Juliano Fernandes Schroeder
2007-May-11 07:04 UTC
[asterisk-users] Module wctdm24xxp not found - TDM808P on debian
I'm trying to configure a TDM808P card on debian. When I modprobe wctdm24xxp i get this error FATAL: Module wctdm24xxp not found. FATAL: Error running install command for wctdm24xxp I think i have successfully compiled the zaptel drivers, and the card appears when i do a lspci 02:06.0 Ethernet controller: Digium, Inc. Unknown device 0800 (rev 11) Subsystem: Digium, Inc. Unknown device 0800 Flags: bus master, medium devsel, latency 64, IRQ 3 I/O ports at e800 [size=256] Memory at fe200000 (32-bit, non-prefetchable) [size=1K] Expansion ROM at 20000000 [disabled] [size=128K] Capabilities: [c0] Power Management version 2 I've searched for a solution with no success. Another problem is that when i do a ztcfg -vv i get Notice: Configuration file is /etc/zaptel.conf line 0: Unable to open master device '/dev/zap/ctl' 1 error(s) detected I don't know if the errors are connected and would appreciate some help. Thanks in advance -- Juliano F. Schroeder -------------------------------------------------- Solucionathica http://www.solucionathica.com -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20070511/8f1b4d9c/attachment.htm
William Moore
2007-May-11 07:24 UTC
[asterisk-users] Module wctdm24xxp not found - TDM808P on debian
On 5/11/07, Juliano Fernandes Schroeder <juliano7s@gmail.com> wrote:> I'm trying to configure a TDM808P card on debian. When I modprobe wctdm24xxp > i get this error > FATAL: Module wctdm24xxp not found. > FATAL: Error running install command for wctdm24xxp > > I think i have successfully compiled the zaptel drivers, and the card > appears when i do a lspci > > 02:06.0 Ethernet controller: Digium, Inc. Unknown device 0800 (rev 11) > Subsystem: Digium, Inc. Unknown device 0800 > Flags: bus master, medium devsel, latency 64, IRQ 3 > I/O ports at e800 [size=256] > Memory at fe200000 (32-bit, non-prefetchable) [size=1K] > Expansion ROM at 20000000 [disabled] [size=128K] > Capabilities: [c0] Power Management version 2 > > I've searched for a solution with no success. Another problem is that when i > do a ztcfg -vv i get > > Notice: Configuration file is /etc/zaptel.conf > line 0: Unable to open master device '/dev/zap/ctl' > > 1 error(s) detected > > I don't know if the errors are connected and would appreciate some help.Did you "make install" in the zaptel source directory? If you didn't, it didn't put the kernel modules in your kernel's module directory and run depmod, so your system doesn't know about the modules.
Tzafrir Cohen
2007-May-12 16:54 UTC
[asterisk-users] Module wctdm24xxp not found - TDM808P on debian
On Fri, May 11, 2007 at 11:04:12AM -0300, Juliano Fernandes Schroeder wrote:> I'm trying to configure a TDM808P card on debian. When I modprobe wctdm24xxp > i get this error > FATAL: Module wctdm24xxp not found. > FATAL: Error running install command for wctdm24xxp > > I think i have successfully compiled the zaptel drivers,Easy to test: run the following in the zaptel source directory: ls *.ko> and the card > appears when i do a lspciThe output of lspci tells you that you have a card, but is unrelated to the drivers you may or may not have.> I've searched for a solution with no success. Another problem is that when i > do a ztcfg -vv i get > > Notice: Configuration file is /etc/zaptel.conf > line 0: Unable to open master device '/dev/zap/ctl'I suspect that you didn't even get zaptel built. modinfo zaptel Which Debian is it? Which kernel version do you use? uname -r -- Tzafrir Cohen icq#16849755 jabber:tzafrir@jabber.org +972-50-7952406 mailto:tzafrir.cohen@xorcom.com http://www.xorcom.com iax:guest@local.xorcom.com/tzafrir