On Tuesday 08 April 2003 21:42, Micah Anderson wrote:> I have been reading lartc.org for the past few days and am a bit
> overwhelemed by the possibilities and configurations that are
> possible. I am still trying to process all of this to try and
> understand what I need to do in my configuration, and have tried a few
> things to no avail. I currently have a webserver that is completely
> flooding our link, so I need to find a way to deal with this quickly.
> Can someone offer me some guidance in figuring out what I need to do?
>
> My configuration is as follows:
>
> 2.2.20 kernel (with QOS enabled and all shaping stuff on), this
> machine acts as a webserver and is also doing IPFW/MASQ for a small
> network behind it. Interface eth0 is on the internet, eth1 is
> connected to the private network. I would like to limit any traffic
> that originates from the webserver itself so that the masquaraded
> hosts behind it can still function with a certain amount of assured
> bandwidth. The problem of course is that all the masqueraded traffice
> comes through the webserver, so I am not sure how I can shape traffic
> that comes from eth1 to be of higher priority over traffic that
doesn''t.
First of all, upgrade your kernel. The network (and especially the shaping
part of it) is updated a lot in the 2.4.x kernels.
Or was it a typo and are you running 2.4.20 ?
Web-server can be matched based on ports.
Or you can mark the LAN packets entering your box and use that mark after the
natting to shape the traffic.
> I have played with the shaper utility, the wondershaper, and have
> tried my own recipies, all so far with no success. :(
>
> Thanks for any pointers you can offer!
www.docum.org ?
Stef
--
stef.coene@docum.org
"Using Linux as bandwidth manager"
http://www.docum.org/
#lartc @ irc.oftc.net
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/