thr3ads.net - Nut upsuser - [Nut-upsuser] Tripplite SMART2200VS with tripplite

If this information is useful, please help other people find it:
Share via:

Larry Fahnoe

2016-May-25 19:43 UTC

[Nut-upsuser] Tripplite SMART2200VS with tripplite_usb: UPS doesn't shut down

Please ignore the previous message as I sent it before it was complete.

Hello,

I have a Tripplite SMART2200VS that isn't being shut down when the nut
master asks it to.  My initial test was simply upsmon -c fsd which did
cause the system to shut down, however the UPS remained on and providing
power to its loads.  Looking in the logs (daemon and syslog) it was not
clear to me that NUT was actually telling the UPS to shut down (I was
expecting to see "Shutting down the UPS ..." in the logs based upon
/etc/init.d/nut-server).  Since I installed from packages rather than
source, and I could see the init scripts had support for the poweroff
command which calls upsdrvctl shutdown, I made the assumption that the
system is probably properly configured, but there may be a communication
issue with the UPS.  (may or may not be a logical assumption)

Next, I provided non-UPS power to the NUT master and shut down all the
loads connected to the UPS.  I then manually issued the shutdown via the
driver (/lib/nut/tripplite_usb -a tripplite -k -DDD) but the UPS still
remained up.  I don't know enough about NUT to debug this completely, but
my hunch is that the problem is with the communication between the driver
and the UPS, I'm just not clear on how to debug further.

Thanks for any additional assistance and insight!

--Larry

NUT master running on Raspberry Pi 3

# cat /etc/os-release
PRETTY_NAME="Raspbian GNU/Linux 8 (jessie)"
NAME="Raspbian GNU/Linux"
VERSION_ID="8"
VERSION="8 (jessie)"
ID=raspbian
ID_LIKE=debian
HOME_URL="http://www.raspbian.org/"
SUPPORT_URL="http://www.raspbian.org/RaspbianForums"
BUG_REPORT_URL="http://www.raspbian.org/RaspbianBugs"

# uname -a
Linux pi 4.4.9-v7+ #884 SMP Fri May 6 17:28:59 BST 2016 armv7l GNU/Linux

# apt list nut* | grep installed
nut/stable,now 2.7.2-4 all [installed]
nut-client/stable,now 2.7.2-4 armhf [installed]
nut-server/stable,now 2.7.2-4 armhf [installed]

# tail -5 /etc/nut/ups.conf
[tripplite]
    driver = tripplite_usb
    port = auto
    desc = "Tripp Lite SMART2200VS"
    product = ".*SMART2200.*"

# /lib/nut/tripplite_usb -DDD -a tripplite
   0.000000     debug level is '3'
   0.003341     Checking device (09AE/0001) (001/004)
   0.014665     - VendorID: 09ae
   0.014721     - ProductID: 0001
   0.014760     - Manufacturer: TRIPP LITE
   0.014799     - Product: TRIPP LITE SMART2200VS
   0.014837     - Serial Number: unknown
   0.014874     - Bus: 001
   0.014911     Trying to match device
   0.015272     Device matches
   0.016162     Detected a UPS: TRIPP LITE/TRIPP LITE SMART2200VS
   0.016267     send_cmd(msg_len=2, type='
   0.117454     Using SMARTPRO protocol (3003)

# date; /lib/nut/tripplite_usb -a tripplite -k -DDD
Wed 25 May 12:51:12 CDT 2016
   0.000000     debug level is '3'
   0.003343     Checking device (09AE/0001) (001/004)
   0.014646     - VendorID: 09ae
   0.014680     - ProductID: 0001
   0.014698     - Manufacturer: TRIPP LITE
   0.014718     - Product: TRIPP LITE SMART2200VS
   0.014738     - Serial Number: unknown
   0.014755     - Bus: 001
   0.014771     Trying to match device
   0.015133     Device matches
   0.016020     Detected a UPS: TRIPP LITE/TRIPP LITE SMART2200VS
   0.016075     Initiating UPS shutdown
   0.016117     soft_shutdown(offdelay=64): N
   0.016137     send_cmd(msg_len=4, type='N')
   2.117586     send_cmd(msg_len=2, type='G')
   3.219418     libusb_get_interrupt: Connection timed out
   3.219474     libusb_get_interrupt() returned 0 instead of 8 while
sending 3a 47 b8 0d 00 00 00 00 '.G......'
   4.219593     libusb_get_interrupt: Connection timed out
   4.219661     libusb_get_interrupt() returned 0 instead of 8 while
sending 3a 47 b8 0d 00 00 00 00 '.G......'

The UPS never shut down.

Excerpts from the syslog from when I issued the upsmon -c fsd command:

May 24 18:01:57 pi upsmon[996]: Signal 10: User requested FSD
May 24 18:01:57 pi upsd[992]: Client upsmon at 127.0.0.1 set FSD on UPS
[tripplite]
May 24 18:01:57 pi upsmon[996]: Executing automatic power-fail shutdown
May 24 18:01:57 pi upsmon[996]: Auto logout and shutdown proceeding
May 24 18:02:01 pi CRON[2147]: (root) CMD (if test -x /usr/sbin/apticron;
then /usr/sbin/apticron --cron; else true; fi)
May 24 18:02:02 pi systemd[1]: Starting Delayed Shutdown Service...
May 24 18:02:02 pi systemd[1]: Started Delayed Shutdown Service.
May 24 18:02:02 pi systemd-shutdownd[2157]: Shutting down at Tue 2016-05-24
18:02:02 UTC (poweroff)...
May 24 18:02:02 pi systemd-shutdownd[2157]: Creating /run/nologin, blocking
further logins...
May 24 18:02:02 pi systemd[1]: Started Synchronise Hardware Clock to System
Clock.
May 24 18:02:02 pi systemd[1]: Started Turns off Raspberry Pi display
backlight on shutdown/reboot.
[...]
May 24 18:02:02 pi systemd[1]: Stopping Multi-User System.
May 24 18:02:02 pi systemd[1]: Stopped target Multi-User System.
May 24 18:02:02 pi systemd[1]: Stopping Regular background program
processing daemon...
May 24 18:02:02 pi systemd[1]: Stopping OpenBSD Secure Shell server...
May 24 18:02:02 pi systemd[1]: Stopping Network UPS Tools - power devices
information server...
May 24 18:02:02 pi systemd[1]: Service nut-driver.service is not needed
anymore. Stopping.
May 24 18:02:02 pi systemd[1]: Stopping Login Prompts.
May 24 18:02:02 pi systemd[1]: Stopped target Login Prompts.
May 24 18:02:02 pi systemd[1]: Stopping Getty on tty1...
May 24 18:02:02 pi systemd[1]: Stopping Login Service...
May 24 18:02:02 pi systemd[1]: Stopping LSB: exim Mail Transport Agent...
May 24 18:02:02 pi bluetoothd[592]: Terminating
May 24 18:02:02 pi bluetoothd[592]: Stopping SDP server
May 24 18:02:02 pi bluetoothd[592]: Exit
May 24 18:02:02 pi upsd[992]: mainloop: Interrupted system call
May 24 18:02:02 pi upsd[992]: Signal 15: exiting


-- 
Larry Fahnoe, Fahnoe Technology Consulting, fahnoe at FahnoeTech.com
           Minneapolis, Minnesota       www.FahnoeTech.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20160525/f4a33f32/attachment-0001.html>

Charles Lepple

2016-May-26 00:20 UTC

head link

[Nut-upsuser] Tripplite SMART2200VS with tripplite_usb: UPS doesn't shut down

On May 25, 2016, at 3:43 PM, Larry Fahnoe wrote:> 
>    0.016075     Initiating UPS shutdown
>    0.016117     soft_shutdown(offdelay=64): N
>    0.016137     send_cmd(msg_len=4, type='N')
The delay command ('N') was sent successfully, so the UPS is receiving
commands.
>    2.117586     send_cmd(msg_len=2, type='G')
>    3.219418     libusb_get_interrupt: Connection timed out
>    3.219474     libusb_get_interrupt() returned 0 instead of 8 while
sending 3a 47 b8 0d 00 00 00 00 '.G......'
>    4.219593     libusb_get_interrupt: Connection timed out
>    4.219661     libusb_get_interrupt() returned 0 instead of 8 while
sending 3a 47 b8 0d 00 00 00 00 '.G......'
Is the unit on line power at this point? I don't think we know the command
needed to power off the UPS when it is not running on battery (the 'G'
command seems to be "wait for power to return"). I suspect we could
emulate it with the watchdog, but that will require a fair amount of testing to
make sure we understand the timer.

https://github.com/networkupstools/nut/blob/master/drivers/tripplite_usb.c#L675

As a result, the last entry in the FAQ will apply:
http://networkupstools.org/docs/FAQ.html

-- 
Charles Lepple
clepple at gmail

Larry Fahnoe

2016-May-26 01:42 UTC

head link

[Nut-upsuser] Tripplite SMART2200VS with tripplite_usb: UPS doesn't shut down

>
> >    2.117586     send_cmd(msg_len=2, type='G')
> >    3.219418     libusb_get_interrupt: Connection timed out
> >    3.219474     libusb_get_interrupt() returned 0 instead of 8 while
> sending 3a 47 b8 0d 00 00 00 00 '.G......'
> >    4.219593     libusb_get_interrupt: Connection timed out
> >    4.219661     libusb_get_interrupt() returned 0 instead of 8 while
> sending 3a 47 b8 0d 00 00 00 00 '.G......'
> Is the unit on line power at this point?

Yes, the UPS is on line power and the NUT master is not powered by the UPS
for the test. The libusb_get_interrupt() messages continued well past the
64 second timeout.

I don't think we know the command needed to power off the UPS when it
is> not running on battery (the 'G' command seems to be "wait for
power to
> return"). I suspect we could emulate it with the watchdog, but that
will
> require a fair amount of testing to make sure we understand the timer.

So the current NUT can't cause this UPS to power off the load while it is
on line power, correct?  I will update the nut-server init script with the
sleep/reboot logic per FAQ #51.

My larger concern is testing the UPS to ensure it shuts down correctly and
comes back up correctly as well.  My concern is driven by my observation
that with older versions of NUT using the tripplite_usb driver, this UPS
has *not* correctly shut down while on battery, thus the batteries drained
and the UPS never supplied load power once line power had been restored.  I
assume the next logical test would be to do the same test
(/lib/nut/tripplite_usb -a tripplite -k -DDD) while the UPS is on battery?

Are the serial drivers any better at this sort of thing than the USB driver
for these older Tripplite UPS systems?
--Larry

On Wed, May 25, 2016 at 7:20 PM, Charles Lepple <clepple at gmail.com>
wrote:
> On May 25, 2016, at 3:43 PM, Larry Fahnoe wrote:
> >
> >    0.016075     Initiating UPS shutdown
> >    0.016117     soft_shutdown(offdelay=64): N
> >    0.016137     send_cmd(msg_len=4, type='N')
>
> The delay command ('N') was sent successfully, so the UPS is
receiving
> commands.
>
> >    2.117586     send_cmd(msg_len=2, type='G')
> >    3.219418     libusb_get_interrupt: Connection timed out
> >    3.219474     libusb_get_interrupt() returned 0 instead of 8 while
> sending 3a 47 b8 0d 00 00 00 00 '.G......'
> >    4.219593     libusb_get_interrupt: Connection timed out
> >    4.219661     libusb_get_interrupt() returned 0 instead of 8 while
> sending 3a 47 b8 0d 00 00 00 00 '.G......'
>
> Is the unit on line power at this point? I don't think we know the
command
> needed to power off the UPS when it is not running on battery (the
'G'
> command seems to be "wait for power to return"). I suspect we
could emulate
> it with the watchdog, but that will require a fair amount of testing to
> make sure we understand the timer.
>
>
>
https://github.com/networkupstools/nut/blob/master/drivers/tripplite_usb.c#L675
>
> As a result, the last entry in the FAQ will apply:
> http://networkupstools.org/docs/FAQ.html
>
> --
> Charles Lepple
> clepple at gmail
>
>
>
>

-- 
Larry Fahnoe, Fahnoe Technology Consulting, fahnoe at FahnoeTech.com
           Minneapolis, Minnesota       www.FahnoeTech.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20160525/9001e311/attachment.html>

Apparently Analagous Threads

Search for more apparently analagous threads

Nut upsuser - May 2016 - Tripplite SMART2200VS with tripplite_usb: UPS doesn't shut down

[Nut-upsuser] Tripplite SMART2200VS with tripplite_usb: UPS doesn't shut down

[Nut-upsuser] Tripplite SMART2200VS with tripplite_usb: UPS doesn't shut down

[Nut-upsuser] Tripplite SMART2200VS with tripplite_usb: UPS doesn't shut down

Apparently Analagous Threads