similar to: Configuration help

Hi ! I´ve been using the wonderful wondershaper from chapter 15.8 of the LARTC Howto for some time. It´s really wonderful. Actually, I use the version from http://freshmeat.net/projects/wshaper/?topic_id=87 Now I tried to put some hosts to low priority, and it doesn´t work. The traffic is splitted equally between the noprio and the other hosts. Is this because I use ip masquerading, and all

Hi group, first of all: I am new to this group and hope to bring in some value later. At the moment I am such a beginner that I will probably of no use to anyone and only be asking stupid questions... I am running a little private linux server with kernel 2.4.21. It serves as a gameserver, webserver and mailserver, mainly. It also does the pppoe connect via a DSL modem to my provider and the NAT

I tried installing the WonderShaper on my internal link, mostly to get the SFQ installed. I set uplink and downlink to 100000 to match the link speed and changed the bandwidth on the cbq line to 100mbit. This killed transfer speed *to* the box, knocking it from 30-40 Mbps down to about 800 kbps. Commenting out just the ingress control restored the speed. What about the ingress policer would do

Sir, Thanks for the wondershaper utility! It has improved the response time for my ssh connections to my home server whenever i need to access it from the Internet. However, is there a way to setup a bandwidth, say 10kbits/sec (i only have 128kbits/sec DSL), and assign it to a particular traffic type like kazaa and other P2P file-sharing? This way it will guarantee that my home users of

Dear list, I have experimented some time now with HTB queues, and have received a lot of help from this list, especially from Stef. Thank you. My currect Shaper looks like this: http://www.designobjekt.de/test/rc.trafficshaper Unfortunately I still experience lags of this type: -players from the internet playing on my server feel lags -I feel lags when I play on a different server on the

Hi - I''ve been going through the LARTC how-to and have successfully used the sample scripts (and wondershaper) with my xDSL links. I''m now faced with the challenge of providing 8 users at work an effective remote access connection over a PSTN ppp connection. The critical traffic in this case relates to our stock enquiry application which is running over terminal services.

Hi All, I''m using iptables-1.2.7a on RedHat8 kernel 2.4.20. I wanted to limit the file-sharing traffic to the internet. I marked the packets with iptables: iptables -A FORWARD -t mangle -p tcp -s 192.168.1.1/24 -d ! 192.168.1.1/24 --dport 1024:1862 -j MARK --set-mark 1 iptables -A FORWARD -t mangle -p tcp -s 192.168.1.1/24 -d ! 192.168.1.1/24 --dport 1864:65535 -j MARK --set-mark 1

Hello! I recently upgraded my computer from Mandrake 8.2 to Mandrake 9.0. I used a very slightly modifed WonderShaper and it worked beautifully. But now when I try to run the same cbq shaping script on Mandrake 9.0 i get this output RTNETLINK answers: Invalid argument RTNETLINK answers: No such file or directory RTNETLINK answers: No such file or directory RTNETLINK answers: No such file or

How to do ensure a class not lended and not borrowed each other. I do cburst burst 0b ,but ctokens tokens go to negative! --------------------------------- Do You Yahoo!? "更多惊喜，同样精彩，NetVista A30 热卖" --0-611462377-1048485942=:33792 Content-Type: text/html; charset=gb2312 Content-Transfer-Encoding: 8bit <P>How to do ensure a class not lended and not borrowed each

Hi Stef, Reffering to page < http://www.docum.org/stef.coene/qos/faq/cache/7.html > I found a para as follows, " CBQ is not always as accurate as it should be. See docum.org on the test page for some tests with bounded classes. The algorithm used by cbq is very "link sensitive". It calculates the link idle time and for that it needs the real link bandwidth, average

Hi! I answer to two messages from this thread (I use digest). lartc-request@mailman.ds9a.nl wrote: > > Message: 3 > Date: Fri, 16 Jul 2004 10:51:37 -0700 (PDT) > From: ibro tj <ibb_linux@yahoo.com> > Subject: Re: [LARTC] QoS for Voip. > To: lartc@mailman.ds9a.nl, alessandro.ren@opservices.com.br > > Hi, > > the hint from Martin A Brown which I am

I''m trying to implement something similar the the diagram in section 9.5.2.1 in the LARTC HOWTO, but must have missed something somewhere :( I''m trying to hack up wondershaper, as it looked like a good place to start.. Here''s where I currently at, but I''ve tried alot of different things, all failing, some worse than others. The end result is to throttle back 126

Hi Guys, Here is a question that is probably of concern to many of us. I am under pressure to provide some solution for ingress traffic shaping. What my customer demands is to divide the downstream (ingress) of an ADSL lines to two classes of traffic - important traffic and non important downloads. He has a very reasonable requirement: he wants a guarantee of at least 1000kbps at all times for

LS, Spent a lot of this weekend reading about shaping and traffic control. The Howto is very extensive... :-) I hope to use this list to see if what I want is possible. The situation: - A central (big) Citrix cluster located in Frankfurt (all servers in one subnet) - The office in Rotterdam connected to Franfurt with a 2Mbit line - The office in Bergen (Norway) connected to *Rotterdam* with a

hi, is there any reason why there is no such thing as ADD_DNAT_ALIASES in shorewall.conf or in rules (or am i just missed it)? i think about it like in masq file if the masquaraded outgoing interface is different from the default firewall intyerface than i can use ip:<digit> where the digit is the alias number. since dnat is in the rules it can be used from there. eg: if would like to dnat

Hello, i´ve installed a Suse 8.1 minimal System with iproute 2.4.7 and iptables, Suse default Kernel 2.4.19. When I start the Wondershaper 1.1a Script I get the following Error: CBQ: "allot" is required to set WRR parameters. /home/skripte/./wshaper: line 72: allot: command not found CBQ: "allot" is required to set WRR parameters. /home/skripte/./wshaper: line 78: allot:

here''s the output : # tc -s -d class show dev eth0 class cbq 1: root rate 10Mbit cell 8b (bounded,isolated) prio no-transmit/8 weight 10Mbit allot 1514b level 2 ewma 5 avpkt 1000b maxidle 23us Sent 294 bytes 7 pkts (dropped 0, overlimits 0) borrowed 0 overactions 0 avgidle 605 undertime 0 class cbq 1:10 parent 1:1 leaf 10: rate 100Kbit cell 8b prio 1/1 weight 100Kbit allot 1600b

Hi! I have configured traffic shaping with htb and imq but when i am downloading the latency for example on the Bnet class is very high ..... example: 65 kb/s download best latency: 56ms lateny on bnet class while downloading: 400 350 250 350 400 100 300 200 80 200 300 250 ..... To get informations about latency i am marking ping packets with iptables. I want to play during other users

Hello, Has anyone had any luck compiling Alexander''s QOS script on a vanilla FC3 or FC2 box? I just cant seem to get the darn thing to port right. Regards, Bryan _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

To stress the urgency and importance of my questions, I am willing to pay $100 to the first person that can provide me with the scripts/ rules that will work in my SnapGear firewalls that will solve the problems I am having. Please see the following post: Linux QOS and prioritization of real-time data (RTP/VoIP) Thank you!