Hi R users, I have a question about data processing. I have such a dataset, while each black grid cell has a few attributes and the corresponding attribute values. The latitude and longitude of the center of each grid cell are given also. Then I want to average the attribute values from four adjacent grid cells to get the average value for the center of each red grid cell. Thus, there are the same number of attributes, but different values. The red grid cells do not overlap. I was thinking to write such a script that can ID each black grid cell, for example, 1, 2, 3, 4, ..., then the corresponding four grid cells will be used to average for the red grid cell. But I just have the latitude and longitude, attribute values for the black cells, and also latitude and longitude for the red cells, how to write such a script in R. Could anyone give me suggestion about the work flow? Thanks very much. I attached the picture of the grid cells here. -------------- next part -------------- A non-text attachment was scrubbed... Name: gridcell2.pdf Type: application/pdf Size: 320961 bytes Desc: not available URL: <https://stat.ethz.ch/pipermail/r-help/attachments/20180515/82d71ed1/attachment.pdf>
Jim Lemon
2018-May-16 08:45 UTC
[R] How to average values from grid cells with coordinates
Hi lily, There are one or two assumptions to be made here. First is that the latitude and longitude values of the "black" cells are equally spaced as in your illustration. Second, that all latitude and longitude values for the "red" cells fall at the corners of four "black" cells. You can get the four "black" cells by finding the lat/lon values that are closest to the "red" lat/lon values. Here's a basic example: lat<-rep(28:38,11) lon<-rep(98:108,each=11) pop<-sample(80:200,121) blackcells<-list() for(i in 1:121) blackcells[[i]]<-list(lat=lat[i],lon=lon[i],pop=pop[i]) redcell<-list(lat=33.5,lon=100.5,pop=NA) close4<-rep(NA,4) closen<-1 for(i in 1:121) { if(abs(blackcells[[i]]$lat-redcell$lat) < 1 && abs(blackcells[[i]]$lon-redcell$lon) < 1) { close4[closen]<-i closen<-closen+1 } } cat(close4,"\n") redcell$pop<-(blackcells[[close4[1]]]$pop + blackcells[[close4[2]]]$pop + blackcells[[close4[3]]]$pop + blackcells[[close4[4]]]$pop)/4 print(blackcells[[close4[1]]]) print(blackcells[[close4[2]]]) print(blackcells[[close4[3]]]) print(blackcells[[close4[4]]]) print(redcell) As you can see, this has picked out the four "black" cells closest to the "red" cell's coordinates and calculated the mean. Jim On Wed, May 16, 2018 at 2:23 PM, lily li <chocold12 at gmail.com> wrote:> Hi R users, > > I have a question about data processing. I have such a dataset, while each > black grid cell has a few attributes and the corresponding attribute > values. The latitude and longitude of the center of each grid cell are > given also. > > Then I want to average the attribute values from four adjacent grid cells > to get the average value for the center of each red grid cell. Thus, there > are the same number of attributes, but different values. The red grid cells > do not overlap. I was thinking to write such a script that can ID each > black grid cell, for example, 1, 2, 3, 4, ..., then the corresponding four > grid cells will be used to average for the red grid cell. But I just have > the latitude and longitude, attribute values for the black cells, and also > latitude and longitude for the red cells, how to write such a script in R. > Could anyone give me suggestion about the work flow? Thanks very much. > > I attached the picture of the grid cells here. > > ______________________________________________ > R-help at r-project.org mailing list -- To UNSUBSCRIBE and more, see > https://stat.ethz.ch/mailman/listinfo/r-help > PLEASE do read the posting guide http://www.R-project.org/posting-guide.html > and provide commented, minimal, self-contained, reproducible code. >
Hi Jim, Thanks. Yes, the two assumptions are correct, and they reflect the datasets. I have an uncertainty about the code below. Why do you use abs(blackcells[[i]]$lat - redcell$lat) <1 rather than a different number than 1? Second, why to construct blackcells as a list, rather than a dataframe. Because in a dataframe, each row can represent one grid cell, while the three columns can represent the lati, lon, and pop. Thanks again for your help. for(i in 1:121) { if(abs(blackcells[[i]]$lat-redcell$lat) < 1 && abs(blackcells[[i]]$lon-redcell$lon) < 1) { close4[closen]<-i closen<-closen+1 } } On Wed, May 16, 2018 at 2:45 AM, Jim Lemon <drjimlemon at gmail.com> wrote:> Hi lily, > There are one or two assumptions to be made here. First is that the > latitude and longitude values of the "black" cells are equally spaced > as in your illustration. Second, that all latitude and longitude > values for the "red" cells fall at the corners of four "black" cells. > > You can get the four "black" cells by finding the lat/lon values that > are closest to the "red" lat/lon values. Here's a basic example: > > lat<-rep(28:38,11) > lon<-rep(98:108,each=11) > pop<-sample(80:200,121) > blackcells<-list() > for(i in 1:121) blackcells[[i]]<-list(lat=lat[i],lon=lon[i],pop=pop[i]) > redcell<-list(lat=33.5,lon=100.5,pop=NA) > close4<-rep(NA,4) > closen<-1 > for(i in 1:121) { > if(abs(blackcells[[i]]$lat-redcell$lat) < 1 && > abs(blackcells[[i]]$lon-redcell$lon) < 1) { > close4[closen]<-i > closen<-closen+1 > } > } > cat(close4,"\n") > redcell$pop<-(blackcells[[close4[1]]]$pop + > blackcells[[close4[2]]]$pop + blackcells[[close4[3]]]$pop + > blackcells[[close4[4]]]$pop)/4 > print(blackcells[[close4[1]]]) > print(blackcells[[close4[2]]]) > print(blackcells[[close4[3]]]) > print(blackcells[[close4[4]]]) > print(redcell) > > As you can see, this has picked out the four "black" cells closest to > the "red" cell's coordinates and calculated the mean. > > Jim > > On Wed, May 16, 2018 at 2:23 PM, lily li <chocold12 at gmail.com> wrote: > > Hi R users, > > > > I have a question about data processing. I have such a dataset, while > each > > black grid cell has a few attributes and the corresponding attribute > > values. The latitude and longitude of the center of each grid cell are > > given also. > > > > Then I want to average the attribute values from four adjacent grid cells > > to get the average value for the center of each red grid cell. Thus, > there > > are the same number of attributes, but different values. The red grid > cells > > do not overlap. I was thinking to write such a script that can ID each > > black grid cell, for example, 1, 2, 3, 4, ..., then the corresponding > four > > grid cells will be used to average for the red grid cell. But I just have > > the latitude and longitude, attribute values for the black cells, and > also > > latitude and longitude for the red cells, how to write such a script in > R. > > Could anyone give me suggestion about the work flow? Thanks very much. > > > > I attached the picture of the grid cells here. > > > > ______________________________________________ > > R-help at r-project.org mailing list -- To UNSUBSCRIBE and more, see > > https://stat.ethz.ch/mailman/listinfo/r-help > > PLEASE do read the posting guide http://www.R-project.org/ > posting-guide.html > > and provide commented, minimal, self-contained, reproducible code. > > >[[alternative HTML version deleted]]
Jim Lemon
2018-May-19 10:35 UTC
[R] How to average values from grid cells with coordinates
Hi lily, You could also create "blackcells" as a dataframe (which is itself a type of list). I used a list as I thought it would be a more general solution if there were different numbers of values for different grid cells. The use of 1 for the comparison was due to the grid increments being 1. If you had larger or smaller grid increments, you would use the grid increment size for the comparison. That guarantees that only the four nearest "black" cells will be identified as within the "red" cell. Jim On Sat, May 19, 2018 at 4:07 AM, lily li <chocold12 at gmail.com> wrote:> Hi Jim, > > Thanks. Yes, the two assumptions are correct, and they reflect the datasets. > I have an uncertainty about the code below. Why do you use > abs(blackcells[[i]]$lat - redcell$lat) <1 rather than a different number > than 1? Second, why to construct blackcells as a list, rather than a > dataframe. Because in a dataframe, each row can represent one grid cell, > while the three columns can represent the lati, lon, and pop. Thanks again > for your help. > > for(i in 1:121) { > if(abs(blackcells[[i]]$lat-redcell$lat) < 1 && > abs(blackcells[[i]]$lon-redcell$lon) < 1) { > close4[closen]<-i > closen<-closen+1 > } > } > > On Wed, May 16, 2018 at 2:45 AM, Jim Lemon <drjimlemon at gmail.com> wrote: >> >> Hi lily, >> There are one or two assumptions to be made here. First is that the >> latitude and longitude values of the "black" cells are equally spaced >> as in your illustration. Second, that all latitude and longitude >> values for the "red" cells fall at the corners of four "black" cells. >> >> You can get the four "black" cells by finding the lat/lon values that >> are closest to the "red" lat/lon values. Here's a basic example: >> >> lat<-rep(28:38,11) >> lon<-rep(98:108,each=11) >> pop<-sample(80:200,121) >> blackcells<-list() >> for(i in 1:121) blackcells[[i]]<-list(lat=lat[i],lon=lon[i],pop=pop[i]) >> redcell<-list(lat=33.5,lon=100.5,pop=NA) >> close4<-rep(NA,4) >> closen<-1 >> for(i in 1:121) { >> if(abs(blackcells[[i]]$lat-redcell$lat) < 1 && >> abs(blackcells[[i]]$lon-redcell$lon) < 1) { >> close4[closen]<-i >> closen<-closen+1 >> } >> } >> cat(close4,"\n") >> redcell$pop<-(blackcells[[close4[1]]]$pop + >> blackcells[[close4[2]]]$pop + blackcells[[close4[3]]]$pop + >> blackcells[[close4[4]]]$pop)/4 >> print(blackcells[[close4[1]]]) >> print(blackcells[[close4[2]]]) >> print(blackcells[[close4[3]]]) >> print(blackcells[[close4[4]]]) >> print(redcell) >> >> As you can see, this has picked out the four "black" cells closest to >> the "red" cell's coordinates and calculated the mean. >> >> Jim >> >> On Wed, May 16, 2018 at 2:23 PM, lily li <chocold12 at gmail.com> wrote: >> > Hi R users, >> > >> > I have a question about data processing. I have such a dataset, while >> > each >> > black grid cell has a few attributes and the corresponding attribute >> > values. The latitude and longitude of the center of each grid cell are >> > given also. >> > >> > Then I want to average the attribute values from four adjacent grid >> > cells >> > to get the average value for the center of each red grid cell. Thus, >> > there >> > are the same number of attributes, but different values. The red grid >> > cells >> > do not overlap. I was thinking to write such a script that can ID each >> > black grid cell, for example, 1, 2, 3, 4, ..., then the corresponding >> > four >> > grid cells will be used to average for the red grid cell. But I just >> > have >> > the latitude and longitude, attribute values for the black cells, and >> > also >> > latitude and longitude for the red cells, how to write such a script in >> > R. >> > Could anyone give me suggestion about the work flow? Thanks very much. >> > >> > I attached the picture of the grid cells here. >> > >> > ______________________________________________ >> > R-help at r-project.org mailing list -- To UNSUBSCRIBE and more, see >> > https://stat.ethz.ch/mailman/listinfo/r-help >> > PLEASE do read the posting guide >> > http://www.R-project.org/posting-guide.html >> > and provide commented, minimal, self-contained, reproducible code. >> > > >
Jim Lemon
2018-May-20 09:52 UTC
[R] How to average values from grid cells with coordinates
Hi lily, It's not too hard to do it using dataframes. Getting the indexing right is usually that hardest part: # these values are the centers of the black cells lat<-rep(28:38,11) lon<-rep(98:108,each=11) pop<-sample(80:200,121) # just use the data.frame function blackcells<-data.frame(lat=lat,lon=lon,pop=pop) plot(0,type="n",xlim=c(97.5,108.5),ylim=c(27.5,38.5), xlab="Longitude",ylab="Latitude") abline(h=27.5) abline(h=lat+0.5) abline(v=97.5) abline(v=lon+0.5) text(blackcells$lon,blackcells$lat,pop) # the red cells will be centered on the corners of 4 black cells lat2<-rep(seq(28.5,34.5,by=2),4) lon2<-rep(seq(99.5,105.5,by=2),each=4) redcells<-data.frame(lat=lat2,lon=lon2,value=NA) display the red cells rect(lon2-1,lat2-1,lon2+1,lat2+1,border="red",lwd=2) nblackcells<-dim(blackcells)[1] nredcells<-dim(redcells)[1] for(redcell in 1:nredcells) { close4<-rep(NA,4) closen<-1 for(blackcell in 1:nblackcells) { if(abs(blackcells[blackcell,"lat"]-redcells[redcell,"lat"]) < 1 && abs(blackcells[blackcell,"lon"]-redcells[redcell,"lon"]) < 1) { close4[closen]<-blackcells[blackcell,"pop"] closen<-closen + 1 } } cat(close4,"\n") redcells[redcell,"value"]<-sum(close4)/4 } library(plotrix) boxed.labels(redcells$lon,redcells$lat,redcells$value,col="red") Jim
Hi Jim, Thanks. It works. I now have more complex problems. If at each blackcell, there are two variables such as pop and mood. For each variable, there are daily records in one year, so 365 records for pop and 365 records for mood. The averaged values for the redcells should be daily records too. What kind of format do you recommend for this problem? Right now, I just get the latitudes and longitudes into a dataframe. Thanks. On Sun, May 20, 2018 at 3:52 AM, Jim Lemon <drjimlemon at gmail.com> wrote:> Hi lily, > It's not too hard to do it using dataframes. Getting the indexing > right is usually that hardest part: > > # these values are the centers of the black cells > lat<-rep(28:38,11) > lon<-rep(98:108,each=11) > pop<-sample(80:200,121) > # just use the data.frame function > blackcells<-data.frame(lat=lat,lon=lon,pop=pop) > plot(0,type="n",xlim=c(97.5,108.5),ylim=c(27.5,38.5), > xlab="Longitude",ylab="Latitude") > abline(h=27.5) > abline(h=lat+0.5) > abline(v=97.5) > abline(v=lon+0.5) > text(blackcells$lon,blackcells$lat,pop) > # the red cells will be centered on the corners of 4 black cells > lat2<-rep(seq(28.5,34.5,by=2),4) > lon2<-rep(seq(99.5,105.5,by=2),each=4) > redcells<-data.frame(lat=lat2,lon=lon2,value=NA) > display the red cells > rect(lon2-1,lat2-1,lon2+1,lat2+1,border="red",lwd=2) > nblackcells<-dim(blackcells)[1] > nredcells<-dim(redcells)[1] > for(redcell in 1:nredcells) { > close4<-rep(NA,4) > closen<-1 > for(blackcell in 1:nblackcells) { > if(abs(blackcells[blackcell,"lat"]-redcells[redcell,"lat"]) < 1 && > abs(blackcells[blackcell,"lon"]-redcells[redcell,"lon"]) < 1) { > close4[closen]<-blackcells[blackcell,"pop"] > closen<-closen + 1 > } > } > cat(close4,"\n") > redcells[redcell,"value"]<-sum(close4)/4 > } > library(plotrix) > boxed.labels(redcells$lon,redcells$lat,redcells$value,col="red") > > Jim >[[alternative HTML version deleted]]
Possibly Parallel Threads
- How to average values from grid cells with coordinates
- How to average values from grid cells with coordinates
- How to average values from grid cells with coordinates
- How to average values from grid cells with coordinates
- plotting the coordinates versus dates