I am running asterisk 13.1.0 In pjsip.conf, the endpoint section has an aors and an auth field. I can name the auth field anything I want. The key is to set the auth=field accordingly. However, when I try this with the aors field, it never works. It seems I have to name the aors=field to match the name of the endpoint section. Is this correct? Would there ever be a need for multiple aors to a single endpoint? Since the field is named aors, I thought this would be possible. How would I do this if I have to name the aor the name of the endpoint? This fails... [transport1] type = transport bind = 0.0.0.0 protocol = udp [aor3] type = aor max_contacts = 1 remove_existing = yes [auth3] type = auth username = 1003 password = Password [1003] type = endpoint context = Test transport = transport1 auth = auth3 aors = aor3 dtmf_mode = inband device_state_busy_at = 1 disallow = all allow = ulaw This succeeds... [transport1] type = transport bind = 0.0.0.0 protocol = udp [1003] type = aor max_contacts = 1 remove_existing = yes [auth3] type = auth username = 1003 password = Password [1003] type = endpoint context = Test transport = transport1 auth = auth3 aors = 1003 dtmf_mode = inband device_state_busy_at = 1 disallow = all allow = ulaw -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20150401/0964dba9/attachment.html>
I don't know why you have issues using different names. I have multiple AORs assigned to a single endpoint and it works fine. I have to admit that my AORs do contain the endpoint name, though. For example, for endpoint "myswitch" I have two AORs, "myswitch_1" and "myswitch_2", and I assign them to the endpoint with aors=myswitch_1,myswitch_2. When you say that the first example fails, what specifically fails? Do the PJSIP modules load but then you get an error when trying to dial to an endpoint, or maybe receive a call from one? On Wed, Apr 1, 2015 at 2:53 PM Dan Cropp <dan at amtelco.com> wrote:> I am running asterisk 13.1.0 > > > > In pjsip.conf, the endpoint section has an aors and an auth field. > > > > I can name the auth field anything I want. The key is to set the > auth=field accordingly. > > However, when I try this with the aors field, it never works. It seems I > have to name the aors=field to match the name of the endpoint section. > > > > Is this correct? > > > > Would there ever be a need for multiple aors to a single endpoint? Since > the field is named aors, I thought this would be possible. How would I do > this if I have to name the aor the name of the endpoint? > > > > This fails... > > > > [transport1] > > type = transport > > bind = 0.0.0.0 > > protocol = udp > > > > [aor3] > > type = aor > > max_contacts = 1 > > remove_existing = yes > > > > [auth3] > > type = auth > > username = 1003 > > password = Password > > > > [1003] > > type = endpoint > > context = Test > > transport = transport1 > > auth = auth3 > > aors = aor3 > > dtmf_mode = inband > > device_state_busy_at = 1 > > disallow = all > > allow = ulaw > > > > > > This succeeds... > > > > [transport1] > > type = transport > > bind = 0.0.0.0 > > protocol = udp > > > > [1003] > > type = aor > > max_contacts = 1 > > remove_existing = yes > > > > [auth3] > > type = auth > > username = 1003 > > password = Password > > > > [1003] > > type = endpoint > > context = Test > > transport = transport1 > > auth = auth3 > > aors = 1003 > > dtmf_mode = inband > > device_state_busy_at = 1 > > disallow = all > > allow = ulaw > > > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > New to Asterisk? Join us for a live introductory webinar every Thurs: > http://www.asterisk.org/hello > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users-------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20150401/4dddc5a4/attachment.html>
I just realized that you are asking about dynamic AORs, not static Contacts in an AOR. That may be the difference. I have never actually tried giving a dynamic AOR a different name. And you wouldn't want more than one dynamic AOR, you'd just use an AOR that allowed more than 1 contact. On Wed, Apr 1, 2015 at 2:59 PM Trey Hilyard <kctrey at gmail.com> wrote:> I don't know why you have issues using different names. I have multiple > AORs assigned to a single endpoint and it works fine. I have to admit that > my AORs do contain the endpoint name, though. For example, for endpoint > "myswitch" I have two AORs, "myswitch_1" and "myswitch_2", and I assign > them to the endpoint with aors=myswitch_1,myswitch_2. > > When you say that the first example fails, what specifically fails? Do the > PJSIP modules load but then you get an error when trying to dial to an > endpoint, or maybe receive a call from one? > > On Wed, Apr 1, 2015 at 2:53 PM Dan Cropp <dan at amtelco.com> wrote: > >> I am running asterisk 13.1.0 >> >> >> >> In pjsip.conf, the endpoint section has an aors and an auth field. >> >> >> >> I can name the auth field anything I want. The key is to set the >> auth=field accordingly. >> >> However, when I try this with the aors field, it never works. It seems I >> have to name the aors=field to match the name of the endpoint section. >> >> >> >> Is this correct? >> >> >> >> Would there ever be a need for multiple aors to a single endpoint? Since >> the field is named aors, I thought this would be possible. How would I do >> this if I have to name the aor the name of the endpoint? >> >> >> >> This fails... >> >> >> >> [transport1] >> >> type = transport >> >> bind = 0.0.0.0 >> >> protocol = udp >> >> >> >> [aor3] >> >> type = aor >> >> max_contacts = 1 >> >> remove_existing = yes >> >> >> >> [auth3] >> >> type = auth >> >> username = 1003 >> >> password = Password >> >> >> >> [1003] >> >> type = endpoint >> >> context = Test >> >> transport = transport1 >> >> auth = auth3 >> >> aors = aor3 >> >> dtmf_mode = inband >> >> device_state_busy_at = 1 >> >> disallow = all >> >> allow = ulaw >> >> >> >> >> >> This succeeds... >> >> >> >> [transport1] >> >> type = transport >> >> bind = 0.0.0.0 >> >> protocol = udp >> >> >> >> [1003] >> >> type = aor >> >> max_contacts = 1 >> >> remove_existing = yes >> >> >> >> [auth3] >> >> type = auth >> >> username = 1003 >> >> password = Password >> >> >> >> [1003] >> >> type = endpoint >> >> context = Test >> >> transport = transport1 >> >> auth = auth3 >> >> aors = 1003 >> >> dtmf_mode = inband >> >> device_state_busy_at = 1 >> >> disallow = all >> >> allow = ulaw >> >> >> -- >> _____________________________________________________________________ >> -- Bandwidth and Colocation Provided by http://www.api-digital.com -- >> New to Asterisk? Join us for a live introductory webinar every Thurs: >> http://www.asterisk.org/hello >> >> asterisk-users mailing list >> To UNSUBSCRIBE or update options visit: >> http://lists.digium.com/mailman/listinfo/asterisk-users > >-------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20150401/0ccab0b7/attachment.html>
Dan Cropp wrote:> I am running asterisk 13.1.0 > > In pjsip.conf, the endpoint section has an aors and an auth field. > > I can name the auth field anything I want. The key is to set the > auth=field accordingly. > > However, when I try this with the aors field, it never works. It seems I > have to name the aors=field to match the name of the endpoint section. > > Is this correct? > > Would there ever be a need for multiple aors to a single endpoint? Since > the field is named aors, I thought this would be possible. How would I > do this if I have to name the aor the name of the endpoint?Whether you have to name it the same or not is up to the SIP client registering. Some allow you to specify the AOR you are registering against. Some assume that the username you are authenticating as is the same as your AOR. Cheers, -- Joshua Colp Digium, Inc. | Senior Software Developer 445 Jan Davis Drive NW - Huntsville, AL 35806 - US Check us out at: www.digium.com & www.asterisk.org
Thanks Joshua. That must be it. I'm using PhonerLite and a Cisco SPA504G phone. Have a great day! -----Original Message----- From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Joshua Colp Sent: Wednesday, April 01, 2015 3:07 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] PJSIP Endpoint AOR question Dan Cropp wrote:> I am running asterisk 13.1.0 > > In pjsip.conf, the endpoint section has an aors and an auth field. > > I can name the auth field anything I want. The key is to set the > auth=field accordingly. > > However, when I try this with the aors field, it never works. It seems > I have to name the aors=field to match the name of the endpoint section. > > Is this correct? > > Would there ever be a need for multiple aors to a single endpoint? > Since the field is named aors, I thought this would be possible. How > would I do this if I have to name the aor the name of the endpoint?Whether you have to name it the same or not is up to the SIP client registering. Some allow you to specify the AOR you are registering against. Some assume that the username you are authenticating as is the same as your AOR. Cheers, -- Joshua Colp Digium, Inc. | Senior Software Developer 445 Jan Davis Drive NW - Huntsville, AL 35806 - US Check us out at: www.digium.com & www.asterisk.org -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Possibly Parallel Threads
- PJSIP Endpoint AOR question
- Question on pjsip.conf and aors
- PJSIP Endpoint AOR question
- Question on pjsip.conf and aors
- Is it possible to have two endpoints to the same IP address where one uses IP based authentication and the other requires asterisk to register to that system?