Michael C. Cambria
2007-Jan-27 13:31 UTC
[asterisk-users] FXS - Init Indirect Registers UNSUCCESSFULLY.
I'm having problems with a TDM22B. The FXO modules work fine. Both FXS modules fail to initialized. The error messages I see when the module loads: Init Indirect Registers UNSUCCESSFULLY. Indirect Registers failed verification. I already RMA'ed a TDM22B because of this problem. Now that the replacement shows a similar issue, I want to see if anyone else can think of something to try; at least until Monday when I can get an RMA number for this card. If it helps, I have a TDM20B (just FXS modules) that does not see this problem when I place it in the same slot. Here is what dmesg shows for the TDM22B when the system boots, or when I issues modprobe wctdm: Freshmaker version: 73 Freshmaker passed register test !!!!!!! LOOP_CLOSE_TRES iREG 1C = 1 should be 1000 !!!!!!! RING_TRIP_TRES iREG 1D = 8000 should be 3600 !!!!!!! COMMON_MIN_TRES iREG 1E = 0 should be 1000 !!!!!!! COMMON_MAX_TRES iREG 1F = 0 should be 200 !!!!!!! PWR_ALARM_Q1Q2 iREG 20 = 1480 should be 7C0 !!!!!!! PWR_ALARM_Q3Q4 iREG 21 = 37C0 should be 2600 !!!!!!! PWR_ALARM_Q5Q6 iREG 22 = 3D70 should be 1B80 !!!!!!! LOOP_CLOSURE_FILTER iREG 23 = 3970 should be 8000 !!!!!!! RING_TRIP_FILTER iREG 24 = 78E0 should be 320 !!!!!!! TERM_LP_POLE_Q1Q2 iREG 25 = 8B60 should be 8C !!!!!!! TERM_LP_POLE_Q3Q4 iREG 26 = 6A40 should be 100 !!!!!!! TERM_LP_POLE_Q5Q6 iREG 27 = 8070 should be 10 !!!!!!! CM_BIAS_RINGING iREG 28 = FFFF should be C00 !!!!!!! DCDC_MIN_V iREG 29 = FFFF should be C00 !!!!!!! DCDC_XTRA iREG 2A = FFFF should be 1000 !!!!!!! LOOP_CLOSE_TRES_LOW iREG 2B = FFFF should be 1000 !!!!! Init Indirect Registers UNSUCCESSFULLY. Indirect Registers failed verification. !!!!!!! LOOP_CLOSE_TRES iREG 1C = 1 should be 1000 !!!!!!! RING_TRIP_TRES iREG 1D = 8000 should be 3600 !!!!!!! COMMON_MIN_TRES iREG 1E = 0 should be 1000 !!!!!!! COMMON_MAX_TRES iREG 1F = 0 should be 200 !!!!!!! PWR_ALARM_Q1Q2 iREG 20 = 1480 should be 7C0 !!!!!!! PWR_ALARM_Q3Q4 iREG 21 = 37C0 should be 2600 !!!!!!! PWR_ALARM_Q5Q6 iREG 22 = 3D70 should be 1B80 !!!!!!! LOOP_CLOSURE_FILTER iREG 23 = 3970 should be 8000 !!!!!!! RING_TRIP_FILTER iREG 24 = 78E0 should be 320 !!!!!!! TERM_LP_POLE_Q1Q2 iREG 25 = 8B60 should be 8C !!!!!!! TERM_LP_POLE_Q3Q4 iREG 26 = 6A40 should be 100 !!!!!!! TERM_LP_POLE_Q5Q6 iREG 27 = 8070 should be 10 !!!!!!! CM_BIAS_RINGING iREG 28 = FFFF should be C00 !!!!!!! DCDC_MIN_V iREG 29 = FFFF should be C00 !!!!!!! DCDC_XTRA iREG 2A = FFFF should be 1000 !!!!!!! LOOP_CLOSE_TRES_LOW iREG 2B = FFFF should be 1000 !!!!! Init Indirect Registers UNSUCCESSFULLY. Indirect Registers failed verification. Module 0: FAILED FXS (FCC) !!!!!!! LOOP_CLOSE_TRES iREG 1C = 1 should be 1000 !!!!!!! RING_TRIP_TRES iREG 1D = 8000 should be 3600 !!!!!!! COMMON_MIN_TRES iREG 1E = 0 should be 1000 !!!!!!! COMMON_MAX_TRES iREG 1F = 0 should be 200 !!!!!!! PWR_ALARM_Q1Q2 iREG 20 = 1480 should be 7C0 !!!!!!! PWR_ALARM_Q3Q4 iREG 21 = 37C0 should be 2600 !!!!!!! PWR_ALARM_Q5Q6 iREG 22 = 3D70 should be 1B80 !!!!!!! LOOP_CLOSURE_FILTER iREG 23 = 3970 should be 8000 !!!!!!! RING_TRIP_FILTER iREG 24 = 78E0 should be 320 !!!!!!! TERM_LP_POLE_Q1Q2 iREG 25 = 8B60 should be 8C !!!!!!! TERM_LP_POLE_Q3Q4 iREG 26 = 6A40 should be 100 !!!!!!! TERM_LP_POLE_Q5Q6 iREG 27 = 8070 should be 10 !!!!!!! CM_BIAS_RINGING iREG 28 = FFFF should be C00 !!!!!!! DCDC_MIN_V iREG 29 = FFFF should be C00 !!!!!!! DCDC_XTRA iREG 2A = FFFF should be 1000 !!!!!!! LOOP_CLOSE_TRES_LOW iREG 2B = FFFF should be 1000 !!!!! Init Indirect Registers UNSUCCESSFULLY. Indirect Registers failed verification. !!!!!!! LOOP_CLOSE_TRES iREG 1C = 1 should be 1000 !!!!!!! RING_TRIP_TRES iREG 1D = 8000 should be 3600 !!!!!!! COMMON_MIN_TRES iREG 1E = 0 should be 1000 !!!!!!! COMMON_MAX_TRES iREG 1F = 0 should be 200 !!!!!!! PWR_ALARM_Q1Q2 iREG 20 = 1480 should be 7C0 !!!!!!! PWR_ALARM_Q3Q4 iREG 21 = 37C0 should be 2600 !!!!!!! PWR_ALARM_Q5Q6 iREG 22 = 3D70 should be 1B80 !!!!!!! LOOP_CLOSURE_FILTER iREG 23 = 3970 should be 8000 !!!!!!! RING_TRIP_FILTER iREG 24 = 78E0 should be 320 !!!!!!! TERM_LP_POLE_Q1Q2 iREG 25 = 8B60 should be 8C !!!!!!! TERM_LP_POLE_Q3Q4 iREG 26 = 6A40 should be 100 !!!!!!! TERM_LP_POLE_Q5Q6 iREG 27 = 8070 should be 10 !!!!!!! CM_BIAS_RINGING iREG 28 = FFFF should be C00 !!!!!!! DCDC_MIN_V iREG 29 = FFFF should be C00 !!!!!!! DCDC_XTRA iREG 2A = FFFF should be 1000 !!!!!!! LOOP_CLOSE_TRES_LOW iREG 2B = FFFF should be 1000 !!!!! Init Indirect Registers UNSUCCESSFULLY. Indirect Registers failed verification. Module 1: FAILED FXS (FCC) Module 2: Installed -- AUTO FXO (FCC mode) Module 3: Installed -- AUTO FXO (FCC mode) Found a Wildcard TDM: Wildcard TDM400P REV I (2 modules) Thanks, MikeC
Chris Earle
2007-Feb-22 08:32 UTC
[asterisk-users] Re: FXS - Init Indirect Registers UNSUCCESSFULLY.
ahh! I am having this same problem all of a sudden I've installed many TDM cards before ..never had this problem what gives? Trying to load zaptel 1.0.10 ... Rev. G card ... tried uncommenting the revH fix in zconfig.h ...but no go ideas?! -- Chris "Michael C. Cambria" <mcc@fid4.com> wrote in message news:45BBB67E.1000902@fid4.com...> > I'm having problems with a TDM22B. The FXO modules work fine. Both FXS > modules fail to initialized. > > The error messages I seeR when the module loads: > > Init Indirect Registers UNSUCCESSFULLY. > Indirect Registers failed verification. > > I already RMA'ed a TDM22B because of this problem. Now that the > replacement shows a similar issue, I want to see if anyone else can > think of something to try; at least until Monday when I can get an RMA > number for this card. > > If it helps, I have a TDM20B (just FXS modules) that does not see this > problem when I place it in the same slot. > > > Here is what dmesg shows for the TDM22B when the system boots, or when I > issues modprobe wctdm: > > Freshmaker version: 73 > Freshmaker passed register test > !!!!!!! LOOP_CLOSE_TRES iREG 1C = 1 should be 1000 > !!!!!!! RING_TRIP_TRES iREG 1D = 8000 should be 3600 > !!!!!!! COMMON_MIN_TRES iREG 1E = 0 should be 1000 > !!!!!!! COMMON_MAX_TRES iREG 1F = 0 should be 200 > !!!!!!! PWR_ALARM_Q1Q2 iREG 20 = 1480 should be 7C0 > !!!!!!! PWR_ALARM_Q3Q4 iREG 21 = 37C0 should be 2600 > !!!!!!! PWR_ALARM_Q5Q6 iREG 22 = 3D70 should be 1B80 > !!!!!!! LOOP_CLOSURE_FILTER iREG 23 = 3970 should be 8000 > !!!!!!! RING_TRIP_FILTER iREG 24 = 78E0 should be 320 > !!!!!!! TERM_LP_POLE_Q1Q2 iREG 25 = 8B60 should be 8C > !!!!!!! TERM_LP_POLE_Q3Q4 iREG 26 = 6A40 should be 100 > !!!!!!! TERM_LP_POLE_Q5Q6 iREG 27 = 8070 should be 10 > !!!!!!! CM_BIAS_RINGING iREG 28 = FFFF should be C00 > !!!!!!! DCDC_MIN_V iREG 29 = FFFF should be C00 > !!!!!!! DCDC_XTRA iREG 2A = FFFF should be 1000 > !!!!!!! LOOP_CLOSE_TRES_LOW iREG 2B = FFFF should be 1000 > !!!!! Init Indirect Registers UNSUCCESSFULLY. > Indirect Registers failed verification. > !!!!!!! LOOP_CLOSE_TRES iREG 1C = 1 should be 1000 > !!!!!!! RING_TRIP_TRES iREG 1D = 8000 should be 3600 > !!!!!!! COMMON_MIN_TRES iREG 1E = 0 should be 1000 > !!!!!!! COMMON_MAX_TRES iREG 1F = 0 should be 200 > !!!!!!! PWR_ALARM_Q1Q2 iREG 20 = 1480 should be 7C0 > !!!!!!! PWR_ALARM_Q3Q4 iREG 21 = 37C0 should be 2600 > !!!!!!! PWR_ALARM_Q5Q6 iREG 22 = 3D70 should be 1B80 > !!!!!!! LOOP_CLOSURE_FILTER iREG 23 = 3970 should be 8000 > !!!!!!! RING_TRIP_FILTER iREG 24 = 78E0 should be 320 > !!!!!!! TERM_LP_POLE_Q1Q2 iREG 25 = 8B60 should be 8C > !!!!!!! TERM_LP_POLE_Q3Q4 iREG 26 = 6A40 should be 100 > !!!!!!! TERM_LP_POLE_Q5Q6 iREG 27 = 8070 should be 10 > !!!!!!! CM_BIAS_RINGING iREG 28 = FFFF should be C00 > !!!!!!! DCDC_MIN_V iREG 29 = FFFF should be C00 > !!!!!!! DCDC_XTRA iREG 2A = FFFF should be 1000 > !!!!!!! LOOP_CLOSE_TRES_LOW iREG 2B = FFFF should be 1000 > !!!!! Init Indirect Registers UNSUCCESSFULLY. > Indirect Registers failed verification. > Module 0: FAILED FXS (FCC) > !!!!!!! LOOP_CLOSE_TRES iREG 1C = 1 should be 1000 > !!!!!!! RING_TRIP_TRES iREG 1D = 8000 should be 3600 > !!!!!!! COMMON_MIN_TRES iREG 1E = 0 should be 1000 > !!!!!!! COMMON_MAX_TRES iREG 1F = 0 should be 200 > !!!!!!! PWR_ALARM_Q1Q2 iREG 20 = 1480 should be 7C0 > !!!!!!! PWR_ALARM_Q3Q4 iREG 21 = 37C0 should be 2600 > !!!!!!! PWR_ALARM_Q5Q6 iREG 22 = 3D70 should be 1B80 > !!!!!!! LOOP_CLOSURE_FILTER iREG 23 = 3970 should be 8000 > !!!!!!! RING_TRIP_FILTER iREG 24 = 78E0 should be 320 > !!!!!!! TERM_LP_POLE_Q1Q2 iREG 25 = 8B60 should be 8C > !!!!!!! TERM_LP_POLE_Q3Q4 iREG 26 = 6A40 should be 100 > !!!!!!! TERM_LP_POLE_Q5Q6 iREG 27 = 8070 should be 10 > !!!!!!! CM_BIAS_RINGING iREG 28 = FFFF should be C00 > !!!!!!! DCDC_MIN_V iREG 29 = FFFF should be C00 > !!!!!!! DCDC_XTRA iREG 2A = FFFF should be 1000 > !!!!!!! LOOP_CLOSE_TRES_LOW iREG 2B = FFFF should be 1000 > !!!!! Init Indirect Registers UNSUCCESSFULLY. > Indirect Registers failed verification. > !!!!!!! LOOP_CLOSE_TRES iREG 1C = 1 should be 1000 > !!!!!!! RING_TRIP_TRES iREG 1D = 8000 should be 3600 > !!!!!!! COMMON_MIN_TRES iREG 1E = 0 should be 1000 > !!!!!!! COMMON_MAX_TRES iREG 1F = 0 should be 200 > !!!!!!! PWR_ALARM_Q1Q2 iREG 20 = 1480 should be 7C0 > !!!!!!! PWR_ALARM_Q3Q4 iREG 21 = 37C0 should be 2600 > !!!!!!! PWR_ALARM_Q5Q6 iREG 22 = 3D70 should be 1B80 > !!!!!!! LOOP_CLOSURE_FILTER iREG 23 = 3970 should be 8000 > !!!!!!! RING_TRIP_FILTER iREG 24 = 78E0 should be 320 > !!!!!!! TERM_LP_POLE_Q1Q2 iREG 25 = 8B60 should be 8C > !!!!!!! TERM_LP_POLE_Q3Q4 iREG 26 = 6A40 should be 100 > !!!!!!! TERM_LP_POLE_Q5Q6 iREG 27 = 8070 should be 10 > !!!!!!! CM_BIAS_RINGING iREG 28 = FFFF should be C00 > !!!!!!! DCDC_MIN_V iREG 29 = FFFF should be C00 > !!!!!!! DCDC_XTRA iREG 2A = FFFF should be 1000 > !!!!!!! LOOP_CLOSE_TRES_LOW iREG 2B = FFFF should be 1000 > !!!!! Init Indirect Registers UNSUCCESSFULLY. > Indirect Registers failed verification. > Module 1: FAILED FXS (FCC) > Module 2: Installed -- AUTO FXO (FCC mode) > Module 3: Installed -- AUTO FXO (FCC mode) > Found a Wildcard TDM: Wildcard TDM400P REV I (2 modules) > > > Thanks, > MikeC > > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > lists.digium.com/mailman/listinfo/asterisk-users >
Possibly Parallel Threads
- Problem installing FXS module in old digium 4 channel tdm card
- TDM2400: some FXS module fail
- [PATCH] core: Incorrect detection of EDD in /core/fs/diskio_bios.c
- A bug in command localboot was introduced in version 6.03.
- The simple menu system doesn't work with serial console