search for: smart2200v

Hello, I have a Tripplite SMART2200VS that isn't being shut down when the nut master asks it to. My initial test was simply upsmon -c fsd which caused the system to shut down, but the UPS remained on and providing power to its loads. Looking in the logs (daemon and syslog) it was not clear to me that NUT was telling the UPS to s...

Please ignore the previous message as I sent it before it was complete. Hello, I have a Tripplite SMART2200VS that isn't being shut down when the nut master asks it to. My initial test was simply upsmon -c fsd which did cause the system to shut down, however the UPS remained on and providing power to its loads. Looking in the logs (daemon and syslog) it was not clear to me that NUT was actually tell...

On May 25, 2016, at 3:43 PM, Larry Fahnoe wrote: > > 0.016075 Initiating UPS shutdown > 0.016117 soft_shutdown(offdelay=64): N > 0.016137 send_cmd(msg_len=4, type='N') The delay command ('N') was sent successfully, so the UPS is receiving commands. > 2.117586 send_cmd(msg_len=2, type='G') > 3.219418

On May 25, 2016, at 9:42 PM, Larry Fahnoe <fahnoe at fahnoetech.com> wrote: > > So the current NUT can't cause this UPS to power off the load while it is on line power, correct? I will update the nut-server init script with the sleep/reboot logic per FAQ #51. Correct. > My larger concern is testing the UPS to ensure it shuts down correctly and comes back up correctly as

> > > 2.117586 send_cmd(msg_len=2, type='G') > > 3.219418 libusb_get_interrupt: Connection timed out > > 3.219474 libusb_get_interrupt() returned 0 instead of 8 while > sending 3a 47 b8 0d 00 00 00 00 '.G......' > > 4.219593 libusb_get_interrupt: Connection timed out > > 4.219661 libusb_get_interrupt() returned

...0.145778 PhyMax = 0, PhyMin = 0, LogMax = 65535, LogMin = 0 > 0.155952 Report[set]: (3 bytes) => 0f 00 54 > 0.155981 Set report succeeded > 0.155986 instcmd: SUCCEED > When you attempted the shutdown.return, was the UPS powered or on battery? My older Tripplite SMART2200VS won't shutdown.return unless it is running off of batteries. When I did try shutdown.return with the UPS powered, the tripplite_usb driver showed a similar pattern of "libusb_get_interrupt: Connection timed out" messages. > Every 2 sec driver outputs the following: > 10.25...

...Min = 0, LogMax = 65535, LogMin = 0 > 0.155952 Report[set]: (3 bytes) => 0f 00 54 > 0.155981 Set report succeeded > 0.155986 instcmd: SUCCEED > > > When you attempted the shutdown.return, was the UPS powered or on > battery? My older Tripplite SMART2200VS won't shutdown.return unless > it is running off of batteries. When I did try shutdown.return with > the UPS powered, the tripplite_usb driver showed a similar pattern of > "libusb_get_interrupt: Connection timed out" messages. UPS was powered. Actually, inverter of thi...

...ter)" NAME="Raspbian GNU/Linux" VERSION_CODENAME=buster ########### /etc/nut/nut.conf ########### MODE=netserver ########### /etc/nut/ups.conf ########### maxretry = 3 [ups] driver = tripplite_usb port = auto desc = "Tripp Lite SMART2200VS" product = ".*SMART2200.*" ########### /etc/nut/upsd.conf ########### LISTEN 0 3493 ########### /etc/nut/upsd.users ########### [admin] password = *<PASSWORD-1>* actions = SET instcmds = ALL [upsmon] password...

Roger, I get 4.3.8(1)-release There was good reason, BTW, for the script to NOT fine the journal script on my machine. I had not downloaded it yet. On 7/14/2019 9:06 AM, Roger Price wrote: > On Sun, 14 Jul 2019, David White wrote: > >> ... I saw nothing that looked like a problem with the report save the >> sections <scriptname> "Cannot access <scriptname>.

i have a OMNIVS1500XL i have used nut for several years on a full sized pc with no problems i am trying to get nut working with this ups on a raspberry pi i tried with a pi 3b running raspbian stretch i tried with a pi 3b running raspbian buster i tried plugging the usb cable straight into the pi i tried using a powered usb hub i tried rebuilding nut from the source package all caused the pi to

Hello. Not listed as supported, so here is some info, [root at vhost ~]# /usr/sbin/usbhid-ups -DD -a powercom Network UPS Tools - Generic HID driver 0.38 (2.7.2) USB communication driver 0.32 0.000000 debug level is '2' 0.001318 upsdrv_initups... 0.074753 Checking device (0529/0001) (003/002) 0.074835 Failed to open device, skipping. (Permission denied)