search for: dtmf_mode

Hey all! I recently tried the dtmf_mode "auto_info" on my setup to support endpoints that only understand SIP INFO as a fallback. My setup is the following: Endpoint A (RFC4733) --> Asterisk <-- Endpoint B (SIP INFO) Both are configured with "auto_info" dtmf_mode in pjsip.conf. What I ran into is, that DTMF...

...each endpoint has some parameter in common so i wonder is there any way to config one for all endpoints? Like in my example I have two endpoints and I repeat the same thing, [100] type=endpoint aors=100 auth=100-auth allow=ulaw,alaw,gsm,g726 context=from-internal callerid=device <100> dtmf_mode=rfc4733 use_avpf=no ice_support=no media_use_received_transport=no trust_id_inbound=yes send_pai=yes rtp_symmetric=yes rewrite_contact=yes message_context=astsms [200] type=endpoint aors=200 auth=200-auth allow=ulaw,alaw,gsm,g726 context=from-internal callerid=device <200> dt...

...name of the endpoint? This fails... [transport1] type = transport bind = 0.0.0.0 protocol = udp [aor3] type = aor max_contacts = 1 remove_existing = yes [auth3] type = auth username = 1003 password = Password [1003] type = endpoint context = Test transport = transport1 auth = auth3 aors = aor3 dtmf_mode = inband device_state_busy_at = 1 disallow = all allow = ulaw This succeeds... [transport1] type = transport bind = 0.0.0.0 protocol = udp [1003] type = aor max_contacts = 1 remove_existing = yes [auth3] type = auth username = 1003 password = Password [1003] type = endpoint context = Test tra...

...is endpoint, but add a new endpoint where we register with them. Existing... [transport1] type = transport bind = 0.0.0.0 protocol = udp [1002] type = aor remove_existing = yes contact = sip:1002 at xxx.xxx.xxx.xxx [1002] type = endpoint context = mycontext transport = transport1 accountcode = 6 dtmf_mode = inband device_state_busy_at = 48 force_rport = no identify_by = username from_user = 1002 disallow = all allow = ulaw acl = acl1 [identify112] type = identify endpoint = 1002 match = 1002 at xxx.xxx.xxx.xxx I setup the registration and the endpoint. [286] type = aor remove_existing = yes conta...

...t;> >> username = 1003 >> >> password = Password >> >> >> >> [1003] >> >> type = endpoint >> >> context = Test >> >> transport = transport1 >> >> auth = auth3 >> >> aors = aor3 >> >> dtmf_mode = inband >> >> device_state_busy_at = 1 >> >> disallow = all >> >> allow = ulaw >> >> >> >> >> >> This succeeds... >> >> >> >> [transport1] >> >> type = transport >> >> bind = 0.0...

...;your public ip address>external_signaling_address=<your public address>* [outbound.vitelity.net] type = aor remove_existing = yes qualify_frequency = 60 contact = sip:64.2.142.93 [outbound.vitelity.net] type = endpoint context = TestApp transport = transport1 aors = outbound.vitelity.net dtmf_mode = rfc4733 force_rport = yes rtp_symmetric = yes rewrite_contact = yes send_rpid = yes trust_id_inbound = yes disallow = all allow = ulaw direct_media = no *from_user=<your main vitelity account name> ; Not subaccount* [outbound.vitelity.net] type = identify endpoint = outbound.vitelity.net...

...ndpoints and I repeat the same thing, >> >> [100] >> >> type=endpoint >> >> aors=100 >> >> auth=100-auth >> >> allow=ulaw,alaw,gsm,g726 >> >> context=from-internal >> >> callerid=device <100> >> >> dtmf_mode=rfc4733 >> >> use_avpf=no >> >> ice_support=no >> >> media_use_received_transport=no >> >> trust_id_inbound=yes >> >> send_pai=yes >> >> rtp_symmetric=yes >> >> rewrite_contact=yes >> >> message_context=...

...ollowing error: [2015-02-02 16:55:56] ERROR[32605] res_sorcery_config.c: Could not create an object of type 'endpoint' with id '192.168.1.3' from configuration file 'pjsip.conf' my endpoint is defined as: [192.168.1.3] type = endpoint transport=simpletrans context = inbound dtmf_mode = inband disallow = all allow = alaw allow = ulaw aors = 192.168.1.3 Thanks, -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20150202/a21adfec/attachment.html>

I have the following configuration... [aor3] type = aor max_contacts = 1 remove_existing = yes [auth3] type = auth username = 1004 password = SuperSecretProbation [1004] type = endpoint context = IS transport = transport1 auth = auth3 aors = aor3 accountcode = 3 dtmf_mode = rfc4733 device_state_busy_at = 2 force_rport = no moh_passthrough = yes disallow = all allow = ulaw acl = acl1 When a register attempt is received, asterisk outputs... [02/14 12:53:29.870] WARNING[7883] res_pjsip_registrar.c: AOR '1004' not found for endpoint '1004' If I change...

...ends_auth = yes sends_registrations = yes accepts_auth = no accepts_registrations = no endpoint/call_group = 1 endpoint/pickup_group = 1 endpoint/accountcode = TOOTAi endpoint/language = fr endpoint/allow = !all,ulaw,alaw,g729 endpoint/context = incoming-Provider endpoint/direct_media = no endpoint/dtmf_mode = inband registration/retry_interval = 20 registration/max_retries = 0 registration/expiration = 3600 registration/transport = transport-udp aor/max_contacts = 2 aor/qualify_frequency = 2000 [Provider](Provider-tootai) ; remote_hosts = sips.provider.eu endpoint/callerid = "TOOTAi" <00...

...tocol = tls bind = 0.0.0.0:5061 cert_file=cert_file priv_key_file=key_file method=tlsv1 external_media_address=X.Y.Z.D external_signaling_address=X.Y.Z.D verify_client=no verify_server=no allow_reload=yes [twilio](!) type=endpoint transport=transport-tls context=from-twilio disallow=all allow=ulaw dtmf_mode=inband media_encryption=sdes rtp_symmetric=yes rewrite_contact=yes force_rport=yes canreinvite=no tlsdontverifyserver=yes [auth-out](!) type=auth auth_type=userpass [twilio] aors=twilio-aors [twilio-aors] type=aor contact=sips:trunkname.pstn.twilio.com:5061 ;tried with sip: also [twilio] type=...

...> remove_existing = yes > > > > [auth3] > > type = auth > > username = 1003 > > password = Password > > > > [1003] > > type = endpoint > > context = Test > > transport = transport1 > > auth = auth3 > > aors = aor3 > > dtmf_mode = inband > > device_state_busy_at = 1 > > disallow = all > > allow = ulaw > > > > > > This succeeds... > > > > [transport1] > > type = transport > > bind = 0.0.0.0 > > protocol = udp > > > > [1003] > > type = aor &g...

...ebug = yes [transport1] type = transport bind = 0.0.0.0 protocol = udp [outbound.vitelity.net] type = aor remove_existing = yes qualify_frequency = 60 contact = sip:outbound.vitelity.net [outbound.vitelity.net] type = endpoint context = TestApp transport = transport1 aors = outbound.vitelity.net dtmf_mode = rfc4733 force_rport = yes rtp_symmetric = yes rewrite_contact = yes send_rpid = yes trust_id_inbound = yes disallow = all allow = ulaw direct_media = no [outbound.vitelity.net] type = identify endpoint = outbound.vitelity.net match = 64.2.142.93 Have a great day! Dan

...this endpoint, but add a new endpoint where we register with them. Existing? [transport1] type = transport bind = 0.0.0.0 protocol = udp [1002] type = aor remove_existing = yes contact = sip:1002 at xxx.xxx.xxx.xxx [1002] type = endpoint context = mycontext transport = transport1 accountcode = 6 dtmf_mode = inband device_state_busy_at = 48 force_rport = no identify_by = username from_user = 1002 disallow = all allow = ulaw acl = acl1 [identify112] type = identify endpoint = 1002 match = 1002 at xxx.xxx.xxx.xxx<mailto:1002 at xxx.xxx.xxx.xxx> Check this first... identify112 probably failed...

...trying to make it work with PJSIP. My pjsip.conf looks like... [transport1] type = transport bind = 0.0.0.0 protocol = udp [3400] type = aor max_contacts = 1 remove_existing = yes contact=sip:xxx.xxx.xxx.xxx [3400] type = endpoint context = DEF transport = transport1 aors = 3400 accountcode = 1 dtmf_mode = inband device_state_busy_at = 32 Dan Cropp Senior Software Engineer, R&D Software Dept. AMTELCO, 4800 Curtin Drive, McFarland, WI 53558-9424 608 838-4197 ext. 291 1-800-238-5275 ext 291 www.amtelco.com<http://www.amtelco.com/> Statement of Confidentiality The contents of this e-mai...

...odify your > pjsip.endpoint_custom.conf and add the message context as in the example > below : > > [100] > > type=endpoint > > aors=100 > > auth=100-auth > > allow=ulaw,alaw,gsm,g726 > > context=from-internal > > callerid=device <100> > > dtmf_mode=rfc4733 > > use_avpf=no > > ice_support=no > > media_use_received_transport=no > > trust_id_inbound=yes > > media_encryption=no > > rtp_symmetric=yes > > rewrite_contact=yes > > *message_context=astsms* > > > > On Tue, Nov 17, 2015 at 8:35...

...t; > type = aor > > remove_existing = yes > > qualify_frequency = 60 > > contact = sip:64.2.142.93 > > > > [outbound.vitelity.net] > > type = endpoint > > context = TestApp > > transport = transport1 > > aors = outbound.vitelity.net > > dtmf_mode = rfc4733 > > force_rport = yes > > rtp_symmetric = yes > > rewrite_contact = yes > > send_rpid = yes > > trust_id_inbound = yes > > disallow = all > > allow = ulaw > > direct_media = no > > > > [outbound.vitelity.net] > > type = ide...

...t; > type = aor > > remove_existing = yes > > qualify_frequency = 60 > > contact = sip:64.2.142.93 > > > > [outbound.vitelity.net] > > type = endpoint > > context = TestApp > > transport = transport1 > > aors = outbound.vitelity.net > > dtmf_mode = rfc4733 > > force_rport = yes > > rtp_symmetric = yes > > rewrite_contact = yes > > send_rpid = yes > > trust_id_inbound = yes > > disallow = all > > allow = ulaw > > direct_media = no > > > > [outbound.vitelity.net] > > type = ide...

Hello, I am looking for documentation support for enabling instant messaging between endpoints using Asterisk 13.1.0 and vanilla VoIP clients such as Zoiper. Where do I enable this support on the server side and does it need anything on the client side? I see plenty of online help for chan_sip, but nothing for chan_pjsip. I imagine there is both pjsip.conf configuration and extensions.conf

...our public address>* > [outbound.vitelity.net] > type = aor > remove_existing = yes > qualify_frequency = 60 > contact = sip:64.2.142.93 > > [outbound.vitelity.net] > type = endpoint > context = TestApp > transport = transport1 > aors = outbound.vitelity.net > dtmf_mode = rfc4733 > force_rport = yes > rtp_symmetric = yes > rewrite_contact = yes > send_rpid = yes > trust_id_inbound = yes > disallow = all > allow = ulaw > direct_media = no > > *from_user=<your main vitelity account name> ; Not subaccount* > > [outbound.vite...