Craig Topper via llvm-dev
2016-Nov-23 16:12 UTC
[llvm-dev] RFC: code size reduction in X86 by replacing EVEX with VEX encoding
I would like a command line option to disable this optimization. That way tests can still verify that EVEX instructions came out of isel by using -show-mc-encoding. On Wed, Nov 23, 2016 at 5:01 AM Hal Finkel via llvm-dev < llvm-dev at lists.llvm.org> wrote:> > ------------------------------ > > *From: *"Gadi via llvm-dev Haber" <llvm-dev at lists.llvm.org> > *To: *llvm-dev at lists.llvm.org > *Sent: *Wednesday, November 23, 2016 5:50:42 AM > *Subject: *[llvm-dev] RFC: code size reduction in X86 by replacing EVEX > with VEX encoding > > > > Hi All. > > > > This is an RFC for a proposed target specific X86 optimization for > reducing code size in the encoding of AVX-512 instructions when possible. > > > > When the AVX512F instruction set was introduced in X86 it included > additional 32 registers of 512bit size each ZMM0 - ZMM31, as well as > additional 16 XMM registers XMM16-XMM31 and 16 YMM registers YMM16-YMM31. > > In order to encode the new registers of 16-31 and the additional > instructions, a new encoding prefix called EVEX, which extends the > existing VEX encoding, was introduced as shown below: > > > > The EVEX encoding format: > > EVEX Opcode ModR/M [SIB] [Disp32] / [Disp8*N] [Immediate] > > # of bytes: 4 1 1 1 4 / 1 1 > > > > The existing VEX encoding format: > > [VEX] OPCODE ModR/M [SIB] [DISP] [IMM] > > # of bytes: 0,2,3 1 1 0,1 0,1,2,4 0,1 > > > > Note that the EVEX prefix requires 4 bytes whereas the VEX prefix can take > only up to 3 bytes. > > Consequently, for the SKX architecture, many instructions that use only > the lower registers of XMM0-XMM15 or YMM0-YMM15, can be encoded by either > the EVEX or the VEX format. For such cases, using the VEX encoding results > in a code size reduction of ~2 bytes even though it is compiled with the > AVX512F/AVX512VL features enabled. > > > > For example: “vmovss %xmm0, 32(%rsp,%rax,4)“, has the following 2 > possible encodings: > > > > EVEX encoding (8 bytes long): > > 62 f1 7e 08 11 44 84 08 vmovss %xmm0, 32(%rsp,%rax,4) > > > > VEX encoding (6 bytes long): > > c5 fa 11 44 84 20 vmovss %xmm0, > 32(%rsp,%rax,4) > > > > See reported Bugzilla bugs about this proposed optimization: > > https://llvm.org/bugs/show_bug.cgi?id=23376 > > https://llvm.org/bugs/show_bug.cgi?id=29162 > > > > The proposed optimization implementation is to add a table of all EVEX > opcodes that can be encoded via VEX in a new header file placed under > lib/Target/X86. > > A new pass is to be added at the pre-emit stage. > > It might be better to have TableGen generate the mapping table for you > instead of manually making a table yourself. TableGen has a feature that is > specifically designed to make mapping tables like this. For examples, grep > for InstrMapping in: > > lib/Target/Hexagon/Hexagon.td > lib/Target/Mips/MipsDSPInstrFormats.td > lib/Target/Mips/MipsInstrFormats.td > lib/Target/Mips/Mips32r6InstrFormats.td > lib/Target/PowerPC/PPC.td > lib/Target/AMDGPU/SIInstrInfo.td > lib/Target/AMDGPU/R600Instructions.td > lib/Target/SystemZ/SystemZInstrFormats.td > lib/Target/Lanai/LanaiInstrInfo.td > > I've used this feature a few times in the PowerPC backend, and it's quite > convenient. > > -Hal > > No need for special Opt flags, as it is always better to use the reduced > VEX encoding when possible. > > > > Thank you for any comments or questions that you may have. > > > > Sincerely, > > > > Gadi. > > > > --------------------------------------------------------------------- > Intel Israel (74) Limited > > This e-mail and any attachments may contain confidential material for > the sole use of the intended recipient(s). Any review or distribution > by others is strictly prohibited. If you are not the intended > recipient, please contact the sender and delete all copies. > > _______________________________________________ > LLVM Developers mailing list > llvm-dev at lists.llvm.org > http://lists.llvm.org/cgi-bin/mailman/listinfo/llvm-dev > > > > > -- > Hal Finkel > Lead, Compiler Technology and Programming Languages > Leadership Computing Facility > Argonne National Laboratory > _______________________________________________ > LLVM Developers mailing list > llvm-dev at lists.llvm.org > http://lists.llvm.org/cgi-bin/mailman/listinfo/llvm-dev >-------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.llvm.org/pipermail/llvm-dev/attachments/20161123/31cca6f3/attachment.html>
Haber, Gadi via llvm-dev
2016-Nov-24 07:27 UTC
[llvm-dev] RFC: code size reduction in X86 by replacing EVEX with VEX encoding
Thanx. This makes sense.
Note that there are many tests, mostly under test/CodeGen/X86, that are affected
by this optimization and I had to modify them as they include a check of the
generated encoding.
If we add such a disabling opt flag, should we now keep two sets of tests? One
for the optimization on and one when it is disabled?
Thanx!
Gadi.
From: Craig Topper [mailto:craig.topper at gmail.com]
Sent: Wednesday, November 23, 2016 18:13
To: Haber, Gadi <gadi.haber at intel.com>; Hal Finkel <hfinkel at
anl.gov>
Cc: llvm-dev at lists.llvm.org
Subject: Re: [llvm-dev] RFC: code size reduction in X86 by replacing EVEX with
VEX encoding
I would like a command line option to disable this optimization. That way tests
can still verify that EVEX instructions came out of isel by using
-show-mc-encoding.
On Wed, Nov 23, 2016 at 5:01 AM Hal Finkel via llvm-dev <llvm-dev at
lists.llvm.org<mailto:llvm-dev at lists.llvm.org>> wrote:
________________________________
From: "Gadi via llvm-dev Haber" <llvm-dev at
lists.llvm.org<mailto:llvm-dev at lists.llvm.org>>
To: llvm-dev at lists.llvm.org<mailto:llvm-dev at lists.llvm.org>
Sent: Wednesday, November 23, 2016 5:50:42 AM
Subject: [llvm-dev] RFC: code size reduction in X86 by replacing EVEX with
VEX encoding
Hi All.
This is an RFC for a proposed target specific X86 optimization for reducing code
size in the encoding of AVX-512 instructions when possible.
When the AVX512F instruction set was introduced in X86 it included additional 32
registers of 512bit size each ZMM0 - ZMM31, as well as additional 16 XMM
registers XMM16-XMM31 and 16 YMM registers YMM16-YMM31.
In order to encode the new registers of 16-31 and the additional instructions, a
new encoding prefix called EVEX, which extends the existing VEX encoding, was
introduced as shown below:
The EVEX encoding format:
EVEX Opcode ModR/M [SIB] [Disp32] / [Disp8*N] [Immediate]
# of bytes: 4 1 1 1 4 / 1 1
The existing VEX encoding format:
[VEX] OPCODE ModR/M [SIB] [DISP] [IMM]
# of bytes: 0,2,3 1 1 0,1 0,1,2,4 0,1
Note that the EVEX prefix requires 4 bytes whereas the VEX prefix can take only
up to 3 bytes.
Consequently, for the SKX architecture, many instructions that use only the
lower registers of XMM0-XMM15 or YMM0-YMM15, can be encoded by either the EVEX
or the VEX format. For such cases, using the VEX encoding results in a code size
reduction of ~2 bytes even though it is compiled with the AVX512F/AVX512VL
features enabled.
For example: “vmovss %xmm0, 32(%rsp,%rax,4)“, has the following 2 possible
encodings:
EVEX encoding (8 bytes long):
62 f1 7e 08 11 44 84 08 vmovss %xmm0, 32(%rsp,%rax,4)
VEX encoding (6 bytes long):
c5 fa 11 44 84 20 vmovss %xmm0, 32(%rsp,%rax,4)
See reported Bugzilla bugs about this proposed optimization:
https://llvm.org/bugs/show_bug.cgi?id=23376
https://llvm.org/bugs/show_bug.cgi?id=29162
The proposed optimization implementation is to add a table of all EVEX opcodes
that can be encoded via VEX in a new header file placed under lib/Target/X86.
A new pass is to be added at the pre-emit stage.
It might be better to have TableGen generate the mapping table for you instead
of manually making a table yourself. TableGen has a feature that is specifically
designed to make mapping tables like this. For examples, grep for InstrMapping
in:
lib/Target/Hexagon/Hexagon.td
lib/Target/Mips/MipsDSPInstrFormats.td
lib/Target/Mips/MipsInstrFormats.td
lib/Target/Mips/Mips32r6InstrFormats.td
lib/Target/PowerPC/PPC.td
lib/Target/AMDGPU/SIInstrInfo.td
lib/Target/AMDGPU/R600Instructions.td
lib/Target/SystemZ/SystemZInstrFormats.td
lib/Target/Lanai/LanaiInstrInfo.td
I've used this feature a few times in the PowerPC backend, and it's
quite convenient.
-Hal
No need for special Opt flags, as it is always better to use the reduced VEX
encoding when possible.
Thank you for any comments or questions that you may have.
Sincerely,
Gadi.
---------------------------------------------------------------------
Intel Israel (74) Limited
This e-mail and any attachments may contain confidential material for
the sole use of the intended recipient(s). Any review or distribution
by others is strictly prohibited. If you are not the intended
recipient, please contact the sender and delete all copies.
_______________________________________________
LLVM Developers mailing list
llvm-dev at lists.llvm.org<mailto:llvm-dev at lists.llvm.org>
http://lists.llvm.org/cgi-bin/mailman/listinfo/llvm-dev
--
Hal Finkel
Lead, Compiler Technology and Programming Languages
Leadership Computing Facility
Argonne National Laboratory
_______________________________________________
LLVM Developers mailing list
llvm-dev at lists.llvm.org<mailto:llvm-dev at lists.llvm.org>
http://lists.llvm.org/cgi-bin/mailman/listinfo/llvm-dev
---------------------------------------------------------------------
Intel Israel (74) Limited
This e-mail and any attachments may contain confidential material for
the sole use of the intended recipient(s). Any review or distribution
by others is strictly prohibited. If you are not the intended
recipient, please contact the sender and delete all copies.
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.llvm.org/pipermail/llvm-dev/attachments/20161124/2f927ecf/attachment.html>
Demikhovsky, Elena via llvm-dev
2016-Nov-24 08:20 UTC
[llvm-dev] RFC: code size reduction in X86 by replacing EVEX with VEX encoding
> I would like a command line option to disable this optimization. That way tests can still verify that EVEX instructions came out of isel by using -show-mc-encoding.I think that keeping tests compatibility is not a reason for an additional “llc” flag. We check encoding in test/MC/X86 dir. Is there any option to report-out from llc in non-debug mode? It should be an option to control internals of llc process.. - Elena From: Haber, Gadi Sent: Thursday, November 24, 2016 09:28 To: Craig Topper <craig.topper at gmail.com>; Hal Finkel <hfinkel at anl.gov> Cc: llvm-dev at lists.llvm.org; Demikhovsky, Elena <elena.demikhovsky at intel.com>; Rackover, Zvi <zvi.rackover at intel.com> Subject: RE: [llvm-dev] RFC: code size reduction in X86 by replacing EVEX with VEX encoding Thanx. This makes sense. Note that there are many tests, mostly under test/CodeGen/X86, that are affected by this optimization and I had to modify them as they include a check of the generated encoding. If we add such a disabling opt flag, should we now keep two sets of tests? One for the optimization on and one when it is disabled? Thanx! Gadi. From: Craig Topper [mailto:craig.topper at gmail.com] Sent: Wednesday, November 23, 2016 18:13 To: Haber, Gadi <gadi.haber at intel.com<mailto:gadi.haber at intel.com>>; Hal Finkel <hfinkel at anl.gov<mailto:hfinkel at anl.gov>> Cc: llvm-dev at lists.llvm.org<mailto:llvm-dev at lists.llvm.org> Subject: Re: [llvm-dev] RFC: code size reduction in X86 by replacing EVEX with VEX encoding I would like a command line option to disable this optimization. That way tests can still verify that EVEX instructions came out of isel by using -show-mc-encoding. On Wed, Nov 23, 2016 at 5:01 AM Hal Finkel via llvm-dev <llvm-dev at lists.llvm.org<mailto:llvm-dev at lists.llvm.org>> wrote: ________________________________ From: "Gadi via llvm-dev Haber" <llvm-dev at lists.llvm.org<mailto:llvm-dev at lists.llvm.org>> To: llvm-dev at lists.llvm.org<mailto:llvm-dev at lists.llvm.org> Sent: Wednesday, November 23, 2016 5:50:42 AM Subject: [llvm-dev] RFC: code size reduction in X86 by replacing EVEX with VEX encoding Hi All. This is an RFC for a proposed target specific X86 optimization for reducing code size in the encoding of AVX-512 instructions when possible. When the AVX512F instruction set was introduced in X86 it included additional 32 registers of 512bit size each ZMM0 - ZMM31, as well as additional 16 XMM registers XMM16-XMM31 and 16 YMM registers YMM16-YMM31. In order to encode the new registers of 16-31 and the additional instructions, a new encoding prefix called EVEX, which extends the existing VEX encoding, was introduced as shown below: The EVEX encoding format: EVEX Opcode ModR/M [SIB] [Disp32] / [Disp8*N] [Immediate] # of bytes: 4 1 1 1 4 / 1 1 The existing VEX encoding format: [VEX] OPCODE ModR/M [SIB] [DISP] [IMM] # of bytes: 0,2,3 1 1 0,1 0,1,2,4 0,1 Note that the EVEX prefix requires 4 bytes whereas the VEX prefix can take only up to 3 bytes. Consequently, for the SKX architecture, many instructions that use only the lower registers of XMM0-XMM15 or YMM0-YMM15, can be encoded by either the EVEX or the VEX format. For such cases, using the VEX encoding results in a code size reduction of ~2 bytes even though it is compiled with the AVX512F/AVX512VL features enabled. For example: “vmovss %xmm0, 32(%rsp,%rax,4)“, has the following 2 possible encodings: EVEX encoding (8 bytes long): 62 f1 7e 08 11 44 84 08 vmovss %xmm0, 32(%rsp,%rax,4) VEX encoding (6 bytes long): c5 fa 11 44 84 20 vmovss %xmm0, 32(%rsp,%rax,4) See reported Bugzilla bugs about this proposed optimization: https://llvm.org/bugs/show_bug.cgi?id=23376 https://llvm.org/bugs/show_bug.cgi?id=29162 The proposed optimization implementation is to add a table of all EVEX opcodes that can be encoded via VEX in a new header file placed under lib/Target/X86. A new pass is to be added at the pre-emit stage. It might be better to have TableGen generate the mapping table for you instead of manually making a table yourself. TableGen has a feature that is specifically designed to make mapping tables like this. For examples, grep for InstrMapping in: lib/Target/Hexagon/Hexagon.td lib/Target/Mips/MipsDSPInstrFormats.td lib/Target/Mips/MipsInstrFormats.td lib/Target/Mips/Mips32r6InstrFormats.td lib/Target/PowerPC/PPC.td lib/Target/AMDGPU/SIInstrInfo.td lib/Target/AMDGPU/R600Instructions.td lib/Target/SystemZ/SystemZInstrFormats.td lib/Target/Lanai/LanaiInstrInfo.td I've used this feature a few times in the PowerPC backend, and it's quite convenient. -Hal No need for special Opt flags, as it is always better to use the reduced VEX encoding when possible. Thank you for any comments or questions that you may have. Sincerely, Gadi. --------------------------------------------------------------------- Intel Israel (74) Limited This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). Any review or distribution by others is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies. _______________________________________________ LLVM Developers mailing list llvm-dev at lists.llvm.org<mailto:llvm-dev at lists.llvm.org> http://lists.llvm.org/cgi-bin/mailman/listinfo/llvm-dev -- Hal Finkel Lead, Compiler Technology and Programming Languages Leadership Computing Facility Argonne National Laboratory _______________________________________________ LLVM Developers mailing list llvm-dev at lists.llvm.org<mailto:llvm-dev at lists.llvm.org> http://lists.llvm.org/cgi-bin/mailman/listinfo/llvm-dev --------------------------------------------------------------------- Intel Israel (74) Limited This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). Any review or distribution by others is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies. -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.llvm.org/pipermail/llvm-dev/attachments/20161124/c22fa4e8/attachment-0001.html>
Reasonably Related Threads
- RFC: code size reduction in X86 by replacing EVEX with VEX encoding
- RFC: code size reduction in X86 by replacing EVEX with VEX encoding
- RFC: code size reduction in X86 by replacing EVEX with VEX encoding
- AVX Scheduling and Parallelism
- AVX Scheduling and Parallelism