Hi,
just testing with a HP R1500 XR (answers as Powerware) with SNMP/Serial
Port Card using SNMP I found:
1st: The batt status 1.3.6.1.4.1.534.1.2.5.0 goes away after some time.
Isn't visible in a snmpwalk anymore, seems to be a bug in the card.
2nd: The ups turns into "resting" 48h after battery is full. It turns
off the fan, the batt voltage lowers a little, it seems, avoiding
permanent charging to increase life time.
3rd: Because the fan is turned off, the ambient temperature rises to 61
?C an decreases lifetime:-)
I had to do some changes in the mibs to get all relevant data:
{ "input.voltage", 0, 1.0, PW_OID_IN_VOLTAGE ".1",
"",
SU_INPUT_1, NULL },
{ "input.current", 0, 0.1, PW_OID_IN_CURRENT ".1",
"",
SU_INPUT_1, NULL },
Must get ".1" there, as it is in output.voltage/current. (The input
current isn't returned, but I think it should be right with .1 there...)
TestBattery misses the .0 at the end:
#define PW_OID_BATTEST_START "1.3.6.1.4.1.534.1.8.1.0"
And by the way, the RFC1628-way of initiating tests works (by hand using
snmpget [SpinLock]/snmpset) with this ups, too.
And I took the ups status from ietf:
{ "ups.status", ST_FLAG_STRING, SU_INFOSIZE, IETF_OID_POWER_STATUS,
"OFF",
SU_STATUS_PWR, &ietf_pwr_info[0] },
because 1.3.6.1.4.1.534.1.4.5.0 isn't answerd by the card.
CU,
Gernot
