known to applications that run
locally.

/etc/hosts and DNS associate names with IP?addresses. 
And myname may be mapped to whichever IP?address the machine can access itself,
but mapping it to 127.0.0.1 is unæsthetic.
Not /etc/hosts, but /bin/hostname serves another function with -f because
/etc/hosts can override the common sense.


Now per example. 

A good /etc/hosts = (empty)  but then you must have a dns server running. 
A minimal /etc/hosts only has :
127.0.0.1       localhost
::1		    localhost ip6-localhost ip6-loopback

And as extra with dhcp (optional) 
127.0.1.1       hostname hostname.localdomain 
Or 
127.0.0.1       localhost hostname hostname.localdomain ( not recommended ) 

Or bit more. 
192.168.0.1		computername.internal.domain.tld
1.2.3.4		computername.domain.tld

Basicly any FQDN must be resolvable where it is used.

Now a practical use, like a webserver. 
Lets say you have this in /etc/hosts 
127.0.0.1       localhost
::1		    localhost ip6-localhost ip6-loopback
192.168.0.1		computername.internal.domain.tld
1.2.3.4		computername.domain.tld

In this case i setup a minimal of 4 ! Virtual hosts. 
vhost1: localhost with the ipv6 aliases and ip numbers. 
Vhost2: computername.internal.domain.tld and no alias to ipnumbers, optional
alias to hostname, but the resolv.conf must me correct also with the primary
domain.
Vhost3: computername.domain.tld and no alias to ipnumbers. 
Vhost4: 1.2.3.4 as catch all for scriptkiddies that scan ipnumbers, with a page
saying use hostnames.
Optional
Vhost5: 192.168.0.1 as catch all for in lan side or add the ip to vhost2. 

With such a setup you can split everything there you want to access it, and you
can setup you server much more secure with some basic steps.
But thats how i see it, there might be better ways, but this works very good for
me.

I hope this helps a bit. 

Greetz, 

Louis


> -----Oorspronkelijk bericht-----
> Van: Mike Lykov [mailto:combr at samges.ru] 
> Verzonden: vrijdag 15 december 2017 8:47
> Aan: L.P.H. van Belle
> Onderwerp: Re: [Samba] DNS issue with clean install of samba 
> 4.5.12-Debian
> 
> 11.12.2017 20:03, L.P.H. van Belle via samba ??????????:
> > Hai James,
> > 
> > Can you try this one for me. I corrected and uploaded my 
> latest version.
> > 
> > 
> https://raw.githubusercontent.com/thctlo/samba4/master/samba-s
etup-checkup.sh
> > 
> > You can wget this one directly.
> > You should see ( my sample output )
> 
> Why you use "hostname -i" ?
> 
> " Display the network address(es) of the host name. Note that 
> this works 
> only if the host name can be resolved. Avoid using this option; use 
> hostname -I instead. "
> 
>      HOST_IP1="$(hostname -i)"
>      HOST_IP2="$(hostname -I)"
>      if [ $HOST_IP1 = $HOST_IP2 ]; then
> ....
> 
> With one interface  (+default lo interface) It is writing about
> 	echo "TODO, not finished"
>          echo "Detected multiple ipnumbers"
> 
> beacuse
> 
> root at ad51:~# hostname -i
> 127.0.0.1
> root at ad51:~# hostname -I
> 172.16.214.151
> 
> -- 
> Administrator
> 
>