I'd appreciate it if someone was able to assist.
Running the command:
dahdi_hardware:
pci:0000:08:08.0 wcte12xp+ d161:8000 Wildcard TE121
dahdi_scan:
[1]
active=yes
alarms=REC
description=Wildcard TE121 Card 0
name=WCT1/0
manufacturer=Digium
devicetype=Wildcard TE121 with VPMADT032
location=PCI Bus 08 Slot 09
basechan=1
totchans=31
irq=169
type=digital-E1
syncsrc=1
lbo=0 db (CSU)/0-133 feet (DSX-1)
coding_opts=HDB3
framing_opts=CCS,CRC4
coding=HDB3
framing=CCS
cat /etc/dahdi/system.conf:
bchan=1-15,17-31
dchan=16
echocanceller=mg2,1-15,17-31
loadzone = cn
defaultzone = cn
From: Klaverstyn, David C
Sent: Monday, 28 September 2009 5:05 PM
To: 'asterisk-users at lists.digium.com'
Subject: TE121P Blue Alarm/Recovering
Hi All,
I have a TE121P card installed and since connected it to the PRI I keep
getting the Current Alarm as continually changing from Blue
Alarm/Recovering and Recovering.
The config I have is:
/etc/dahdi/system.conf
bchan=1-15,17-31
dchan=16
echocanceller=mg2,1-15,17-31
loadzone = cn
defaultzone = cn
/etc/asterisk/chan_dahdi.cfg
[channels]
Context=telco
language=cn
switchtype=euroisdn
signalling=pri_cpe
rxwink=300
usecallerid=yes
.
.
echocancel=yes
group=1
channel=>1-15,17-31
I installed the following components
Asterisk 1.4.26.2
DAHDI Linux 2.2.0.2
DAHDI Tools 2.2.0
Libpri 1.4.10.1
Addons 1.4.9
Any help would be greatly appreciated.
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20090929/9b02abcb/attachment.htm