search for: remove_exist

...e a need for multiple aors to a single endpoint? Since the field is named aors, I thought this would be possible. How would I do this if I have to name the aor the name of the endpoint? This fails... [transport1] type = transport bind = 0.0.0.0 protocol = udp [aor3] type = aor max_contacts = 1 remove_existing = yes [auth3] type = auth username = 1003 password = Password [1003] type = endpoint context = Test transport = transport1 auth = auth3 aors = aor3 dtmf_mode = inband device_state_busy_at = 1 disallow = all allow = ulaw This succeeds... [transport1] type = transport bind = 0.0.0.0 protocol...

...configured with a match setting in the endpoint section. All channels coming from that IP address go to this endpoint. They want me to keep this endpoint, but add a new endpoint where we register with them. Existing... [transport1] type = transport bind = 0.0.0.0 protocol = udp [1002] type = aor remove_existing = yes contact = sip:1002 at xxx.xxx.xxx.xxx [1002] type = endpoint context = mycontext transport = transport1 accountcode = 6 dtmf_mode = inband device_state_busy_at = 48 force_rport = no identify_by = username from_user = 1002 disallow = all allow = ulaw acl = acl1 [identify112] type = identi...

...; >> This fails... >> >> >> >> [transport1] >> >> type = transport >> >> bind = 0.0.0.0 >> >> protocol = udp >> >> >> >> [aor3] >> >> type = aor >> >> max_contacts = 1 >> >> remove_existing = yes >> >> >> >> [auth3] >> >> type = auth >> >> username = 1003 >> >> password = Password >> >> >> >> [1003] >> >> type = endpoint >> >> context = Test >> >> transport = tran...

...s=6000 direct_media=no rewrite_contact=yes ; necessary if endpoint does not know/register public ip:port ice_support=no force_rport=yes rtp_symmetric=no media_encryption=sdes [auth6000] type=auth auth_type=userpass password=6000 username=6000 [6000] type=aor qualify_frequency=30 max_contacts=1 remove_existing=yes ;===============EXTENSION 6001 [6001] type=endpoint context=internal disallow=all allow=ulaw auth=auth6001 aors=6001 direct_media=no rewrite_contact=yes ; necessary if endpoint does not know/register public ip:port ice_support=no force_rport=yes rtp_symmetric=no media_encryption=sdes...

...ebug = yes [transport1] type = transport bind = 0.0.0.0 protocol = udp *local_net=<yourlocalnet I.E. 10.10.10.10/24 <http://10.10.10.10/24>>external_media_address=<your public ip address>external_signaling_address=<your public address>* [outbound.vitelity.net] type = aor remove_existing = yes qualify_frequency = 60 contact = sip:64.2.142.93 [outbound.vitelity.net] type = endpoint context = TestApp transport = transport1 aors = outbound.vitelity.net dtmf_mode = rfc4733 force_rport = yes rtp_symmetric = yes rewrite_contact = yes send_rpid = yes trust_id_inbound = yes disallow =...

...text: TestApp Priority: 1 Timeout: 60000 CallerID: John Doe <1234> Variable: CALLERID(num-pres)=allowed_passed_screened Async: true I translated those settings to the following for pjsip.conf... [transport1] type = transport bind = 0.0.0.0 protocol = udp [outbound.vitelity.net] type = aor remove_existing = yes contact = sip:64.2.142.93 at 5060 [outbound.vitelity.net] type = endpoint context = TestApp transport = transport1 aors = outbound.vitelity.net dtmf_mode = rfc4733 force_rport = yes rtp_symmetric = yes rewrite_contact = yes send_rpid = yes trust_id_inbound = yes allow = all direct_media =...

I have the following configuration... [aor3] type = aor max_contacts = 1 remove_existing = yes [auth3] type = auth username = 1004 password = SuperSecretProbation [1004] type = endpoint context = IS transport = transport1 auth = auth3 aors = aor3 accountcode = 3 dtmf_mode = rfc4733 device_state_busy_at = 2 force_rport = no moh_passthrough = yes disallow = all allow = ulaw acl = ac...

...st/meta-data/public-ipv4 external_media_address=<publicIP> external_signaling_address=<publicIP> [endpoint_internal](!) type=endpoint context=from-internal disallow=all allow=ulaw direct_media=no [auth_userpass](!) type=auth auth_type=userpass [aor_dynamic](!) type=aor max_contacts=1 remove_existing=yes ;Definitions for our phones, using the templates above ;; usernames and passwords etc. below My security group configuration allows TCP, UDP posrt 5060 inbound, outbound from/to 0.0.0.0/0 and TCP, UDP ports 10000-20000 from/to 0.0.0.0/0. Should I turn on STUN for my zoiper softphones? An...

...henticate_qualify : false contact : sip:myurl:5060 default_expiration : 3600 mailboxes : max_contacts : 0 maximum_expiration : 7200 minimum_expiration : 60 outbound_proxy : sip:myurl:5060 qualify_frequency : 30 qualify_timeout : 3.000000 remove_existing : false support_path : false So I think that those aors should be qualified automatically when I run Asterisk, but if I do "pjsip show contacts", I get that it was just Created but not qualified: *CLI> pjsip show contacts Contact: <Aor/ContactUri..............

...uld I do > this if I have to name the aor the name of the endpoint? > > > > This fails... > > > > [transport1] > > type = transport > > bind = 0.0.0.0 > > protocol = udp > > > > [aor3] > > type = aor > > max_contacts = 1 > > remove_existing = yes > > > > [auth3] > > type = auth > > username = 1003 > > password = Password > > > > [1003] > > type = endpoint > > context = Test > > transport = transport1 > > auth = auth3 > > aors = aor3 > > dtmf_mode = inband...

...t to outbound.vitelity.net At this point, it seems to be working (and this is going through a Cisco ALG). I will run more tests, but here is the pjsip.conf I have. [global] type = global debug = yes [transport1] type = transport bind = 0.0.0.0 protocol = udp [outbound.vitelity.net] type = aor remove_existing = yes qualify_frequency = 60 contact = sip:outbound.vitelity.net [outbound.vitelity.net] type = endpoint context = TestApp transport = transport1 aors = outbound.vitelity.net dtmf_mode = rfc4733 force_rport = yes rtp_symmetric = yes rewrite_contact = yes send_rpid = yes trust_id_inbound = yes d...

...s configured with a match setting in the endpoint section. All channels coming from that IP address go to this endpoint. They want me to keep this endpoint, but add a new endpoint where we register with them. Existing? [transport1] type = transport bind = 0.0.0.0 protocol = udp [1002] type = aor remove_existing = yes contact = sip:1002 at xxx.xxx.xxx.xxx [1002] type = endpoint context = mycontext transport = transport1 accountcode = 6 dtmf_mode = inband device_state_busy_at = 48 force_rport = no identify_by = username from_user = 1002 disallow = all allow = ulaw acl = acl1 [identify112] type = identi...

...eployment worked. However, every machine where it is a link, Puppet refuses to replace teh link with a regular file or do anything with it. I''ve read the type reference, and I see nothing specific about forcing symlink replacement. I''ve looked at the source, and it seems like remove_existing should be unlinking teh symlink ahead of my new file. But, it isn''t happening. Any suggestions on hwo to do this? File { backup => main, owner => "root", group => $operatingsystem ? { freebsd => "wheel",...

...l Discussion Subject: Re: [asterisk-users] PJSIP configuration question <snip> > > I translated those settings to the following for pjsip.conf... > > [transport1] > type = transport > bind = 0.0.0.0 > protocol = udp > > [outbound.vitelity.net] > type = aor > remove_existing = yes > contact = sip:64.2.142.93 at 5060 This is incorrect. The contact should be: contact = sip:64.2.142.93 It will use a default port of 5060. I also believe I've covered your origination issue in a separate email. Your dial string should be: PJSIP/8005555555 at outbound.vitelity...

Thank you for your note, Scott. I set rewrite_contact=yes for both contacts, and I also had to do remove_existing=yes because I had to remove the existing contact information (max_contacts = 1 was preventing new contact information) using pjsip qualify demo-alice etc., after which the right IP addresses showed in pjsip show endpoints. Anyway, it works as expected now, I think. My pjsip.conf is now [transpo...

...001 direct_media=no rtp_symmetric=yes force_rport=yes allow=alaw allow=speex allow=speex16 allow=speex32 allow=gsm [2001] type=aor qualify_frequency=5000 authenticate_qualify=yes max_contacts=1 remove_existing=yes [2001] type=auth auth_type=userpass password=test username=test Best Regards, Madushan -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20160909/d69c982e/attachme...

...ng? Tell me how to determine the change in the status of the contact (or endpoint/trunk) through AMI? Simple config: [srv_dev] type=auth auth_type=userpass username=login password=secret [srv_dev] type=aor contact=sip:sip.example.com:5060 qualify_frequency=5 default_expiration=10 max_contacts=1 remove_existing=yes [srv_dev] type=endpoint from_domain=example.com aors=srv_dev outbound_auth=srv_dev rewrite_contact=yes allow=!all,alaw Dmitriy Serov

...no nat = no host = xxx.xxx.xxx.xxx incominglimit = 32 accountcode = 1 port = 5060 context = DEF dtmfmode = inband insecure = invite I am trying to make it work with PJSIP. My pjsip.conf looks like... [transport1] type = transport bind = 0.0.0.0 protocol = udp [3400] type = aor max_contacts = 1 remove_existing = yes contact=sip:xxx.xxx.xxx.xxx [3400] type = endpoint context = DEF transport = transport1 aors = 3400 accountcode = 1 dtmf_mode = inband device_state_busy_at = 32 Dan Cropp Senior Software Engineer, R&D Software Dept. AMTELCO, 4800 Curtin Drive, McFarland, WI 53558-9424 608 838-4197...

...are behind the same > NAT? > > > > > > [global] > > type = global > > debug = yes > > > > [transport1] > > type = transport > > bind = 0.0.0.0 > > protocol = udp > > > > [outbound.vitelity.net] > > type = aor > > remove_existing = yes > > qualify_frequency = 60 > > contact = sip:64.2.142.93 > > > > [outbound.vitelity.net] > > type = endpoint > > context = TestApp > > transport = transport1 > > aors = outbound.vitelity.net > > dtmf_mode = rfc4733 > > force_rport...

...he pbx and local endpoints are behind the same NAT? > [global] > > type = global > > debug = yes > > > > [transport1] > > type = transport > > bind = 0.0.0.0 > > protocol = udp > > > > [outbound.vitelity.net] > > type = aor > > remove_existing = yes > > qualify_frequency = 60 > > contact = sip:64.2.142.93 > > > > [outbound.vitelity.net] > > type = endpoint > > context = TestApp > > transport = transport1 > > aors = outbound.vitelity.net > > dtmf_mode = rfc4733 > > force_rport...