thr3ads.net - Xen users - Is Xen VGA Passthrough to CentOS 6.3 x86-64 HVM domU successful? [Oct 2012]

If this information is useful, please help other people find it:
Share via:

Teo En Ming (Zhang Enming)

2012-Oct-27 14:59 UTC

Is Xen VGA Passthrough to CentOS 6.3 x86-64 HVM domU successful?

Hi,

I have just passed through my NVIDIA Geforce GTX 560 to CentOS 6.3 
x86-64 HVM domU. I am wondering whether the Xen VGA Passthrough is 
successful.

The following information is obtained from inside CentOS 6.3 x86-64 HVM 
domU:

00:05.0 VGA compatible controller: NVIDIA Corporation GF114 [GeForce GTX 
560] (rev a1) (prog-if 00 [VGA controller])
     Subsystem: Giga-byte Technology Device 3527
     Physical Slot: 5
     Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
     Latency: 64
     Interrupt: pin A routed to IRQ 36
     Region 0: Memory at dc000000 (32-bit, non-prefetchable) [size=32M]
     Region 1: Memory at d0000000 (64-bit, prefetchable) [size=128M]
     Region 3: Memory at d8000000 (64-bit, prefetchable) [size=64M]
     Region 5: I/O ports at e000 [size=128]
     [virtual] Expansion ROM at f1080000 [disabled] [size=512K]
     Capabilities: [60] Power Management version 3
         Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot-,D3cold-)
         Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
     Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
         Address: 0000000000000000  Data: 0000
     Capabilities: [78] Express (v1) Endpoint, MSI 00
         DevCap:    MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, 
L1 <64us
             ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
         DevCtl:    Report errors: Correctable- Non-Fatal- Fatal- 
Unsupported-
             RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
             MaxPayload 128 bytes, MaxReadReq 512 bytes
         DevSta:    CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- 
TransPend-
         LnkCap:    Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, 
Latency L0 <256ns, L1 <4us
             ClockPM+ Surprise- LLActRep- BwNot-
         LnkCtl:    ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
             ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
         LnkSta:    Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ 
DLActive- BWMgmt- ABWMgmt-
     Capabilities: [b4] Vendor Specific Information <?>
     Kernel driver in use: nouveau
     Kernel modules: nvidia, nouveau, nvidiafb



[root@centos63 ~]# lsmod | grep nouveau
nouveau               791165  2
ttm                    82562  1 nouveau
drm_kms_helper         34122  1 nouveau
drm                   250067  4 nouveau,ttm,drm_kms_helper
i2c_core               31276  14 
tuner_simple,tda9887,tda8290,wm8775,tuner,cx25840,pvrusb2,v4l2_common,videodev,tveeprom,i2c_piix4,nouveau,drm_kms_helper,drm
mxm_wmi                 1925  1 nouveau
video                  21032  1 nouveau
wmi                     6287  2 nouveau,mxm_wmi




Notice that the nouveau VGA driver is loaded and is in use. Is Xen VGA 
Passthrough 100% successful? I have successfully installed the NVIDIA 
driver but I couldn''t get it to load, so I reverted back to the nouveau
driver.

I have such tough time getting Xen VGA Passthrough to work successfully 
on Windows HVM domU that I am giving up on Xen VGA Passthrough to 
Windows HVM domU!!! Windows 7 and Windows 8 HVM domU device manager 
always report error code 43 with a yellow triangle. Windows XP HVM domU 
device manager always report error code 10 with a yellow circle.

-- 
Yours sincerely,

Mr. Teo En Ming (Zhang Enming)
Singapore

Teo En Ming (Zhang Enming)

2012-Oct-27 14:59 UTC

head link

Is Xen VGA Passthrough to CentOS 6.3 x86-64 HVM domU successful?

Hi,

I have just passed through my NVIDIA Geforce GTX 560 to CentOS 6.3 
x86-64 HVM domU. I am wondering whether the Xen VGA Passthrough is 
successful.

The following information is obtained from inside CentOS 6.3 x86-64 HVM 
domU:

00:05.0 VGA compatible controller: NVIDIA Corporation GF114 [GeForce GTX 
560] (rev a1) (prog-if 00 [VGA controller])
     Subsystem: Giga-byte Technology Device 3527
     Physical Slot: 5
     Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
     Latency: 64
     Interrupt: pin A routed to IRQ 36
     Region 0: Memory at dc000000 (32-bit, non-prefetchable) [size=32M]
     Region 1: Memory at d0000000 (64-bit, prefetchable) [size=128M]
     Region 3: Memory at d8000000 (64-bit, prefetchable) [size=64M]
     Region 5: I/O ports at e000 [size=128]
     [virtual] Expansion ROM at f1080000 [disabled] [size=512K]
     Capabilities: [60] Power Management version 3
         Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot-,D3cold-)
         Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
     Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
         Address: 0000000000000000  Data: 0000
     Capabilities: [78] Express (v1) Endpoint, MSI 00
         DevCap:    MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, 
L1 <64us
             ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
         DevCtl:    Report errors: Correctable- Non-Fatal- Fatal- 
Unsupported-
             RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
             MaxPayload 128 bytes, MaxReadReq 512 bytes
         DevSta:    CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- 
TransPend-
         LnkCap:    Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, 
Latency L0 <256ns, L1 <4us
             ClockPM+ Surprise- LLActRep- BwNot-
         LnkCtl:    ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
             ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
         LnkSta:    Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ 
DLActive- BWMgmt- ABWMgmt-
     Capabilities: [b4] Vendor Specific Information <?>
     Kernel driver in use: nouveau
     Kernel modules: nvidia, nouveau, nvidiafb



[root@centos63 ~]# lsmod | grep nouveau
nouveau               791165  2
ttm                    82562  1 nouveau
drm_kms_helper         34122  1 nouveau
drm                   250067  4 nouveau,ttm,drm_kms_helper
i2c_core               31276  14 
tuner_simple,tda9887,tda8290,wm8775,tuner,cx25840,pvrusb2,v4l2_common,videodev,tveeprom,i2c_piix4,nouveau,drm_kms_helper,drm
mxm_wmi                 1925  1 nouveau
video                  21032  1 nouveau
wmi                     6287  2 nouveau,mxm_wmi




Notice that the nouveau VGA driver is loaded and is in use. Is Xen VGA 
Passthrough 100% successful? I have successfully installed the NVIDIA 
driver but I couldn''t get it to load, so I reverted back to the nouveau
driver.

I have such tough time getting Xen VGA Passthrough to work successfully 
on Windows HVM domU that I am giving up on Xen VGA Passthrough to 
Windows HVM domU!!! Windows 7 and Windows 8 HVM domU device manager 
always report error code 43 with a yellow triangle. Windows XP HVM domU 
device manager always report error code 10 with a yellow circle.

-- 
Yours sincerely,

Mr. Teo En Ming (Zhang Enming)
Singapore

Teo En Ming (Zhang Enming)

2012-Oct-27 15:03 UTC

head link

Is Xen VGA Passthrough to CentOS 6.3 x86-64 HVM domU successful?

Hi,

I have just passed through my NVIDIA Geforce GTX 560 to CentOS 6.3 
x86-64 HVM domU. I am wondering whether the Xen VGA Passthrough is 
successful.

The following information is obtained from inside CentOS 6.3 x86-64 HVM 
domU:

00:05.0 VGA compatible controller: NVIDIA Corporation GF114 [GeForce GTX 
560] (rev a1) (prog-if 00 [VGA controller])
     Subsystem: Giga-byte Technology Device 3527
     Physical Slot: 5
     Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
     Latency: 64
     Interrupt: pin A routed to IRQ 36
     Region 0: Memory at dc000000 (32-bit, non-prefetchable) [size=32M]
     Region 1: Memory at d0000000 (64-bit, prefetchable) [size=128M]
     Region 3: Memory at d8000000 (64-bit, prefetchable) [size=64M]
     Region 5: I/O ports at e000 [size=128]
     [virtual] Expansion ROM at f1080000 [disabled] [size=512K]
     Capabilities: [60] Power Management version 3
         Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot-,D3cold-)
         Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
     Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
         Address: 0000000000000000  Data: 0000
     Capabilities: [78] Express (v1) Endpoint, MSI 00
         DevCap:    MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, 
L1 <64us
             ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
         DevCtl:    Report errors: Correctable- Non-Fatal- Fatal- 
Unsupported-
             RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
             MaxPayload 128 bytes, MaxReadReq 512 bytes
         DevSta:    CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- 
TransPend-
         LnkCap:    Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, 
Latency L0 <256ns, L1 <4us
             ClockPM+ Surprise- LLActRep- BwNot-
         LnkCtl:    ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
             ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
         LnkSta:    Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ 
DLActive- BWMgmt- ABWMgmt-
     Capabilities: [b4] Vendor Specific Information <?>
     Kernel driver in use: nouveau
     Kernel modules: nvidia, nouveau, nvidiafb



[root@centos63 ~]# lsmod | grep nouveau
nouveau               791165  2
ttm                    82562  1 nouveau
drm_kms_helper         34122  1 nouveau
drm                   250067  4 nouveau,ttm,drm_kms_helper
i2c_core               31276  14 
tuner_simple,tda9887,tda8290,wm8775,tuner,cx25840,pvrusb2,v4l2_common,videodev,tveeprom,i2c_piix4,nouveau,drm_kms_helper,drm
mxm_wmi                 1925  1 nouveau
video                  21032  1 nouveau
wmi                     6287  2 nouveau,mxm_wmi




Notice that the nouveau VGA driver is loaded and is in use. Is Xen VGA 
Passthrough 100% successful? I have successfully installed the NVIDIA 
driver but I couldn''t get it to load, so I reverted back to the nouveau
driver.

I have such tough time getting Xen VGA Passthrough to work successfully 
on Windows HVM domU that I am giving up on Xen VGA Passthrough to 
Windows HVM domU!!! Windows 7 and Windows 8 HVM domU device manager 
always report error code 43 with a yellow triangle. Windows XP HVM domU 
device manager always report error code 10 with a yellow circle.

-- 
Yours sincerely,

Mr. Teo En Ming (Zhang Enming)
Singapore

Teo En Ming (Zhang Enming)

2012-Oct-27 15:35 UTC

head link

Re: Is Xen VGA Passthrough to CentOS 6.3 x86-64 HVM domU successful?

My CentOS 6.3 x86-64 HVM domU configuration:

# This configuration file will only work with Xen 4.1.3-rc1-pre and NOT
# Xen 4.2-unstable due to the disk parameter.
#
# XL domain configuration file for Ubuntu 12.04 Precise Pangolin Beta 1 
amd64 HVM domU
# Please refer to "man xl.cfg" for further explanations.
# See also docs/misc/xl-network-configuration.markdown and
# docs/misc/xl-disk-configuration.txt
# Written by Teo En Ming (Zhang Enming)
# Email #1: teo.en.ming@gmail.com
# Email #2: teo-en-ming@teo-en-ming.com
# Mobile Phone: +65-8369-2618
# Country: Singapore
# Date: 20 Mar 2012 Tue
name="CentOS"
builder="hvm"
vcpus=2
memory=1024
on_poweroff="destroy"
on_reboot="restart"
on_crash="destroy"
# Format compatible with Xen 4.2-unstable changeset 25070 only.
disk=[ ''format=raw, vdev=hda, access=rw, 
target=/etc/xen/images/centos63.img'', ''format=raw, vdev=hdc,
access=ro,
devtype=cdrom, target=/home/teo-en-ming/CentOS-6.3-x86_64-bin-DVD1.iso''
]
# Format compatible with Xen 4.1.3-rc1-pre only.
#disk=[ 
''file:/var/lib/libvirt/images/Ubuntu-12.04-beta1-amd64.img,hda,w'',
''file:/home/teo-en-ming/Downloads/ubuntu-12.04-beta1-dvd-amd64.iso,hdc:cdrom,r''
]
vif=[ ''bridge=eth0,type=ioemu,model=e1000'' ]
#boot=[c|d|n]
#Selects the emulated virtual device to boot from. Options are hard disk 
(c), cd-rom (d) or network/PXE (n).
#Multiple options can be given and will be attempted in the order they 
are given. e.g. to boot from cd-rom
#but fallback to the hard disk you can give dc. The default is cd.
#boot="dc"
boot="c"
acpi=1
#xen_platform_pci=1
#viridian=1
stdvga=0
vnc=1
vnclisten="localhost"
vncdisplay=0
vncunused=1
vncpasswd=""
sdl=0
usb=1
usbdevice="tablet"
gfx_passthru=1
# VGA Passthrough Gigabyte Geforce GTX 560 1 GB GDDR5 PCI Express x16 
VGA card.
pci = [ 
''01:00.0'',''01:00.1'',''00:1b.0'',''00:1a.0'',''00:1a.1'',''00:1a.2'',''00:1a.7'',''00:1d.0'',''00:1d.1'',''00:1d.2'',''00:1d.7''
]

-- 
Yours sincerely,

Mr. Teo En Ming (Zhang Enming)
Singapore

On 10/27/2012 10:59 PM, Teo En Ming (Zhang Enming)
wrote:> Hi,
>
> I have just passed through my NVIDIA Geforce GTX 560 to CentOS 6.3 
> x86-64 HVM domU. I am wondering whether the Xen VGA Passthrough is 
> successful.
>
> The following information is obtained from inside CentOS 6.3 x86-64 
> HVM domU:
>
> 00:05.0 VGA compatible controller: NVIDIA Corporation GF114 [GeForce 
> GTX 560] (rev a1) (prog-if 00 [VGA controller])
>     Subsystem: Giga-byte Technology Device 3527
>     Physical Slot: 5
>     Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
> ParErr- Stepping- SERR- FastB2B- DisINTx-
>     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>     Latency: 64
>     Interrupt: pin A routed to IRQ 36
>     Region 0: Memory at dc000000 (32-bit, non-prefetchable) [size=32M]
>     Region 1: Memory at d0000000 (64-bit, prefetchable) [size=128M]
>     Region 3: Memory at d8000000 (64-bit, prefetchable) [size=64M]
>     Region 5: I/O ports at e000 [size=128]
>     [virtual] Expansion ROM at f1080000 [disabled] [size=512K]
>     Capabilities: [60] Power Management version 3
>         Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
>         Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
>     Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
>         Address: 0000000000000000  Data: 0000
>     Capabilities: [78] Express (v1) Endpoint, MSI 00
>         DevCap:    MaxPayload 128 bytes, PhantFunc 0, Latency L0s 
> <4us, L1 <64us
>             ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
>         DevCtl:    Report errors: Correctable- Non-Fatal- Fatal- 
> Unsupported-
>             RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
>             MaxPayload 128 bytes, MaxReadReq 512 bytes
>         DevSta:    CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- 
> TransPend-
>         LnkCap:    Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, 
> Latency L0 <256ns, L1 <4us
>             ClockPM+ Surprise- LLActRep- BwNot-
>         LnkCtl:    ASPM Disabled; RCB 64 bytes Disabled- Retrain- 
> CommClk-
>             ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>         LnkSta:    Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ 
> DLActive- BWMgmt- ABWMgmt-
>     Capabilities: [b4] Vendor Specific Information <?>
>     Kernel driver in use: nouveau
>     Kernel modules: nvidia, nouveau, nvidiafb
>
>
>
> [root@centos63 ~]# lsmod | grep nouveau
> nouveau               791165  2
> ttm                    82562  1 nouveau
> drm_kms_helper         34122  1 nouveau
> drm                   250067  4 nouveau,ttm,drm_kms_helper
> i2c_core               31276  14 
>
tuner_simple,tda9887,tda8290,wm8775,tuner,cx25840,pvrusb2,v4l2_common,videodev,tveeprom,i2c_piix4,nouveau,drm_kms_helper,drm
> mxm_wmi                 1925  1 nouveau
> video                  21032  1 nouveau
> wmi                     6287  2 nouveau,mxm_wmi
>
>
>
>
> Notice that the nouveau VGA driver is loaded and is in use. Is Xen VGA 
> Passthrough 100% successful? I have successfully installed the NVIDIA 
> driver but I couldn''t get it to load, so I reverted back to the 
> nouveau driver.
>
> I have such tough time getting Xen VGA Passthrough to work 
> successfully on Windows HVM domU that I am giving up on Xen VGA 
> Passthrough to Windows HVM domU!!! Windows 7 and Windows 8 HVM domU 
> device manager always report error code 43 with a yellow triangle. 
> Windows XP HVM domU device manager always report error code 10 with a 
> yellow circle.
>

Teo En Ming (Zhang Enming)

2012-Oct-27 15:35 UTC

head link

Re: Is Xen VGA Passthrough to CentOS 6.3 x86-64 HVM domU successful?

My CentOS 6.3 x86-64 HVM domU configuration:

# This configuration file will only work with Xen 4.1.3-rc1-pre and NOT
# Xen 4.2-unstable due to the disk parameter.
#
# XL domain configuration file for Ubuntu 12.04 Precise Pangolin Beta 1 
amd64 HVM domU
# Please refer to "man xl.cfg" for further explanations.
# See also docs/misc/xl-network-configuration.markdown and
# docs/misc/xl-disk-configuration.txt
# Written by Teo En Ming (Zhang Enming)
# Email #1: teo.en.ming@gmail.com
# Email #2: teo-en-ming@teo-en-ming.com
# Mobile Phone: +65-8369-2618
# Country: Singapore
# Date: 20 Mar 2012 Tue
name="CentOS"
builder="hvm"
vcpus=2
memory=1024
on_poweroff="destroy"
on_reboot="restart"
on_crash="destroy"
# Format compatible with Xen 4.2-unstable changeset 25070 only.
disk=[ ''format=raw, vdev=hda, access=rw, 
target=/etc/xen/images/centos63.img'', ''format=raw, vdev=hdc,
access=ro,
devtype=cdrom, target=/home/teo-en-ming/CentOS-6.3-x86_64-bin-DVD1.iso''
]
# Format compatible with Xen 4.1.3-rc1-pre only.
#disk=[ 
''file:/var/lib/libvirt/images/Ubuntu-12.04-beta1-amd64.img,hda,w'',
''file:/home/teo-en-ming/Downloads/ubuntu-12.04-beta1-dvd-amd64.iso,hdc:cdrom,r''
]
vif=[ ''bridge=eth0,type=ioemu,model=e1000'' ]
#boot=[c|d|n]
#Selects the emulated virtual device to boot from. Options are hard disk 
(c), cd-rom (d) or network/PXE (n).
#Multiple options can be given and will be attempted in the order they 
are given. e.g. to boot from cd-rom
#but fallback to the hard disk you can give dc. The default is cd.
#boot="dc"
boot="c"
acpi=1
#xen_platform_pci=1
#viridian=1
stdvga=0
vnc=1
vnclisten="localhost"
vncdisplay=0
vncunused=1
vncpasswd=""
sdl=0
usb=1
usbdevice="tablet"
gfx_passthru=1
# VGA Passthrough Gigabyte Geforce GTX 560 1 GB GDDR5 PCI Express x16 
VGA card.
pci = [ 
''01:00.0'',''01:00.1'',''00:1b.0'',''00:1a.0'',''00:1a.1'',''00:1a.2'',''00:1a.7'',''00:1d.0'',''00:1d.1'',''00:1d.2'',''00:1d.7''
]

-- 
Yours sincerely,

Mr. Teo En Ming (Zhang Enming)
Singapore

On 10/27/2012 10:59 PM, Teo En Ming (Zhang Enming)
wrote:> Hi,
>
> I have just passed through my NVIDIA Geforce GTX 560 to CentOS 6.3 
> x86-64 HVM domU. I am wondering whether the Xen VGA Passthrough is 
> successful.
>
> The following information is obtained from inside CentOS 6.3 x86-64 
> HVM domU:
>
> 00:05.0 VGA compatible controller: NVIDIA Corporation GF114 [GeForce 
> GTX 560] (rev a1) (prog-if 00 [VGA controller])
>     Subsystem: Giga-byte Technology Device 3527
>     Physical Slot: 5
>     Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
> ParErr- Stepping- SERR- FastB2B- DisINTx-
>     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>     Latency: 64
>     Interrupt: pin A routed to IRQ 36
>     Region 0: Memory at dc000000 (32-bit, non-prefetchable) [size=32M]
>     Region 1: Memory at d0000000 (64-bit, prefetchable) [size=128M]
>     Region 3: Memory at d8000000 (64-bit, prefetchable) [size=64M]
>     Region 5: I/O ports at e000 [size=128]
>     [virtual] Expansion ROM at f1080000 [disabled] [size=512K]
>     Capabilities: [60] Power Management version 3
>         Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
>         Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
>     Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
>         Address: 0000000000000000  Data: 0000
>     Capabilities: [78] Express (v1) Endpoint, MSI 00
>         DevCap:    MaxPayload 128 bytes, PhantFunc 0, Latency L0s 
> <4us, L1 <64us
>             ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
>         DevCtl:    Report errors: Correctable- Non-Fatal- Fatal- 
> Unsupported-
>             RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
>             MaxPayload 128 bytes, MaxReadReq 512 bytes
>         DevSta:    CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- 
> TransPend-
>         LnkCap:    Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, 
> Latency L0 <256ns, L1 <4us
>             ClockPM+ Surprise- LLActRep- BwNot-
>         LnkCtl:    ASPM Disabled; RCB 64 bytes Disabled- Retrain- 
> CommClk-
>             ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>         LnkSta:    Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ 
> DLActive- BWMgmt- ABWMgmt-
>     Capabilities: [b4] Vendor Specific Information <?>
>     Kernel driver in use: nouveau
>     Kernel modules: nvidia, nouveau, nvidiafb
>
>
>
> [root@centos63 ~]# lsmod | grep nouveau
> nouveau               791165  2
> ttm                    82562  1 nouveau
> drm_kms_helper         34122  1 nouveau
> drm                   250067  4 nouveau,ttm,drm_kms_helper
> i2c_core               31276  14 
>
tuner_simple,tda9887,tda8290,wm8775,tuner,cx25840,pvrusb2,v4l2_common,videodev,tveeprom,i2c_piix4,nouveau,drm_kms_helper,drm
> mxm_wmi                 1925  1 nouveau
> video                  21032  1 nouveau
> wmi                     6287  2 nouveau,mxm_wmi
>
>
>
>
> Notice that the nouveau VGA driver is loaded and is in use. Is Xen VGA 
> Passthrough 100% successful? I have successfully installed the NVIDIA 
> driver but I couldn''t get it to load, so I reverted back to the 
> nouveau driver.
>
> I have such tough time getting Xen VGA Passthrough to work 
> successfully on Windows HVM domU that I am giving up on Xen VGA 
> Passthrough to Windows HVM domU!!! Windows 7 and Windows 8 HVM domU 
> device manager always report error code 43 with a yellow triangle. 
> Windows XP HVM domU device manager always report error code 10 with a 
> yellow circle.
>

Teo En Ming (Zhang Enming)

2012-Oct-27 15:40 UTC

head link

Re: Is Xen VGA Passthrough to CentOS 6.3 x86-64 HVM domU successful?

Attached CentOS 6.3 x86-64 HVM domU configuration file.

-- 
Yours sincerely,

Mr. Teo En Ming (Zhang Enming)
Singapore



On 10/27/2012 11:35 PM, Teo En Ming (Zhang Enming)
wrote:> My CentOS 6.3 x86-64 HVM domU configuration:
>
> # This configuration file will only work with Xen 4.1.3-rc1-pre and NOT
> # Xen 4.2-unstable due to the disk parameter.
> #
> # XL domain configuration file for Ubuntu 12.04 Precise Pangolin Beta 
> 1 amd64 HVM domU
> # Please refer to "man xl.cfg" for further explanations.
> # See also docs/misc/xl-network-configuration.markdown and
> # docs/misc/xl-disk-configuration.txt
> # Written by Teo En Ming (Zhang Enming)
> # Email #1: teo.en.ming@gmail.com
> # Email #2: teo-en-ming@teo-en-ming.com
> # Mobile Phone: +65-8369-2618
> # Country: Singapore
> # Date: 20 Mar 2012 Tue
> name="CentOS"
> builder="hvm"
> vcpus=2
> memory=1024
> on_poweroff="destroy"
> on_reboot="restart"
> on_crash="destroy"
> # Format compatible with Xen 4.2-unstable changeset 25070 only.
> disk=[ ''format=raw, vdev=hda, access=rw, 
> target=/etc/xen/images/centos63.img'', ''format=raw,
vdev=hdc,
> access=ro, devtype=cdrom, 
> target=/home/teo-en-ming/CentOS-6.3-x86_64-bin-DVD1.iso'' ]
> # Format compatible with Xen 4.1.3-rc1-pre only.
> #disk=[ 
>
''file:/var/lib/libvirt/images/Ubuntu-12.04-beta1-amd64.img,hda,w'',
>
''file:/home/teo-en-ming/Downloads/ubuntu-12.04-beta1-dvd-amd64.iso,hdc:cdrom,r''
> ]
> vif=[ ''bridge=eth0,type=ioemu,model=e1000'' ]
> #boot=[c|d|n]
> #Selects the emulated virtual device to boot from. Options are hard 
> disk (c), cd-rom (d) or network/PXE (n).
> #Multiple options can be given and will be attempted in the order they 
> are given. e.g. to boot from cd-rom
> #but fallback to the hard disk you can give dc. The default is cd.
> #boot="dc"
> boot="c"
> acpi=1
> #xen_platform_pci=1
> #viridian=1
> stdvga=0
> vnc=1
> vnclisten="localhost"
> vncdisplay=0
> vncunused=1
> vncpasswd=""
> sdl=0
> usb=1
> usbdevice="tablet"
> gfx_passthru=1
> # VGA Passthrough Gigabyte Geforce GTX 560 1 GB GDDR5 PCI Express x16 
> VGA card.
> pci = [ 
>
''01:00.0'',''01:00.1'',''00:1b.0'',''00:1a.0'',''00:1a.1'',''00:1a.2'',''00:1a.7'',''00:1d.0'',''00:1d.1'',''00:1d.2'',''00:1d.7''
> ]
>



_______________________________________________
Xen-users mailing list
Xen-users@lists.xen.org
http://lists.xen.org/xen-users

Teo En Ming (Zhang Enming)

2012-Oct-27 15:40 UTC

head link

Re: Is Xen VGA Passthrough to CentOS 6.3 x86-64 HVM domU successful?

Attached CentOS 6.3 x86-64 HVM domU configuration file.

-- 
Yours sincerely,

Mr. Teo En Ming (Zhang Enming)
Singapore



On 10/27/2012 11:35 PM, Teo En Ming (Zhang Enming)
wrote:> My CentOS 6.3 x86-64 HVM domU configuration:
>
> # This configuration file will only work with Xen 4.1.3-rc1-pre and NOT
> # Xen 4.2-unstable due to the disk parameter.
> #
> # XL domain configuration file for Ubuntu 12.04 Precise Pangolin Beta 
> 1 amd64 HVM domU
> # Please refer to "man xl.cfg" for further explanations.
> # See also docs/misc/xl-network-configuration.markdown and
> # docs/misc/xl-disk-configuration.txt
> # Written by Teo En Ming (Zhang Enming)
> # Email #1: teo.en.ming@gmail.com
> # Email #2: teo-en-ming@teo-en-ming.com
> # Mobile Phone: +65-8369-2618
> # Country: Singapore
> # Date: 20 Mar 2012 Tue
> name="CentOS"
> builder="hvm"
> vcpus=2
> memory=1024
> on_poweroff="destroy"
> on_reboot="restart"
> on_crash="destroy"
> # Format compatible with Xen 4.2-unstable changeset 25070 only.
> disk=[ ''format=raw, vdev=hda, access=rw, 
> target=/etc/xen/images/centos63.img'', ''format=raw,
vdev=hdc,
> access=ro, devtype=cdrom, 
> target=/home/teo-en-ming/CentOS-6.3-x86_64-bin-DVD1.iso'' ]
> # Format compatible with Xen 4.1.3-rc1-pre only.
> #disk=[ 
>
''file:/var/lib/libvirt/images/Ubuntu-12.04-beta1-amd64.img,hda,w'',
>
''file:/home/teo-en-ming/Downloads/ubuntu-12.04-beta1-dvd-amd64.iso,hdc:cdrom,r''
> ]
> vif=[ ''bridge=eth0,type=ioemu,model=e1000'' ]
> #boot=[c|d|n]
> #Selects the emulated virtual device to boot from. Options are hard 
> disk (c), cd-rom (d) or network/PXE (n).
> #Multiple options can be given and will be attempted in the order they 
> are given. e.g. to boot from cd-rom
> #but fallback to the hard disk you can give dc. The default is cd.
> #boot="dc"
> boot="c"
> acpi=1
> #xen_platform_pci=1
> #viridian=1
> stdvga=0
> vnc=1
> vnclisten="localhost"
> vncdisplay=0
> vncunused=1
> vncpasswd=""
> sdl=0
> usb=1
> usbdevice="tablet"
> gfx_passthru=1
> # VGA Passthrough Gigabyte Geforce GTX 560 1 GB GDDR5 PCI Express x16 
> VGA card.
> pci = [ 
>
''01:00.0'',''01:00.1'',''00:1b.0'',''00:1a.0'',''00:1a.1'',''00:1a.2'',''00:1a.7'',''00:1d.0'',''00:1d.1'',''00:1d.2'',''00:1d.7''
> ]
>



_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
http://lists.xen.org/xen-devel

Possibly Parallel Threads

Search for more possibly parallel threads

Xen users - Oct 2012 - Is Xen VGA Passthrough to CentOS 6.3 x86-64 HVM domU successful?

Is Xen VGA Passthrough to CentOS 6.3 x86-64 HVM domU successful?

Is Xen VGA Passthrough to CentOS 6.3 x86-64 HVM domU successful?

Is Xen VGA Passthrough to CentOS 6.3 x86-64 HVM domU successful?

Re: Is Xen VGA Passthrough to CentOS 6.3 x86-64 HVM domU successful?

Re: Is Xen VGA Passthrough to CentOS 6.3 x86-64 HVM domU successful?

Re: Is Xen VGA Passthrough to CentOS 6.3 x86-64 HVM domU successful?

Re: Is Xen VGA Passthrough to CentOS 6.3 x86-64 HVM domU successful?

Possibly Parallel Threads