Willem de Bruijn
2017-Oct-13 15:51 UTC
[PATCH net-next] virtio_net: implement VIRTIO_CONFIG_S_NEEDS_RESET
From: Willem de Bruijn <willemb at google.com> Implement the reset communication request defined in the VIRTIO 1.0 specification and introduces in Linux in commit c00bbcf862896 ("virtio: add VIRTIO_CONFIG_S_NEEDS_RESET device status bit"). Use the virtnet_reset function introduced in commit 2de2f7f40ef9 ("virtio_net: XDP support for adjust_head"). That was removed in commit 4941d472bf95 ("virtio-net: do not reset during XDP set"), because no longer used. Bring it back, minus the xdp specific code. Before tearing down any state, virtnet_freeze_down quiesces the device with netif_tx_disable. virtnet_reset also ensures that no other config operations can run concurrently. On successful reset, the host can observe that the flag has been cleared. There is no need for the explicit control flag introduced in the previous RFC of this patch. Changes RFC -> v1 - drop VIRTIO_NET_CTRL_RESET_ACK message - drop VIRTIO_F_CAN_RESET flag to notify guest support Signed-off-by: Willem de Bruijn <willemb at google.com> --- drivers/net/virtio_net.c | 48 ++++++++++++++++++++++++++++++++++++++++++++---- 1 file changed, 44 insertions(+), 4 deletions(-) diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c index fc059f193e7d..8e768b54844f 100644 --- a/drivers/net/virtio_net.c +++ b/drivers/net/virtio_net.c @@ -1903,13 +1903,14 @@ static const struct ethtool_ops virtnet_ethtool_ops = { .set_link_ksettings = virtnet_set_link_ksettings, }; -static void virtnet_freeze_down(struct virtio_device *vdev) +static void virtnet_freeze_down(struct virtio_device *vdev, bool in_config) { struct virtnet_info *vi = vdev->priv; int i; - /* Make sure no work handler is accessing the device */ - flush_work(&vi->config_work); + /* Make sure no other work handler is accessing the device */ + if (!in_config) + flush_work(&vi->config_work); netif_device_detach(vi->dev); netif_tx_disable(vi->dev); @@ -1924,6 +1925,7 @@ static void virtnet_freeze_down(struct virtio_device *vdev) } static int init_vqs(struct virtnet_info *vi); +static void remove_vq_common(struct virtnet_info *vi); static int virtnet_restore_up(struct virtio_device *vdev) { @@ -1952,6 +1954,40 @@ static int virtnet_restore_up(struct virtio_device *vdev) return err; } +static int virtnet_reset(struct virtnet_info *vi) +{ + struct virtio_device *dev = vi->vdev; + int ret; + + virtio_config_disable(dev); + dev->failed = dev->config->get_status(dev) & VIRTIO_CONFIG_S_FAILED; + virtnet_freeze_down(dev, true); + remove_vq_common(vi); + + virtio_add_status(dev, VIRTIO_CONFIG_S_ACKNOWLEDGE); + virtio_add_status(dev, VIRTIO_CONFIG_S_DRIVER); + + ret = virtio_finalize_features(dev); + if (ret) + goto err; + + ret = virtnet_restore_up(dev); + if (ret) + goto err; + + ret = virtnet_set_queues(vi, vi->curr_queue_pairs); + if (ret) + goto err; + + virtio_add_status(dev, VIRTIO_CONFIG_S_DRIVER_OK); + virtio_config_enable(dev); + return 0; + +err: + virtio_add_status(dev, VIRTIO_CONFIG_S_FAILED); + return ret; +} + static int virtnet_set_guest_offloads(struct virtnet_info *vi, u64 offloads) { struct scatterlist sg; @@ -2136,6 +2172,10 @@ static void virtnet_config_changed_work(struct work_struct *work) virtnet_ack_link_announce(vi); } + if (vi->vdev->config->get_status(vi->vdev) & + VIRTIO_CONFIG_S_NEEDS_RESET) + virtnet_reset(vi); + /* Ignore unknown (future) status bits */ v &= VIRTIO_NET_S_LINK_UP; @@ -2756,7 +2796,7 @@ static __maybe_unused int virtnet_freeze(struct virtio_device *vdev) struct virtnet_info *vi = vdev->priv; virtnet_cpu_notif_remove(vi); - virtnet_freeze_down(vdev); + virtnet_freeze_down(vdev, false); remove_vq_common(vi); return 0; -- 2.15.0.rc0.271.g36b669edcc-goog
Michael S. Tsirkin
2017-Oct-15 00:45 UTC
[PATCH net-next] virtio_net: implement VIRTIO_CONFIG_S_NEEDS_RESET
On Fri, Oct 13, 2017 at 11:51:40AM -0400, Willem de Bruijn wrote:> From: Willem de Bruijn <willemb at google.com> > > Implement the reset communication request defined in the VIRTIO 1.0 > specification and introduces in Linux in commit c00bbcf862896 ("virtio: > add VIRTIO_CONFIG_S_NEEDS_RESET device status bit"). > > Use the virtnet_reset function introduced in commit 2de2f7f40ef9 > ("virtio_net: XDP support for adjust_head"). That was removed in > commit 4941d472bf95 ("virtio-net: do not reset during XDP set"), > because no longer used. Bring it back, minus the xdp specific code. > > Before tearing down any state, virtnet_freeze_down quiesces the > device with netif_tx_disable. virtnet_reset also ensures that no > other config operations can run concurrently. > > On successful reset, the host can observe that the flag has been > cleared. There is no need for the explicit control flag introduced > in the previous RFC of this patch. > > Changes > RFC -> v1 > - drop VIRTIO_NET_CTRL_RESET_ACK message > - drop VIRTIO_F_CAN_RESET flag to notify guest support > > Signed-off-by: Willem de Bruijn <willemb at google.com> > --- > drivers/net/virtio_net.c | 48 ++++++++++++++++++++++++++++++++++++++++++++---- > 1 file changed, 44 insertions(+), 4 deletions(-) > > diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c > index fc059f193e7d..8e768b54844f 100644 > --- a/drivers/net/virtio_net.c > +++ b/drivers/net/virtio_net.c > @@ -1903,13 +1903,14 @@ static const struct ethtool_ops virtnet_ethtool_ops = { > .set_link_ksettings = virtnet_set_link_ksettings, > }; > > -static void virtnet_freeze_down(struct virtio_device *vdev) > +static void virtnet_freeze_down(struct virtio_device *vdev, bool in_config) > { > struct virtnet_info *vi = vdev->priv; > int i; > > - /* Make sure no work handler is accessing the device */ > - flush_work(&vi->config_work); > + /* Make sure no other work handler is accessing the device */ > + if (!in_config) > + flush_work(&vi->config_work); > > netif_device_detach(vi->dev); > netif_tx_disable(vi->dev); > @@ -1924,6 +1925,7 @@ static void virtnet_freeze_down(struct virtio_device *vdev) > } > > static int init_vqs(struct virtnet_info *vi); > +static void remove_vq_common(struct virtnet_info *vi); > > static int virtnet_restore_up(struct virtio_device *vdev) > { > @@ -1952,6 +1954,40 @@ static int virtnet_restore_up(struct virtio_device *vdev) > return err; > } > > +static int virtnet_reset(struct virtnet_info *vi) > +{ > + struct virtio_device *dev = vi->vdev; > + int ret; > + > + virtio_config_disable(dev); > + dev->failed = dev->config->get_status(dev) & VIRTIO_CONFIG_S_FAILED; > + virtnet_freeze_down(dev, true); > + remove_vq_common(vi); > + > + virtio_add_status(dev, VIRTIO_CONFIG_S_ACKNOWLEDGE); > + virtio_add_status(dev, VIRTIO_CONFIG_S_DRIVER); > + > + ret = virtio_finalize_features(dev); > + if (ret) > + goto err; > + > + ret = virtnet_restore_up(dev); > + if (ret) > + goto err; > + > + ret = virtnet_set_queues(vi, vi->curr_queue_pairs); > + if (ret) > + goto err; > + > + virtio_add_status(dev, VIRTIO_CONFIG_S_DRIVER_OK); > + virtio_config_enable(dev); > + return 0; > + > +err: > + virtio_add_status(dev, VIRTIO_CONFIG_S_FAILED); > + return ret; > +} > + > static int virtnet_set_guest_offloads(struct virtnet_info *vi, u64 offloads) > { > struct scatterlist sg;I have a question here though. How do things like MAC address get restored? What about the rx mode? vlans? Also, it seems that LINK_ANNOUNCE requests will get ignored even if they got set before the reset, leading to downtime.> @@ -2136,6 +2172,10 @@ static void virtnet_config_changed_work(struct work_struct *work) > virtnet_ack_link_announce(vi); > } > > + if (vi->vdev->config->get_status(vi->vdev) & > + VIRTIO_CONFIG_S_NEEDS_RESET) > + virtnet_reset(vi); > + > /* Ignore unknown (future) status bits */ > v &= VIRTIO_NET_S_LINK_UP; > > @@ -2756,7 +2796,7 @@ static __maybe_unused int virtnet_freeze(struct virtio_device *vdev) > struct virtnet_info *vi = vdev->priv; > > virtnet_cpu_notif_remove(vi); > - virtnet_freeze_down(vdev); > + virtnet_freeze_down(vdev, false); > remove_vq_common(vi); > > return 0; > -- > 2.15.0.rc0.271.g36b669edcc-goog
Willem de Bruijn
2017-Oct-16 15:03 UTC
[PATCH net-next] virtio_net: implement VIRTIO_CONFIG_S_NEEDS_RESET
>> +static int virtnet_reset(struct virtnet_info *vi) >> +{ >> + struct virtio_device *dev = vi->vdev; >> + int ret; >> + >> + virtio_config_disable(dev); >> + dev->failed = dev->config->get_status(dev) & VIRTIO_CONFIG_S_FAILED; >> + virtnet_freeze_down(dev, true); >> + remove_vq_common(vi); >> + >> + virtio_add_status(dev, VIRTIO_CONFIG_S_ACKNOWLEDGE); >> + virtio_add_status(dev, VIRTIO_CONFIG_S_DRIVER); >> + >> + ret = virtio_finalize_features(dev); >> + if (ret) >> + goto err; >> + >> + ret = virtnet_restore_up(dev); >> + if (ret) >> + goto err; >> + >> + ret = virtnet_set_queues(vi, vi->curr_queue_pairs); >> + if (ret) >> + goto err; >> + >> + virtio_add_status(dev, VIRTIO_CONFIG_S_DRIVER_OK); >> + virtio_config_enable(dev); >> + return 0; >> + >> +err: >> + virtio_add_status(dev, VIRTIO_CONFIG_S_FAILED); >> + return ret; >> +} >> + >> static int virtnet_set_guest_offloads(struct virtnet_info *vi, u64 offloads) >> { >> struct scatterlist sg; > > I have a question here though. How do things like MAC address > get restored? > > What about the rx mode? > > vlans?The function as is releases and reinitializes only ring state. Device configuration such as mac and vlan persist across the reset.> Also, it seems that LINK_ANNOUNCE requests will get ignored > even if they got set before the reset, leading to downtime.Do you mean act on VIRTIO_NET_F_GUEST_ANNOUNCE requests? That flag is tested and netdev_notify_peers called before resetting virtio ring state.
Reasonably Related Threads
- [PATCH net-next] virtio_net: implement VIRTIO_CONFIG_S_NEEDS_RESET
- [PATCH net-next] virtio_net: implement VIRTIO_CONFIG_S_NEEDS_RESET
- [PATCH net-next] virtio_net: implement VIRTIO_CONFIG_S_NEEDS_RESET
- [PATCH net-next] virtio_net: implement VIRTIO_CONFIG_S_NEEDS_RESET
- [PATCH net-next] virtio_net: implement VIRTIO_CONFIG_S_NEEDS_RESET