asterisk users - Oct 2007 - Can't get sangoma A102D setup on asterisk

I have a new Sangoma A102 and I'm trying to get it running in asterisk.  A
look through the dmesg log shows the card is detected and the various
channels created.  However, when I start asterisk I get the error below.
Any ideas?
 
My zapata.conf is below.
Thanks,
MD
 
  == Registered custom function SIPCHANINFO
  == Registered custom function CHECKSIPDOMAIN
  == Manager registered action SIPpeers
  == Manager registered action SIPshowpeer
 [chan_zap.so] => (Zapata Telephony w/PRI)
  == Parsing '/etc/asterisk/zapata.conf': Found
Oct 26 15:59:47 WARNING[14883]: chan_zap.c:1072 zt_open: Unable to specify
channel 1: No such device or address
Oct 26 15:59:47 ERROR[14883]: chan_zap.c:7038 mkintf: Unable to open channel
1: No such device or address
here = 0, tmp->channel = 1, channel = 1
Oct 26 15:59:47 ERROR[14883]: chan_zap.c:10472 setup_zap: Unable to register
channel '1-23'
Oct 26 15:59:47 WARNING[14883]: loader.c:415 __load_resource: chan_zap.so:
load_module failed, returning -1
Oct 26 15:59:47 WARNING[14883]: loader.c:500 load_modules: Loading module
chan_zap.so failed!
 
 
 
MY ZAPATA.CONF:
 
;Zaptel Channels Configurations (zapata.conf)
;
;For detailed zapata options, view /etc/asterisk/zapata.conf.orig
 
[trunkgroups]
 
[channels]
context=default
usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
canpark=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=yes
relaxdtmf=yes
rxgain=0.0
txgain=0.0
group=1     
callgroup=1     
pickupgroup=1     
 
immediate=no
 
;Sangoma A102 port 1 [slot:12 bus:2 span: 1]
switchtype=dms100
context=from-nortel
group=1     
signalling=pri_cpe
channel => 1-23
 
;Sangoma A102 port 2 [slot:12 bus:2 span: 2]
switchtype=dms100
context=from-nortel
group=1     
signalling=pri_cpe
channel => 25-47
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20071026/ada9920d/attachment.htm

On Fri, Oct 26, 2007 at 04:00:30PM -0400, Michelle Dupuis
wrote:
> I have a new Sangoma A102 and I'm trying to get it running in asterisk.
A
> look through the dmesg log shows the card is detected and the various
> channels created.  However, when I start asterisk I get the error below.
> Any ideas?
>  
> My zapata.conf is below.
> Thanks,
> MD
>  
>   == Registered custom function SIPCHANINFO
>   == Registered custom function CHECKSIPDOMAIN
>   == Manager registered action SIPpeers
>   == Manager registered action SIPshowpeer
>  [chan_zap.so] => (Zapata Telephony w/PRI)
>   == Parsing '/etc/asterisk/zapata.conf': Found
> Oct 26 15:59:47 WARNING[14883]: chan_zap.c:1072 zt_open: Unable to specify
> channel 1: No such device or address
> Oct 26 15:59:47 ERROR[14883]: chan_zap.c:7038 mkintf: Unable to open
channel
> 1: No such device or address
> here = 0, tmp->channel = 1, channel = 1
No Zaptel driver has registered Zaptel channel 1.

What is the output of:

  cat /proc/zaptel/*

-- 
               Tzafrir Cohen       
icq#16849755              jabber:tzafrir.cohen at xorcom.com
+972-50-7952406           mailto:tzafrir.cohen at xorcom.com       
http://www.xorcom.com  iax:guest at local.xorcom.com/tzafrir